Solid-State Excitation Laser for Laser-Ultrasonics

The inspection speed of laser-ultrasonics compared with conventional ultrasonic testing is limited by the pulse repetition rate of the excitation laser. The maximum pulse repetition rate reported up to now for CO2-lasers, which are presently used for nearly all systems, is in the range of 400 Hz. In this paper a new approach based on a diode-pumped solid-state laser is discussed, which is currently being developed. This new excitation laser is designed for a repetition rate of 1 kHz and will operate at a mid-IR wavelength of 3.3 m. The higher repeti-tion rate enables a higher inspection speed, whereas the mid-IR wavelength anticipates a better coupling efficiency. The total power for pumping the laser crystals is transported via flexible optical fibres to the compact laser head, thus allowing operation on a robot arm. The laser head consists of a master oscillator feeding several lines of power amplifiers and in-cludes nonlinear optical wavelength conversion by an optical parametric process. It is char-acterized by a modular construction which provides optimal conditions for operation at high average power as well as for easy maintenance. These features will enable building reliable, long-lived, rugged, smart laser ultrasonic systems in futur

Power Electronics Technology for Large-Scale Renewable Energy Generation

Grid integration of renewable energy (REN) requires efficient and reliable power conversion stages, particularly with an increasing demand for high controllability and flexibility seen from the grid side. Underpinned by advanced control and information technologies, power electronics converters play an essential role in large-scale REN generation. However, the use of power converters has also exposed several challenges in conventional power grids, e.g., reducing the system inertia. In this article, grid integration using power electronics is presented for large-scale REN generation. Technical issues and requirements are discussed with a special focus on grid-connected wind, solar photovoltaic, and energy storage systems. In addition, the core of the energy generation and conversion—control for individual power converters (e.g., general current control) and for the system level (e.g., coordinated operation of large-scale energy systems)—is briefly discussed. Future research perspectives are then presented, which further advance large-scale REN generation technologies by incorporating more power electronics systems

Direct measurement of diurnal polar motion by ring laser gyroscopes

We report the first direct measurements of the very small effect of forced diurnal polar motion, successfully observed on three of our large ring lasers, which now measure the instantaneous direction of Earth's rotation axis to a precision of 1 part in 10^8 when averaged over a time interval of several hours. Ring laser gyroscopes provide a new viable technique for directly and continuously measuring the position of the instantaneous rotation axis of the Earth and the amplitudes of the Oppolzer modes. In contrast, the space geodetic techniques (VLBI, SLR, GPS, etc.) contain no information about the position of the instantaneous axis of rotation of the Earth, but are sensitive to the complete transformation matrix between the Earth-fixed and inertial reference frame. Further improvements of gyroscopes will provide a powerful new tool for studying the Earth's interior.Comment: 5 pages, 4 figures, agu2001.cl

Modelling of point and non-point source pollution of nitrate with SWAT in the river Dill, Germany

International audienceWe used the Soil and Water Assessment Tool (SWAT) to simulate point and non-point source pollution of nitrate in a mesoscale mountainous catchment. The results show that the model efficiency for daily discharge is 0.81 for the calibration period (November 1990 to December 1993) and 0.56 for the validation period (April 2000 to January 2003). The model efficiency for monthly nitrate load is 0.66 and 0.77 for the calibration period (April 2000 to March 2002) and validation period (April 2002 to January 2003), respectively. However, the model efficiency for daily loads is low (0.15), which cannot only be attributed to the quality of input data of point source effluents. An analysis of the internal fluxes and cycles of nitrogen pointed out considerable weaknesses in the models conceptualisation of the nitrogen modules which will be improved in future research

Assessing the model performance of an integrated hydrological and biogeochemical model for discharge and nitrate load predictions

International audienceIn this study, we evaluate the performance of the SWAT-N model, a modified version of the widely used SWAT version, for discharge and nitrate predictions at the mesoscale Dill catchment (Germany) for a 5-year period. The underlying question is, whether the model efficiency is sufficient for scenario analysis of land-use changes on both water quantity and quality. The Shuffled Complex Evolution (SCE-UA) algorithm is used to calibrate the model for daily discharge at the catchments outlet. Model performance is assessed with a split-sampling as well as a proxy-basin test using recorded hydrographs of four additional gauges located within the catchment. The efficiency regarding nitrate load simulation is assessed without further calibration on a daily, log-daily, weekly, and monthly basis as compared to observations derived from an intensive sampling campaign conducted at the catchments outlet. A new approach is employed to test the spatial consistency of the model, where simulated longitudinal profiles of nitrate concentrations were compared with observed longitudinal profiles. It is concluded that the model efficiency of SWAT-N is sufficient for the assessment of scenarios for daily discharge predictions. SWAT-N can be employed without further calibration for nitrate load simulations on both a weekly and monthly basis with an acceptable degree of accuracy. However, the model efficiency for daily nitrate load is insufficient, which can be attributed to both data uncertainty (i.e. point-source effluents and actual farming practise) as well as structural errors. The simulated longitudinal profiles meet the observations reasonably well, which suggests that the model is spatially consistent

Drag Assessment for Boundary Layer Control Schemes with Mass Injection

The present study considers uniform blowing in turbulent boundary layers as active flow control scheme for drag reduction on airfoils. The focus lies on the important question of how to quantify the drag reduction potential of this control scheme correctly. It is demonstrated that mass injection causes the body drag (the drag resulting from the stresses on the body) to differ from the wake survey drag (the momentum deficit in the wake of an airfoil), which is classically used in experiments as a surrogate for the former. This difference is related to the boundary layer control (BLC) penalty, an unavoidable drag portion which reflects the effort of a mass-injecting boundary layer control scheme. This is independent of how the control is implemented. With an integral momentum budget, we show that for the present control scheme, the wake survey drag contains the BLC penalty and is thus a measure for the inclusive drag of the airfoil, i.e. the one required to determine net drag reduction. The concept of the inclusive drag is extended also to boundary layers using the von Karman equation. This means that with mass injection the friction drag only is not sufficient to assess drag reduction also in canonical flows. Large Eddy Simulations and Reynolds-averaged Navier-Stokes simulations of the flow around airfoils are utilized to demonstrate the significance of this distinction for the scheme of uniform blowing. When the inclusive drag is properly accounted for, control scenarios previously considered to yield drag reduction actually show drag increase