1,843 research outputs found
The influence of holes in the mechanical properties of EWT solar cells
EWT back contact solar cells are manufactured from very thin silicon wafers. These wafers are drilled by means of a laser process creating a matrix of tiny holes with a density of approximately 125 holes per square centimeter. Their influence in the stiffness and mechanical strength has been studied. To this end, both wafers with and without holes have been tested with the ring on ring test. Numerical simulations of the tests have been carried out through the Finite Element Method taking into account the non-linearities present in the tests. It's shown that one may use coarse meshes without holes to simulate the test and after that sub models are used for the estimation of the stress concentration around the holes
Enhanced time response of 1-in. LaBr3(Ce) crystals by leading edge and constant fraction techniques
We have characterized in depth the time response of three detectors equipped
with cylindrical LaBr (Ce) crystals with dimensions of 1-in. in height
and 1-in. in diameter, and having nominal Ce doping concentration of 5%, 8% and
10%. Measurements were performed at Co and Na {\gamma}-ray
energies against a fast BaF reference detector. The time resolution was
optimized by the choice of the photomultiplier bias voltage and the fine tuning
of the parameters of the constant fraction discriminator, namely the
zero-crossing and the external delay. We report here on the optimal time
resolution of the three crystals. It is observed that timing properties are
influenced by the amount of Ce doping and the crystal homogeneity. For the
crystal with 8% of Ce doping the use of the ORTEC 935 CFD at very shorts delays
in addition to the Hamamatsu R9779 PMT has made it possible to improve the
LaBr(Ce) time resolution from the best literature value at 60Co photon
energies to below 100 ps.Comment: Article submitted to Nuclear Instruments and Methods in Physics
Research Section A: Accelerators, Spectrometers, Detectors and Associated
Equipmen
Study of single particle properties of nuclei in the region of the "island of inversion" by means of neutron-transfer reactions
CP violation with a dynamical Higgs
We determine the complete set of independent gauge and gauge-Higgs CP-odd
effective operators for the generic case of a dynamical Higgs, up to four
derivatives in the chiral expansion. The relation with the linear basis of
dimension six CP-odd operators is clarified. Phenomenological applications
include bounds inferred from electric dipole moment limits, and from present
and future collider data on triple gauge coupling measurements and Higgs
signals.Comment: 41 pages, 3 figures; V2: citations added, typos corrected, version
published on JHE
Spectral-analysis-surface-waves-method in ground characterization
The prediction of train induced vibration levels in structures close to railway tracks before track construction starts is important in order to avoid having to implement costly mitigation measures afterwards. The used models require an accurate characterization of the propagation medium i.e. the soil layers. To this end the spectral analysis of surface waves (SASW) method has been chosen among the active surface waves techniques available. As dynamic source a modal sledge hammer has been used. The generated vibrations have been measured at known offsets by means of several accelerometers. There are many parameters involved in estimating the experimental dispersion curve and, later on, thickness and propagation velocities of the different layers. Tests have been carried out at the Segovia railway station. Its main building covers some of the railway tracks and vibration problems in the building should be avoided. In the paper these tests as well as the influence of several parameters on the estimated soil profile will be detailed
Dynamic factors for underpasses in high speed train lines
Los pasos inferiores son muy numerosos en las líneas de ferrocarril. Su comportamiento dinámico ha recibido mucha menos atención que el de otras estructuras como los puentes, pero su elevado número hace que su estudio sea económicamente relevante con vista a optimizar su forma, manteniendo la seguridad. El proyecto de puentes según el Eurocódigo incluye comprobaciones de estados límite de tensiones bajo carga dinámica. En el caso de pasos inferiores, las comprobaciones pueden resultar tan costosas como aquellas de puentes, pese a que su coste es mucho menor. Por tanto, se impone la búsqueda de unas reglas de cálculo simplificado que pongan en consonancia el coste de la estructura con el esfuerzo necesario para su proyecto. Este artículo propone un conjunto de reglas basadas en un estudio paramétrico.Underpasses are common in modern railway lines. Wildlife corridors and drainage conduits often fall into this category of partially buried structures. Their dynamic behavior has received far less attention than that of other structures such as bridges, but their large number makes their study an interesting challenge from the viewpoint of safety and cost savings. The bridge design rules in accordance with the Eurocode involve checks on stresses according to dynamic loading. In the case of underpasses, those checks may be as much as those for bridges. Therefore, simplified design rules may align the design effort with their cost. Such a set of rules may provide estimations of response parameters based on the key parameters influencing the result. This paper contains a proposal based on a parametric study.Peer Reviewe
- …