717 research outputs found
Vitamin E as Adjuvant in Emulsified Vaccine for Chicks
Abstract Mineral oil was partially replaced with D, L-α-tocopheryl acetate (vitamin E) in bacterial and viral inactivated emulsified vaccines. Vitamin E increased the immune response to the viral antigen (Newcastle disease virus) used but not to the bacterial antigen (Escherichia coli) when its presence in the oil phase did not exceed 30%. Inoculated vitamin E may have enhanced the immune response by interacting with the immune-competent cells involved in the inflammatory reaction that followed inoculation of emulsified vaccines
Factors Affecting Prognosis and Prediction of Outcome in Cystic Fibrosis Lung Disease
Cystic fibrosis (CF) is a multisystem disorder with a significantly shortened life expectancy with the major cause of mortality related to lung disease. Inflammation is seen in the CF airways from a very early age and contributes significantly to symptoms and disease progression. As the condition worsens over time, lung function declines, usually measured by Forced Expiratory Volume in 1 second (FEV1)% predicted, and extra-pulmonary complications often manifest. While the life expectancy in CF is still short, the median age of death and predicted survival age are continually increasing. Therapeutic interventions for CF have improved significantly in the last 20 years and now there are targeted therapies towards specific elements in CF that may impact upon exacerbation frequency, symptoms, and eventually mortality due to lung disease
Thermoreflectance investigation of the antiferromagnetic and paramagnetic phases of Cr
Thermoreflectance measurements have been performed on Cr single crystals at several temperatures above and below the Néel temperature. We observe dramatic changes induced by the magnetic phase transition. In contrast, static optical data fail to show appreciable differences in the (0.5-5.0)-eV photon-energy range. Magnetic ordering gives rise to the disappearance of transitions involving specific regions of the Fermi surface. New critical-point absorptions appear at the boundaries of the new Brillouin zone in antiferromagnetic Cr. Most of the observed experimental features have been identified by comparison with recent band-structure calculations
In-depth investigation of the safety of wooden shelves used for traditional cheese ripening
The main goal of this research was to characterize the bacterial diversity of the wooden boards used for aging traditional Sicilian cheeses and to evaluate whether pathogenic bacteria are associated with these surfaces. Eighteen cheese dairy factories producing three traditional cheese typologies (PDO Pecorino Siciliano, PDO Piacentinu Ennese, and Caciocavallo Palermitano) were selected within the region of Sicily. The wooden shelf surfaces were sampled by a destructive method to detach wood splinters as well as by a nondestructive brushing to collect microbial cells. Scanning electron microscopy showed the presence of almost continuous bacterial formations on the majority of the shelves analyzed. Yeasts and fungal hyphae were also visualized, indicating the complexity of the plank communities. The amplicon library of the 16S rRNA gene V3-V4 region was paired-end sequenced using the Illumina MiSeq system, allowing the identification of 14 phyla, 32 classes, 52 orders, 93 families, and 137 genera. Staphylococcus equorum was identified from all wooden surfaces, with a maximum abundance of 64.75%. Among cheese-surface-ripening bacteria, Brevibacterium and Corynebacterium were detected in almost all samples. Several halophilic (Halomonas, Tetragenococcus halophilus, Chromohalobacter, Salimicrobium, Marinococcus, Salegentibacter, Haererehalobacter, Marinobacter, and Idiomarinaceae) and moderately halophilic (Salinicoccus, Psychrobacter, and Salinisphaera) bacteria were frequently identified. Lactic acid bacteria (LAB) were present at low percentages in the genera Leuconostoc, Lactococcus, Lactobacillus, Pediococcus, and Streptococcus. The levels of viable microorganisms on the wooden shelves ranged between 2.4 and 7.8 log CFU/cm2. In some cases, LAB were counted at very high levels (8.2 log CFU/cm2). Members of the Enterobacteriaceae family were detected in a viable state for only six samples. Coagulase-positive staphylococci, Salmonella spp., and Listeria monocytogenes were not detected. Seventy-five strains belonged to the genera Leuconostoc, Lactococcus, Pediococcus, Enterococcus, Lactobacillus, and Weissella. IMPORTANCE This study provides evidence for the lack of pathogenic bacteria on the wooden shelves used to ripen internal bacterially ripened semihard and hard cheeses produced in Sicily. These three cheeses are not inoculated on their surfaces, and surface ripening is not considered to occur or, at least, does not occur at the same extent as surface-inoculated smear cheeses. Several bacterial groups identified from the wooden shelves are typically associated with smear cheeses, strongly suggesting that PDO Pecorino Siciliano, PDO Piacentinu Ennese, and Caciocavallo Palermitano cheese rind contributes to their final organoleptic profiles
Structure and Strength of Dislocation Junctions: An Atomic Level Analysis
The quasicontinuum method is used to simulate three-dimensional
Lomer-Cottrell junctions both in the absence and in the presence of an applied
stress. The simulations show that this type of junction is destroyed by an
unzipping mechanism in which the dislocations that form the junction are
gradually pulled apart along the junction segment. The calculated critical
stress needed for breaking the junction is comparable to that predicted by line
tension models. The simulations also demonstrate a strong influence of the
initial dislocation line directions on the breaking mechanism, an effect that
is neglected in the macroscopic treatment of the hardening effect of junctions.Comment: 4 pages, 3 figure
In vitro evaluation of live attenuated vaccines against Salmonella enteritidis: humoral immune response
Salmonella enteritidis (SE) vaccination is one of the major tool to reduce the infection in commercial poultry. In this work, techniques, evaluating the presence of Ig-G and Ig-A in serum, tears and intestinal secretions, were studied to improve the knowledge of the humoral immune response following SE live attenuated vaccination. The Ig-G and Ig-A ELISA are important and easy tests to plan and optimize SE vaccination programs
Tracking the transfer of antimicrobial resistance genes from raw materials to sourdough breads
The present study hypothesizes that raw materials used in bread making can transfer antibiotic resistance genes (ARGs) to processed breads. Four types of flour and four types of semolina were purchased from supermarkets
and inoculated with a commercial dried sourdough starter to make breads. The microbiological characteristics of all raw materials and fermented doughs were investigated. The levels of yeasts and lactic acid bacteria (LAB)
increased up to 107 CFU/g. The values of pH decreased to 4.54–4.86 while total titratable acidity increased inversely. All unprocessed and processed samples, including breads, were analyzed by a molecular approach to
detect bacterial and fungal DNAs and 17 antibiotic resistance genes for penicillins, macrolides, tetracyclines, and chloramphenicol. Illumina technology showed that the operational taxonomy units (OTUs) identified from unprocessed
wheat milling products, fermented doughs, and baked products mainly belonged to Acetobacteraceae.
Enterococci were present in all doughs. After baking, the relative abundance (RA)% of Enterococcus and Acetobacteraceae decreased. The DNA analyzed for fungal composition showed that Kazachstania humilis dominated
dried sourdough starter and doughs, and its OTUs were also detected at high RA% in baked products. The search for ARGs revealed that all samples analyzed did not show resistance to penicillins, chloramphenicol, and macrolides.
However, three of the semolinas included in this study (S1, S3 and S4) and the corresponding doughs (SD1, SD3 and SD4) were positive for tet(A) and tet(B) resistance genes. This work indicated that breads have a limited role in the dissemination of ARGs
Tracking the transfer of antimicrobial resistance genes from raw materials to sourdough breads
The present study hypothesizes that raw materials used in bread making can transfer antibiotic resistance genes (ARGs) to processed breads. Four types of flour and four types of semolina were purchased from supermarkets and inoculated with a commercial dried sourdough starter to make breads. The microbiological characteristics of all raw materials and fermented doughs were investigated. The levels of yeasts and lactic acid bacteria (LAB) increased up to 107 CFU/g. The values of pH decreased to 4.54–4.86 while total titratable acidity increased inversely. All unprocessed and processed samples, including breads, were analyzed by a molecular approach to detect bacterial and fungal DNAs and 17 antibiotic resistance genes for penicillins, macrolides, tetracyclines, and chloramphenicol. Illumina technology showed that the operational taxonomy units (OTUs) identified from unprocessed wheat milling products, fermented doughs, and baked products mainly belonged to Acetobacteraceae. Enterococci were present in all doughs. After baking, the relative abundance (RA)% of Enterococcus and Acetobacteraceae decreased. The DNA analyzed for fungal composition showed that Kazachstania humilis dominated dried sourdough starter and doughs, and its OTUs were also detected at high RA% in baked products. The search for ARGs revealed that all samples analyzed did not show resistance to penicillins, chloramphenicol, and macrolides. However, three of the semolinas included in this study (S1, S3 and S4) and the corresponding doughs (SD1, SD3 and SD4) were positive for tet(A) and tet(B) resistance genes. This work indicated that breads have a limited role in the dissemination of ARG
Mesoscopic Analysis of Structure and Strength of Dislocation Junctions in FCC Metals
We develop a finite element based dislocation dynamics model to simulate the
structure and strength of dislocation junctions in FCC crystals. The model is
based on anisotropic elasticity theory supplemented by the explicit inclusion
of the separation of perfect dislocations into partial dislocations bounding a
stacking fault. We demonstrate that the model reproduces in precise detail the
structure of the Lomer-Cottrell lock already obtained from atomistic
simulations. In light of this success, we also examine the strength of
junctions culminating in a stress-strength diagram which is the locus of points
in stress space corresponding to dissolution of the junction.Comment: 9 Pages + 4 Figure
- …