Novel use of Steinman pin in removal of broken interlocking screws

Broken screws after interlocking nailing of long bones are commonly seen in Orthopaedic practice. Removal of such screws can be difficult particularly the distal part which is often held within the bone. We describe a simple technique of using Steinman pin to aid removal of broken screws in a case of non-union fracture tibia with broken interlocking nail and screws. Steinman pin being easily available and the reproducible technique make it a useful aid for removal of broken interlocking screws

Death and Emergency Readmission of Infants Discharged After Interventions for Congenital Heart Disease: A National Study of 7643 Infants to Inform Service Improvement.

Improvements in hospital-based care have reduced early mortality in congenital heart disease. Later adverse outcomes may be reducible by focusing on care at or after discharge. We aimed to identify risk factors for such events within 1 year of discharge after intervention in infancy and, separately, to identify subgroups that might benefit from different forms of intervention.Cardiac procedures performed in infants between 2005 and 2010 in England and Wales from the UK National Congenital Heart Disease Audit were linked to intensive care records. Among 7976 infants, 333 (4.2%) died before discharge. Of 7643 infants discharged alive, 246 (3.2%) died outside the hospital or after an unplanned readmission to intensive care (risk factors were age, weight-for-age, cardiac procedure, cardiac diagnosis, congenital anomaly, preprocedural clinical deterioration, prematurity, ethnicity, and duration of initial admission; c-statistic 0.78 [0.75-0.82]). Of the 7643, 514 (6.7%) died outside the hospital or had an unplanned intensive care readmission (same risk factors but with neurodevelopmental condition and acquired cardiac diagnosis and without preprocedural deterioration; c-statistic 0.78 [0.75-0.80]). Classification and regression tree analysis were used to identify 6 subgroups stratified by the level (3-24%) and nature of risk for death outside the hospital or unplanned intensive care readmission based on neurodevelopmental condition, cardiac diagnosis, congenital anomaly, and duration of initial admission. An additional 115 patients died after planned intensive care admission (typically following elective surgery).Adverse outcomes in the year after discharge are of similar magnitude to in-hospital mortality, warrant service improvements, and are not confined to diagnostic groups currently targeted with enhanced monitoring

Quality of medication use in primary care - mapping the problem, working to a solution: a systematic review of the literature

Background: The UK, USA and the World Health Organization have identified improved patient safety in healthcare as a priority. Medication error has been identified as one of the most frequent forms of medical error and is associated with significant medical harm. Errors are the result of the systems that produce them. In industrial settings, a range of systematic techniques have been designed to reduce error and waste. The first stage of these processes is to map out the whole system and its reliability at each stage. However, to date, studies of medication error and solutions have concentrated on individual parts of the whole system. In this paper we wished to conduct a systematic review of the literature, in order to map out the medication system with its associated errors and failures in quality, to assess the strength of the evidence and to use approaches from quality management to identify ways in which the system could be made safer. Methods: We mapped out the medicines management system in primary care in the UK. We conducted a systematic literature review in order to refine our map of the system and to establish the quality of the research and reliability of the system. Results: The map demonstrated that the proportion of errors in the management system for medicines in primary care is very high. Several stages of the process had error rates of 50% or more: repeat prescribing reviews, interface prescribing and communication and patient adherence. When including the efficacy of the medicine in the system, the available evidence suggested that only between 4% and 21% of patients achieved the optimum benefit from their medication. Whilst there were some limitations in the evidence base, including the error rate measurement and the sampling strategies employed, there was sufficient information to indicate the ways in which the system could be improved, using management approaches. The first step to improving the overall quality would be routine monitoring of adherence, clinical effectiveness and hospital admissions. Conclusion: By adopting the whole system approach from a management perspective we have found where failures in quality occur in medication use in primary care in the UK, and where weaknesses occur in the associated evidence base. Quality management approaches have allowed us to develop a coherent change and research agenda in order to tackle these, so far, fairly intractable problems

Corticospinal excitability is facilitated by combined action observation and motor imagery of a basketball free throw

Copyright © 2018 The Authors. Objectives: This experiment investigated the extent to which independent action observation, independent motor imagery and combined action observation and motor imagery of a sport-related motor skill elicited activity within the motor system. Design and method: Eighteen, right-handed, male participants engaged in four conditions following a repeated measures design. The experimental conditions involved action observation, motor imagery, or combined action observation and motor imagery of a basketball free throw, whilst the control condition involved observation of a static image of a basketball player holding a basketball. In all conditions, single pulse transcranial magnetic stimulation was delivered to the forearm representation of the left motor cortex. The amplitude of the resulting motor evoked potentials were recorded from the flexor carpi ulnaris and extensor carpi ulnaris muscles of the right forearm and used as a marker of corticospinal excitability. Results: Corticospinal excitability was facilitated significantly by combined action observation and motor imagery of the basketball free throw, in comparison to both the action observation and control conditions. In contrast, the independent use of either action observation or motor imagery did not facilitate corticospinal excitability compared to the control condition. Conclusions: The findings have implications for the design and delivery of action observation and motor imagery interventions in sport. As corticospinal excitability was facilitated by the use of combined action observation and motor imagery, researchers should seek to establish the efficacy of implementing combined action observation and motor imagery interventions for improving motor skill performance and learning in applied sporting settings

Development and characterisation of dental composites containing anisotropic fluorapatite bundles and rods

Objectives: To develop dental composites incorporating fluorapatite (FA) crystals as a secondary filler and to characterise degree of conversion, key mechanical properties and fluoride release. Methods: FA rod-like crystals and bundles were hydrothermally synthesised and characterised by scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDS), X-ray diffraction (XRD) and 19F MAS-NMR. Composites were formulated containing BisGMA/TEGDMA/BisEMA and barium-aluminium-silicate glass (0FA). FA crystals were incorporated at 10 (10FA), 20 (20FA), 30 (30FA) and 40 wt% (40FA) maintaining a filler content of 80 wt% (63–67 vol%). Degree of conversion (DC), flexural strength (FS), flexural modulus (FM), fracture toughness (K1C), Vickers hardness (HV) and 2-body wear were measured. Fluoride release was measured in neutral and acidic buffers. Results: XRD and 19F MAS-NMR confirmed that only FA was formed, whilst SEM revealed the presence of single rods and bundles of nano-rods. DC ranged between 56–60% (p > 0.05). FA composites showed lower FM and lower FS (p 0.05) to 0FA. 30FA and 40FA showed similar K1C to 0FA (p > 0.05), with SEM showing evidence of toughening mechanisms, whereas 10FA and 20FA showed lower K1C (p < 0.05). FA containing composites released fluoride that was proportional to the amount of FA incorporated (p < 0.05) but only under acidic conditions. Significance: The addition of FA to the experimental composites reduced strength and stiffness but not the DC, hardness or wear rate. 30FA and 40FA had a higher K1C compared to other FA groups. Fluoride release occurred under an accelerated acidic regime, suggesting potential as a bioactive ‘smart’ composite

Improving Risk Adjustment for Mortality After Pediatric Cardiac Surgery: The UK PRAiS2 Model

BACKGROUND: Partial Risk Adjustment in Surgery (PRAiS), a risk model for 30-day mortality after children's heart surgery, has been used by the UK National Congenital Heart Disease Audit to report expected risk-adjusted survival since 2013. This study aimed to improve the model by incorporating additional comorbidity and diagnostic information. METHODS: The model development dataset was all procedures performed between 2009 and 2014 in all UK and Ireland congenital cardiac centers. The outcome measure was death within each 30-day surgical episode. Model development followed an iterative process of clinical discussion and development and assessment of models using logistic regression under 25 × 5 cross-validation. Performance was measured using Akaike information criterion, the area under the receiver-operating characteristic curve (AUC), and calibration. The final model was assessed in an external 2014 to 2015 validation dataset. RESULTS: The development dataset comprised 21,838 30-day surgical episodes, with 539 deaths (mortality, 2.5%). The validation dataset comprised 4,207 episodes, with 97 deaths (mortality, 2.3%). The updated risk model included 15 procedural, 11 diagnostic, and 4 comorbidity groupings, and nonlinear functions of age and weight. Performance under cross-validation was: median AUC of 0.83 (range, 0.82 to 0.83), median calibration slope and intercept of 0.92 (range, 0.64 to 1.25) and -0.23 (range, -1.08 to 0.85) respectively. In the validation dataset, the AUC was 0.86 (95% confidence interval [CI], 0.82 to 0.89), and the calibration slope and intercept were 1.01 (95% CI, 0.83 to 1.18) and 0.11 (95% CI, -0.45 to 0.67), respectively, showing excellent performance. CONCLUSIONS: A more sophisticated PRAiS2 risk model for UK use was developed with additional comorbidity and diagnostic information, alongside age and weight as nonlinear variables

Absence of association between behavior problems in childhood and hypertension in midlife

Background It is known that behavior in childhood is associated with certain physical and mental health problems in midlife. However, there is limited evidence on the role of childhood behavior problems in the development of hypertension in adulthood. The present study aimed to examine whether behavior problems in childhood influenced the risk of hypertension in midlife in the United Kingdom 1958 birth cohort. Methods The 1958 British birth cohort comprised 17,638 individuals born in the first week of March 1958 in the United Kingdom. Behavior problems were assessed at 7, 11, and 16 years of age by parents and teachers. At age 45, blood pressure was measured and hypertension was recorded if blood pressure was ≥140/90 mm Hg or if the participants were informed by their health professionals that they had high blood pressure. Behavioral information was reported according to the Rutter Children's Behaviour Questionnaire (RCBQ) and the Bristol Social Adjustment Guide (BSAG). Odds ratios (ORs) and 95% confidence intervals (CIs) were calculated to examine behavior problems in childhood in relation to hypertension at 45 years of age according to logistic regression analysis, with adjustment for sex, social class in childhood and adulthood, childhood cognition, birth weight, gestational age at birth, body mass index (BMI), smoking, alcohol consumption, and physical activity. Results Behavior problems reported by parents at 7, 11, and 16 years were not associated with hypertension in midlife (OR, 0.93; 95% CI, 0.81, 1.07; OR, 0.95; 95% CI, 0.81, 1.11; OR, 0.98; 95% CI, 0.85, 1.12, respectively). Similarly, teacher-reported behavior problems at 7, 11, and 16 years were not associated with hypertension in midlife (OR, 0.92; 95% CI, 0.72, 1.18; OR, 0.92; 95% CI, 0.84, 1.02; OR, 1.03; 95% CI, 0.92, 1.15, respectively). Further separate analyses showed similar results for males and females. Conclusion There is no association between behavior problems in childhood and hypertension in midlife

Robotic milking technologies and renegotiating situated ethical relationships on UK dairy farms

Robotic or automatic milking systems (AMS) are novel technologies that take over the labor of dairy farming and reduce the need for human-animal interactions. Because robotic milking involves the replacement of 'conventional' twice-a-day milking managed by people with a system that supposedly allows cows the freedom to be milked automatically whenever they choose, some claim robotic milking has health and welfare benefits for cows, increases productivity, and has lifestyle advantages for dairy farmers. This paper examines how established ethical relations on dairy farms are unsettled by the intervention of a radically different technology such as AMS. The renegotiation of ethical relationships is thus an important dimension of how the actors involved are re-assembled around a new technology. The paper draws on in-depth research on UK dairy farms comparing those using conventional milking technologies with those using AMS. We explore the situated ethical relations that are negotiated in practice, focusing on the contingent and complex nature of human-animal-technology interactions. We show that ethical relations are situated and emergent, and that as the identities, roles, and subjectivities of humans and animals are unsettled through the intervention of a new technology, the ethical relations also shift. © 2013 Springer Science+Business Media Dordrecht

A tool for measuring mental workload during prosthesis use: The Prosthesis Task Load Index (PROS-TLX)

When using a upper-limb prosthesis, mental, emotional, and physical effort is often experienced. These have been linked to high rates of device dissatisfaction and rejection. Therefore, understanding and quantifying the complex nature of workload experienced when using, or learning to use, a upper-limb prosthesis has practical and clinical importance for researchers and applied professionals. The aim of this paper was to design and validate a self-report measure of mental workload specific to prosthesis use (The Prosthesis Task Load Index; PROS-TLX) that encapsulates the array of mental, physical, and emotional demands often experienced by users of these devices. We first surveyed upper-limb prosthetic limb users who confirmed the importance of eight workload constructs taken from published literature and previous workload measures. These constructs were mental demands, physical demands, visual demands, conscious processing, frustration, situational stress, time pressure and device uncertainty. To validate the importance of these constructs during initial prosthesis learning, we then asked able-bodied participants to complete a coin-placement task using their anatomical hand and then using a myoelectric prosthesis simulator under low and high mental workload. As expected, using a prosthetic hand resulted in slower movements, more errors, and a greater tendency to visually fixate the hand (indexed using eye-tracking equipment). These changes in performance were accompanied by significant increases in PROS-TLX workload subscales. The scale was also found to have good convergent and divergent validity. Further work is required to validate whether the PROS-TLX can provide meaningful clinical insights to the workload experienced by clinical users of prosthetic devices

Measuring Multi-Joint Stiffness during Single Movements: Numerical Validation of a Novel Time-Frequency Approach

This study presents and validates a Time-Frequency technique for measuring 2-dimensional multijoint arm stiffness throughout a single planar movement as well as during static posture. It is proposed as an alternative to current regressive methods which require numerous repetitions to obtain average stiffness on a small segment of the hand trajectory. The method is based on the analysis of the reassigned spectrogram of the arm's response to impulsive perturbations and can estimate arm stiffness on a trial-by-trial basis. Analytic and empirical methods are first derived and tested through modal analysis on synthetic data. The technique's accuracy and robustness are assessed by modeling the estimation of stiffness time profiles changing at different rates and affected by different noise levels. Our method obtains results comparable with two well-known regressive techniques. We also test how the technique can identify the viscoelastic component of non-linear and higher than second order systems with a non-parametrical approach. The technique proposed here is very impervious to noise and can be used easily for both postural and movement tasks. Estimations of stiffness profiles are possible with only one perturbation, making our method a useful tool for estimating limb stiffness during motor learning and adaptation tasks, and for understanding the modulation of stiffness in individuals with neurodegenerative diseases