Dielectrics for long term space exposure and spacecraft charging: A briefing

Charging of dielectrics is a bulk, not a surface property. Radiation driven charge stops within the bulk and is not quickly conducted to the surface. Very large electric fields develop in the bulk due to this stopped charge. At space radiation levels, it typically requires hours or days for the internal electric fields to reach steady state. The resulting electric fields are large enough to produce electrical failure within the insulator. This type failure is thought to produce nearly all electric discharge anomalies. Radiation also induces bond breakage, creates reactive radicals, displaces atoms and, in general, severely changes the chemistry of the solid state material. Electric fields can alter this process by reacting with charged species, driving them through the solid. Irradiated polymers often lose as much as a percent of their mass, or more, at exposures typical in space. Very different aging or contaminant emission can be induced by the stopped charge electric fields. These radiation effects are detailed

Results of literature search on dielectric properties and electron interaction phenomena related to spacecraft charging

The objective of the literature search was to determine the required material properties and electron interaction parameters needed for modeling charge buildup and breakdown in insulators. A brief overview of the results of the literature search is given. A partial list of the references covered is included in a bibliography. Although inorganic insulators were also considered in the search, coverage is limited to the organics, primarily Kapton and Teflon

Radiation-induced insulator discharge pulses in the CRRES internal discharge monitor satellite experiment

The Internal Discharge Monitor (IDM) was designed to observe electrical pulses from common electrical insulators in space service. The sixteen insulator samples included twelve planar printed circuit boards and four cables. The samples were fully enclosed, mutually isolated, and space radiation penetrated 0.02 cm of aluminum before striking the samples. Pulsing began on the seventh orbit, the maximum pulse rate occurred on the seventeenth orbit when 13 pulses occurred, and the pulses slowly diminished to about one per 3 orbits six months later. After 8 months, the radiation belts abruptly increased and the pulse rates attained a new high. These pulse rates were in agreement with laboratory experience on shorter time scales. Several of the samples never pulsed. If the pulses were not confined within IDM, the physical processes could spread to become a full spacecraft anomaly. The IDM results indicate the rate at which small insulator pulses occur. Small pulses are the seeds of larger satellite electrical anomalies. The pulse rates are compared with space radiation intensities, L shell location, and spectral distributions from the radiation spectrometers on the Combined Release and Radiation Effects Satellite

Experimentally Derived Resistivity for Dielectric Samples From the CRRES Internal Discharge Monitor

Resistivity values were experimentally determined using charge storage methods for six samples remaining from the construction of the Internal Discharge Monitor (IDM) flown on the Combined Release and Radiation Effects Satellite (CRRES). Three tests were performed over a period of four to five weeks each in a vacuum of ~5×10-6 torr with an average temperature of ~25 ºC to simulate a space environment. Samples tested included FR4, PTFE, and alumina with copper electrodes attached to one or more of the sample surfaces. FR4 circuit board material was found to have a dark current resistivity of ~1×1018 Ω-cm and a moderately high polarization current. Fiber filled PTFE exhibited little polarization current and a dark current resistivity of ~3×1020 Ω-cm. Alumina had a measured dark current resistivity of ~3·1017 Ω-cm, with a very large and more rapid polarization. Experimentally determined resistivity values were two to three orders of magnitude more than found using standard ASTM test methods. The one minute wait time suggested for the standard ASTM tests is much shorter than the measured polarization current decay times for each sample indicating that the primary currents used to determine ASTM resistivity are caused by the polarization of molecules in the applied electric field rather than charge transport through the bulk of the dielectric. Testing over much longer periods of time in vacuum is required to allow this polarization current to decay away and to allow the observation of charged particles transport through a dielectric material. Application of a simple physics-based model allows separation of the polarization current and dark current components from long duration measurements of resistivity over day- to month-long time scales. Model parameters are directly related to the magnitude of charge transfer and storage and the rate of charge transport

B-Amyloid of Alzheimer\u27s Disease Induces Reactive Gliosis that Inhibits Axonal Outgrowth

Pathological lesions in the brains of patients with Alzheimer\u27s disease (AD) are characterized by dense deposits of the protein ,B-amyloid. The link between the deposition of B-amyloid in senile plaques and AD-associated pathology is, at present, controversial since there have been conflicting reports on whether the 39- 43 amino acid B-amyloid sequence is toxic or trophic to neurons. In this report, we show that B-amyloid peptide when presented as an insoluble substrate which mimics its conformation in vivo can induce cortical glial cells in vitro and in vivo to locally deposit chondroitin sulfate containingproteoglycan. In vitro the proteoglycan-containing matrix deposited by glia on B-amyloid blocks the usual ability of the peptide to allow cortical neurons to adhere and grow. Chondroitin sulfate-containing proteoglycan was also found in senile plaques of human AD tissue. We suggest that an additional effect of B-amyloid in the brain, which compounds the direct effects of ,8- amyloid on neurons, is mediated by the stimulation of astroglia to become reactive. Once in the reactive state, glial cells deposit large amounts of growth-inhibitory molecules within the neuropil which could impair neuronal process survival and regeneration leading to neurite retraction and/or dystrophy around senile plaques in AD

Matroid and Knapsack Center Problems

In the classic $k$-center problem, we are given a metric graph, and the objective is to open $k$ nodes as centers such that the maximum distance from any vertex to its closest center is minimized. In this paper, we consider two important generalizations of $k$-center, the matroid center problem and the knapsack center problem. Both problems are motivated by recent content distribution network applications. Our contributions can be summarized as follows: 1. We consider the matroid center problem in which the centers are required to form an independent set of a given matroid. We show this problem is NP-hard even on a line. We present a 3-approximation algorithm for the problem on general metrics. We also consider the outlier version of the problem where a given number of vertices can be excluded as the outliers from the solution. We present a 7-approximation for the outlier version. 2. We consider the (multi-)knapsack center problem in which the centers are required to satisfy one (or more) knapsack constraint(s). It is known that the knapsack center problem with a single knapsack constraint admits a 3-approximation. However, when there are at least two knapsack constraints, we show this problem is not approximable at all. To complement the hardness result, we present a polynomial time algorithm that gives a 3-approximate solution such that one knapsack constraint is satisfied and the others may be violated by at most a factor of $1+\epsilon$. We also obtain a 3-approximation for the outlier version that may violate the knapsack constraint by $1+\epsilon$.Comment: A preliminary version of this paper is accepted to IPCO 201

Selection from read-only memory with limited workspace

Given an unordered array of $N$ elements drawn from a totally ordered set and an integer $k$ in the range from $1$ to $N$, in the classic selection problem the task is to find the $k$-th smallest element in the array. We study the complexity of this problem in the space-restricted random-access model: The input array is stored on read-only memory, and the algorithm has access to a limited amount of workspace. We prove that the linear-time prune-and-search algorithm---presented in most textbooks on algorithms---can be modified to use $\Theta(N)$ bits instead of $\Theta(N)$ words of extra space. Prior to our work, the best known algorithm by Frederickson could perform the task with $\Theta(N)$ bits of extra space in $O(N \lg^{*} N)$ time. Our result separates the space-restricted random-access model and the multi-pass streaming model, since we can surpass the $\Omega(N \lg^{*} N)$ lower bound known for the latter model. We also generalize our algorithm for the case when the size of the workspace is $\Theta(S)$ bits, where $\lg^3{N} \leq S \leq N$. The running time of our generalized algorithm is $O(N \lg^{*}(N/S) + N (\lg N) / \lg{} S)$, slightly improving over the $O(N \lg^{*}(N (\lg N)/S) + N (\lg N) / \lg{} S)$ bound of Frederickson's algorithm. To obtain the improvements mentioned above, we developed a new data structure, called the wavelet stack, that we use for repeated pruning. We expect the wavelet stack to be a useful tool in other applications as well.Comment: 16 pages, 1 figure, Preliminary version appeared in COCOON-201

Successful use of axonal transport for drug delivery by synthetic molecular vehicles

We report the use of axonal transport to achieve intraneural drug delivery. We constructed a novel tripartite complex of an axonal transport facilitator conjugated to a linker molecule bearing up to a hundred reversibly attached drug molecules. The complex efficiently enters nerve terminals after intramuscular or intradermal administration and travels within axonal processes to neuron cell bodies. The tripartite agent provided 100-fold amplification of saturable neural uptake events, delivering multiple drug molecules per complex. _In vivo_, analgesic drug delivery to systemic and to non-targeted neural tissues was greatly reduced compared to existing routes of administration, thus exemplifying the possibility of specific nerve root targeting and effectively increasing the potency of the candidate drug gabapentin 300-fold relative to oral administration

Mode-coupling theory for multiple-time correlation functions of tagged particle densities and dynamical filters designed for glassy systems

The theoretical framework for higher-order correlation functions involving multiple times and multiple points in a classical, many-body system developed by Van Zon and Schofield [Phys. Rev. E 65, 011106 (2002)] is extended here to include tagged particle densities. Such densities have found an intriguing application as proposed measures of dynamical heterogeneities in structural glasses. The theoretical formalism is based upon projection operator techniques which are used to isolate the slow time evolution of dynamical variables by expanding the slowly-evolving component of arbitrary variables in an infinite basis composed of the products of slow variables of the system. The resulting formally exact mode-coupling expressions for multiple-point and multiple-time correlation functions are made tractable by applying the so-called N-ordering method. This theory is used to derive for moderate densities the leading mode coupling expressions for indicators of relaxation type and domain relaxation, which use dynamical filters that lead to multiple-time correlations of a tagged particle density. The mode coupling expressions for higher order correlation functions are also succesfully tested against simulations of a hard sphere fluid at relatively low density.Comment: 15 pages, 2 figure