28 research outputs found

    Stiffness and energy losses in cylindrically symmetric superconductor levitating systems

    Full text link
    Stiffness and hysteretic energy losses are calculated for a magnetically levitating system composed of a type-II superconductor and a permanent magnet when a small vibration is produced in the system. We consider a cylindrically symmetric configuration with only vertical movements and calculate the current profiles under the assumption of the critical state model. The calculations, based on magnetic energy minimization, take into account the demagnetization fields inside the superconductor and the actual shape of the applied field. The dependence of stiffness and hysteretic energy losses upon the different important parameters of the system such as the superconductor aspect ratio, the relative size of the superconductor-permanent magnet, and the critical current of the superconductor are all systematically studied. Finally, in view of the results, we provide some trends on how a system such as the one studied here could be designed in order to optimize both the stiffness and the hysteretic losses.Comment: 8 pages; 8 figure

    Critical State Flux Penetration and Linear Microwave Vortex Response in YBa_2Cu_3O_{7-x} Films

    Full text link
    The vortex contribution to the dc field (H) dependent microwave surface impedance Z_s = R_s+iX_s of YBa_2Cu_3O_{7-x} thin films was measured using suspended patterned resonators. Z_s(H) is shown to be a direct measure of the flux density B(H) enabling a very precise test of models of flux penetration. Three regimes of field-dependent behavior were observed: (1) Initial flux penetration occurs on very low field scales H_i(4.2K) 100Oe, (2) At moderate fields the flux penetration into the virgin state is in excellent agreement with calculations based upon the field-induced Bean critical state for thin film geometry, parametrized by a field scale H_s(4.2K) J_c*d 0.5T, (3) for very high fields H >>H_s, the flux density is uniform and the measurements enable direct determination of vortex parameters such as pinning force constants \alpha_p and vortex viscosity \eta. However hysteresis loops are in disagreement with the thin film Bean model, and instead are governed by the low field scale H_i, rather than by H_s. Geometric barriers are insufficient to account for the observed results.Comment: 20 pages, LaTeX type, Uses REVTeX style files, Submitted to Physical Review B, 600 dpi PostScript file with high resolution figures available at http://sagar.physics.neu.edu/preprints.htm

    Wide Field Infrared Survey Telescope (WFIRST) Observatory Overview

    Get PDF
    NASA's Wide Field Infrared Survey Telescope (WFIRST) is being designed to deliver unprecedented capability in dark energy and exoplanet science, and to host a technology demonstration coronagraph for exoplanet imaging and spectroscopy. The observatory design has matured since 2013; we present a comprehensive description of the observatory configuration as refined during the WFIRST Phase-A study. The observatory is based on an existing, repurposed 2.4 meter space telescope coupled with a 288 megapixel near-infrared (0.6 to 2 microns) HgCdTe focal plane array with multiple imaging and spectrographic modes. Together they deliver a 0.28 square degree field of view, which is approximately 100 times larger than the Hubble Space Telescope, and a sensitivity that enables rapid science surveys. In addition, the coronagraph technology demonstration will prove the feasibility of new techniques for exoplanet discovery, imaging, and spectral analysis. A composite truss structure meters both instruments to the telescope assembly, and the instruments and the spacecraft are flight serviceable. We present configuration changes since 2013 that improved interfaces, improved testability, and reduced technical risk. We provide an overview of our Integrated Modeling results, performed at an unprecedented level for a phase-A study, to illustrate performance margins with respect to static wavefront error, jitter, and thermal drift

    The Flux-Line Lattice in Superconductors

    Full text link
    Magnetic flux can penetrate a type-II superconductor in form of Abrikosov vortices. These tend to arrange in a triangular flux-line lattice (FLL) which is more or less perturbed by material inhomogeneities that pin the flux lines, and in high-TcT_c supercon- ductors (HTSC's) also by thermal fluctuations. Many properties of the FLL are well described by the phenomenological Ginzburg-Landau theory or by the electromagnetic London theory, which treats the vortex core as a singularity. In Nb alloys and HTSC's the FLL is very soft mainly because of the large magnetic penetration depth: The shear modulus of the FLL is thus small and the tilt modulus is dispersive and becomes very small for short distortion wavelength. This softness of the FLL is enhanced further by the pronounced anisotropy and layered structure of HTSC's, which strongly increases the penetration depth for currents along the c-axis of these uniaxial crystals and may even cause a decoupling of two-dimensional vortex lattices in the Cu-O layers. Thermal fluctuations and softening may melt the FLL and cause thermally activated depinning of the flux lines or of the 2D pancake vortices in the layers. Various phase transitions are predicted for the FLL in layered HTSC's. The linear and nonlinear magnetic response of HTSC's gives rise to interesting effects which strongly depend on the geometry of the experiment.Comment: Review paper for Rep.Prog.Phys., 124 narrow pages. The 30 figures do not exist as postscript file

    Enhancement of the Critical Current Density of YBA2CU3O7–δ–Films by Substrate Irradiation

    No full text

    Untersuchung der magnetischen Bereichsaufteilung und der Phasenumwandlung amorpher Eisen-Zirkon-Legierungen

    No full text
    TIB Hannover: DR 6273 / FIZ - Fachinformationszzentrum Karlsruhe / TIB - Technische InformationsbibliothekSIGLEDEGerman

    Anisotropic defect structure and transport properties of YBa2Cu3O7−δ\mathrm{YBa_2Cu_3O_{7−\delta}} films on vicinal SrTiO3(001)\mathrm{SrTiO_3(001)}

    No full text
    The microstructure of YBa2Cu3O7−δYBa2Cu3O7−δ thin films grown on vicinal SrTiO3(001)SrTiO3(001) has been studied as a function of the vicinal angle by x-ray diffraction using the two-dimensional q-scan technique. Our results reveal a strong correlation between the miscut of a SrTiO3(001)SrTiO3(001) substrate and the anisotropic defect structure of the film. Furthermore, we observed an anisotropy of the corresponding critical current density up to 4.6 depending on the angle of miscut
    corecore