Probabilistic time variant assessment of thin-walled steel members under atmospheric corrosion attack

Atmospheric corrosion is a relevant problem for steel structures and components exposed in aggressive environment in case of poor and/or unfeasible maintenance and inspection during service life. As for thin-walled members, the corrosion hazard can be exacerbated due to the thin thickness of components and the coupled effect between corrosion and buckling can significantly reduce the structural capacity of such structures. Following these considerations, this paper presents a study on the reliability of a thin-walled steel section subjected to the damage induced by atmospheric corrosion in outdoor environments, combining predictive corrosion models for metals with structural reliability applications. A general procedure for the evaluation of the time variant capacity is proposed and discussed in detail. Finally, an application to a C-lipped cold formed section is presented and a reliability analysis of the deteriorating section is carried out to evaluate the coupled effect of corrosion and buckling, according to the proposed procedure

Experimental and Numerical Analysis of Seismic Response of Unreinforced Masonry Cross Vaults

The present paper shows an experimental and numerical analysis to understand the seismic behaviour of unreinforced masonry cross vault. The experimental tests were performed on a 1:5 scale model of a cross vault made of 3D-printed blocks with dry joints. The seismic actions was experimentally simulated as a horizontal force proportional to the vault\u2019s mass by using a quasi-static tilt testing setup. The vault 3D collapse mechanism and its strength expressed in terms of collapse multiplier was investigated, also considering the direction of the seismic action with respect to the vault\u2019s base. The tests results were compared to those obtained from a numerical analysis using a rigid-block model based on 3D limit analysis. The model formulation allows to take into account both associative and non-associative behaviour. A sensitivity analysis on friction angle variation was also investigated to evaluate the accuracy and robustness of the model

Rigid block and finite element analysis of settlement-induced failure mechanisms in historic masonry wall panels

The paper is related to the assessment of collapse mechanisms of historic masonry structures suffering settlements induced by ground movements. Two numerical strategies are adopted in order to study the influence of the settled zone on the cracking of masonry buildings: a discrete rigid block model and a continuous homogenized model. The first approach provides an estimate of the collapse load and failure pattern of masonry based on the lower bound theorem of limit analysis. The second approach is formulated in the framework of multi-surface plasticity and implemented in a FE code for the path-following non-linear analysis of masonry wall described as continuous anisotropic plate. Several settlement configurations, of masonry walls under moving ground support are investigated and the corresponding failure patterns resulting from the analysis are obtained resulting in local or global failure modes. The results of the two modeling formulations are compared and discussed in order to highlight the features of the two different approaches in the prediction of settlement-induced damage

Shake‑table testing of a stone masonry building aggregate: overview of blind prediction study

City centres of Europe are often composed of unreinforced masonry structural aggregates, whose seismic response is challenging to predict. To advance the state of the art on the seismic response of these aggregates, the Adjacent Interacting Masonry Structures (AIMS) subproject from Horizon 2020 project Seismology and Earthquake Engineering Research Infrastructure Alliance for Europe (SERA) provides shake-table test data of a two-unit, double-leaf stone masonry aggregate subjected to two horizontal components of dynamic excitation. A blind prediction was organized with participants from academia and industry to test modelling approaches and assumptions and to learn about the extent of uncertainty in modelling for such masonry aggregates. The participants were provided with the full set of material and geometrical data, construction details and original seismic input and asked to predict prior to the test the expected seismic response in terms of damage mechanisms, base-shear forces, and roof displacements. The modelling approaches used differ significantly in the level of detail and the modelling assumptions. This paper provides an overview of the adopted modelling approaches and their subsequent predictions. It further discusses the range of assumptions made when modelling masonry walls, floors and connections, and aims at discovering how the common solutions regarding modelling masonry in general, and masonry aggregates in particular, affect the results. The results are evaluated both in terms of damage mechanisms, base shear forces, displacements and interface openings in both directions, and then compared with the experimental results. The modelling approaches featuring Discrete Element Method (DEM) led to the best predictions in terms of displacements, while a submission using rigid block limit analysis led to the best prediction in terms of damage mechanisms. Large coefficients of variation of predicted displacements and general underestimation of displacements in comparison with experimental results, except for DEM models, highlight the need for further consensus building on suitable modelling assumptions for such masonry aggregates

DynABlock_2D: An optimization-based MATLAB application for rocking dynamics, nonlinear static and limit analysis of masonry block structures

DynABlock_2D is a standalone MATLAB® application for rocking dynamics, nonlinear static and limit analysis of masonry block structures under seismic actions and support movements. The software was designed in order to provide an integrated tool for the different types of analysis recommended in technical standards and commentaries on the assessment of failure mechanisms in historic masonry structures. The objective of this paper is to describe the architecture, the main functionalities and the general form of the optimization-based formulations implemented in the code for the different types of analysis. Masonry is represented as an assemblage of rigid blocks interacting at no-tension frictional contact interfaces, with elastic or rigid behavior. A simple .xls file is used for the input of mechanical parameters and loading conditions related to the analysis types. CAD .dxf files are used for the generation of geometric models. Efficient solvers available in the literature are used for the optimization problems, involving short CPU times to obtain a solution. Examples of applications to arches and arch on buttresses are presented to illustrate the capabilities and computational efficiency of the developed software