Radiative capture and electromagnetic dissociation involving loosely bound nuclei: the 8^8B example

Electromagnetic processes in loosely bound nuclei are investigated using an analytical model. In particular, electromagnetic dissociation of $^8$B is studied and the results of our analytical model are compared to numerical calculations based on a three-body picture of the $^8$B bound state. The calculation of energy spectra is shown to be strongly model dependent. This is demonstrated by investigating the sensitivity to the rms intercluster distance, the few-body behavior, and the effects of final state interaction. In contrast, the fraction of the energy spectrum which can be attributed to E1 transitions is found to be almost model independent at small relative energies. This finding is of great importance for astrophysical applications as it provides us with a new tool to extract the E1 component from measured energy spectra. An additional, and independent, method is also proposed as it is demonstrated how two sets of experimental data, obtained with different beam energy and/or minimum impact parameter, can be used to extract the E1 component.Comment: Submitted to Phys. Rev. C. 10 pages, 7 figure

An optimized chiral nucleon-nucleon interaction at next-to-next-to-leading order

We optimize the nucleon-nucleon interaction from chiral effective field theory at next-to-next- to-leading order. The resulting new chiral force NNLOopt yields \chi^2 \approx 1 per degree of freedom for laboratory energies below approximately 125 MeV. In the A = 3, 4 nucleon systems, the contributions of three-nucleon forces are smaller than for previous parametrizations of chiral interactions. We use NNLOopt to study properties of key nuclei and neutron matter, and demonstrate that many aspects of nuclear structure can be understood in terms of this nucleon-nucleon interaction, without explicitly invoking three-nucleon forces.Comment: 6 pages, 4 figure

The potential of building envelope greening to achieve quietness

Reduction of noise is one of the multiple benefits of building envelope greening measures. The potential of wall vegetation systems, green roofs, vegetated low screens at roof edges, and also combinations of such treatments, have been studied by means of combining 2D and 3D full-wave numerical methodologies. This study is concerned with road traffic noise propagation towards the traffic-free sides of inner-city buildings (courtyards). Preserving quietness at such locations has been shown before to be beneficial for the health and well-being of citizens. The results in this study show that green roofs have the highest potential to enhance quietness in courtyards. Favourable combinations of roof shape and green roofs have been identified. Vegetated facades are most efficient when applied to narrow city canyons with otherwise acoustically hard facade materials. Greening of the upper storey's in the street and (full) facades in the courtyard itself is most efficient to achieve noise reduction. Low-height roof screens were shown to be effective when multiple screens are placed, but only on conditions that their faces are absorbing. The combination of different greening measures results in a lower combined effect than when the separate effects would have been linearly added. The combination of green roofs or wall vegetation with roof screens seems most interesting

A Model of Sound Scattering by Atmospheric Turbulence for Use in Noise Mapping Calculations

Sound scattering due to atmospheric turbulence limits the noise reduction in shielded areas. An engineering model is presented, aimed to predict the scattered level for general noise mapping purposes including sound propagation between urban canyons. Energy based single scattering for homogeneous and isotropic turbulence following the Kolmogorov model is assumed as a starting point and a saturation based on the von Karman model is used as a first-order multiple scattering approximation. For a single shielding obstacle the scattering model is used to calculate a large dataset as function of the effective height of the shielding obstacle and its distances to source and receiver. A parameterisation of the dataset is used when calculating the influence of single or double canyons, including standardised air attenuation rates as well as facade absorption and Fresnel weighting of the multiple facade reflections. Assuming a single point source, an aver aging over three receiver positions and that each ground reflection causes energy doubling, the final engineering model is formulated as a scattered level for a shielding building without canyon plus a correction term for the effect of a single or a double canyon, assuming a flat rooftop of the shielding building. Input parameters are, in addition to geometry and sound frequency, the strengths of velocity and temperature turbulence

Urban background noise mapping: The multiple-reflection correction term

Mapping of road traffic noise in urban areas according to standardized engineering calculation methods systematically results in an underestimation of noise levels at areas shielded from direct exposure to noise, such as inner yards. In most engineering methods, road traffic lanes are represented by point sources and noise levels are computed utilizing point-to-point propagation paths. For a better prediction of noise levels in shielded urban areas, an extension of engineering methods by an attenuation term Acan has been proposed, including multiple reflections of the urban environment both in the source and in the receiver area. The present work has two main contributions for the ease of computing Acan. Firstly, it is shown by numerical calculations that Acan may be divided into independent source and receiver environment terms, As and Ar. Based on an equivalent free field analogy, the distance dependence of these terms may moreover be expressed analytically. Secondly, an analytical expression is proposed to compute As and Ar for 3D configurations from using 2D configurations only. The expression includes dependence of the street width-to-height ratio, the difference in building heights and the percentage of facade openings in the horizontal plane. For the expression to be valid, the source should be separated from the receiver environment by at least four times the street width. © S. Hirzel Verlag EAA

Obesogenic dietary intake in families with 1-year-old infants at high and low obesity risk based on parental weight status: baseline data from a longitudinal intervention (Early STOPP)

PURPOSE: To compare dietary intake in 1-year-old infants and their parents between families with high and low obesity risk, and to explore associations between infant dietary intake and relative weight. METHODS: Baseline analyses of 1-year-old infants (n = 193) and their parents participating in a longitudinal obesity intervention (Early STOPP) were carried out. Dietary intake and diet quality indicators were compared between high- and low-risk families, where obesity risk was based on parental weight status. The odds for high diet quality in relation to parental diet quality were determined. Associations between measured infant relative weight and dietary intake were examined adjusting for obesity risk, socio-demographics, and infant feeding. RESULTS: Infant dietary intake did not differ between high- and low-risk families. The parents in high-risk families consumed soft drinks, French fries, and low-fat spread more frequently, and fish and fruits less frequently (p < 0.05) compared to parents in low-risk families. Paternal intake of vegetables and fish increased the odds for children being consumers of vegetables (OR 1.7; 95 % CI 1.0-2.9) and fish, respectively (OR 2.5; 95 % CI 1.4-4.4). Infant relative weight was weakly associated with a high intake of milk cereal drink (r = 0.15; p < 0.05), but not with any other aspect of dietary intake, obesity risk, or early feeding patterns. CONCLUSIONS: At the age of one, dietary intake in infants is not associated with family obesity risk, nor with parental obesogenic food intake. Milk cereal drink consumption but no other infant dietary marker reflects relative weight at this young age.published_or_final_versio

The 14C(n,g) cross section between 10 keV and 1 MeV

The neutron capture cross section of 14C is of relevance for several nucleosynthesis scenarios such as inhomogeneous Big Bang models, neutron induced CNO cycles, and neutrino driven wind models for the r process. The 14C(n,g) reaction is also important for the validation of the Coulomb dissociation method, where the (n,g) cross section can be indirectly obtained via the time-reversed process. So far, the example of 14C is the only case with neutrons where both, direct measurement and indirect Coulomb dissociation, have been applied. Unfortunately, the interpretation is obscured by discrepancies between several experiments and theory. Therefore, we report on new direct measurements of the 14C(n,g) reaction with neutron energies ranging from 20 to 800 keV

Effective-interaction approach to the many-boson problem

We show that the convergence behavior of the many-body numerical diagonalization scheme for strongly interacting bosons in a trap can be significantly improved by the Lee-Suzuki method adapted from nuclear physics: One can construct an effective interaction that acts in a space much smaller than the original Hilbert space. In particular for short-ranged forces and strong correlations, the method offers a good estimate of the energy and the excitation spectrum, at a computational cost several orders of magnitude smaller than that required by the standard method.Comment: 5 pages, 4 figure

Accurate nuclear radii and binding energies from a chiral interaction

With the goal of developing predictive ab initio capability for light and medium-mass nuclei, two-nucleon and three-nucleon forces from chiral effective field theory are optimized simultaneously to low-energy nucleon-nucleon scattering data, as well as binding energies and radii of few-nucleon systems and selected isotopes of carbon and oxygen. Coupled-cluster calculations based on this interaction, named NNLOsat, yield accurate binding energies and radii of nuclei up to Ca-40, and are consistent with the empirical saturation point of symmetric nuclear matter. In addition, the low-lying collective J(pi) = 3(-) states in O-16 and 40Ca are described accurately, while spectra for selected p- and sd-shell nuclei are in reasonable agreement with experiment