Design and mathematical analysis of a three-mirror X-ray telescope based on ATM S-056 X-ray telescope hardware

The mathematical design of the aspheric third mirror for the three-mirror X-ray telescope (TMXRT) is presented, along with the imaging characteristics of the telescope obtained by a ray trace analysis. The present design effort has been directed entirely toward obtaining an aspheric third mirror which will be compatible with existing S-056 paraboloidal-hyperboloidal mirrors. This compatability will facilitate the construction of a prototype model of the TMXRT, since it will only be necessary to fabricate one new mirror in order to obtain a working model

Vignetting characteristics of the S-056 X-ray telescope

A ray trace analysis of the vignetting characteristics of the S-056 X ray telescope is presented. The relative energy is calculated in the spot formed in the focal plane of the S-056 X ray telescope by an off axis point source at infinity for off axis angles of 0, 1, 2, ..., 35 arc minutes. At each off axis angle, the relative energies are evaluated using theoretical X ray reflectivity curves for wavelengths of 8.34 A, 17.57 A, and 27.39 A, and also using an experimental X ray reflectivity curve for 8.34 A. The effects of vignetting due purely to the geometry of the S-056 optical system are evaluated separately, as well as jointly with the effects of mirror reflectivity

Ray-trace analysis of glancing-incidence X-ray optical systems

The results of a ray-trace analysis of several glancing-incidence X-ray optical systems are presented. The object of the study was threefold. First, the vignetting characteristics of the S-056 X-ray telescope were calculated using experimental data to determine mirror reflectivities. Second, a small Wolter Type I X-ray telescope intended for possible use in the Geostationary Operational Environmental Satellite program was designed and ray traced. Finally, a ray-trace program was developed for a Wolter-Schwarzschild X-ray telescope

MSFC holographic correlation techniques facility study

The basic theory of the holographic correlation system is illustrated. The effect of translating the object distribution in the object plane when the hologram is illuminated is investigated. The effect of translating the object along the optical axis is discussed and preliminary results presented

Multilayer Thin Film Thermoelectrics Produced by Sputtering

In this work we explore the possibility of achieving bulk electrical properties in single layer sputter deposited films grown epitaxially on (111) oriented BaF{sub 2} substrates. There are a number of sputter deposition parameters that can be varied in order to optimize the film quality. It is important to understand the effect of varying the deposition temperature, Ar sputtering gas pressure, and the substrate bias. We will consider only Bi and Bi{sub 0.86}Sb{sub 0.14} films in this paper. These materials were chosen since they have the same simple structure, two different band gaps and do not change significantly either in physical or electrical properties with small amounts of cross contamination. We will also present our work on multilayer thermoelectrics made of Bi and Bi{sub 0.86}Sb{sub 0.14} layers. There has been considerable interest in this multilayer structure in the literature. Theoretical calculations of the band structure and interface states of these multilayer structures have been made by Mustafaev and Agassi et al. respectively [6,7]. Experimentally Yoshida et al. have examined similar multilayer structures grown by MBE as well as Bi/Sb multilayer samples in which report an anomalous thermoelectric power [8]

Multilayer Thermoelectric Films: A Strategy for the Enhancement of Zt

The relative efficiency of a thermoelectric material is measured in terms of a dimensionless figure of merit, ZT. Although all known thermoelectric materials are believed to have ZT {le} 1, recent theoretical results predict that thermoelectric devices fabricated as two-dimensional quantum wells (2D QWs) could have ZT {ge} 3. Multilayers with the dimensions of 2D QWs have been synthesized by alternately sputtering Bi{sub 0.9}Sb{sub 0.1} and PbTe{sub 0.8}Se{sub 0.2} onto a moving substrate from a pair of magnetron sources. These materials have been synthesized to test the thermoelectric quantum-well concept and gain insight into relevant transport mechanisms. This work focuses primarily on the scientific issues involved in producing the materials necessary to examine the possibility of enhancing ZT using quantum confinement. The techniques needed to measure the relevant electrical parameters of thermoelectric thin films are developed in this paper. Ultimately, if a quantum well enhancement of thermoelectrics is experimentally observed, devices based on this technology could be used to greatly expand the role of thermoelectrics in power generation and refrigeration

Non-emphysematous chronic obstructive pulmonary disease is associated with diabetes mellitus

Abstract Background Chronic obstructive pulmonary disease (COPD) has been classically divided into blue bloaters and pink puffers. The utility of these clinical subtypes is unclear. However, the broader distinction between airway-predominant and emphysema-predominant COPD may be clinically relevant. The objective was to define clinical features of emphysema-predominant and non-emphysematous COPD patients. Methods Current and former smokers from the Genetic Epidemiology of COPD Study (COPDGene) had chest computed tomography (CT) scans with quantitative image analysis. Emphysema-predominant COPD was defined by low attenuation area at -950 Hounsfield Units (LAA-950) ≥10%. Non-emphysematous COPD was defined by airflow obstruction with minimal to no emphysema (LAA-950 < 5%). Results Out of 4197 COPD subjects, 1687 were classified as emphysema-predominant and 1817 as non-emphysematous; 693 had LAA-950 between 5–10% and were not categorized. Subjects with emphysema-predominant COPD were older (65.6 vs 60.6 years, p < 0.0001) with more severe COPD based on airflow obstruction (FEV1 44.5 vs 68.4%, p < 0.0001), greater exercise limitation (6-minute walk distance 1138 vs 1331 ft, p < 0.0001) and reduced quality of life (St. George’s Respiratory Questionnaire score 43 vs 31, p < 0.0001). Self-reported diabetes was more frequent in non-emphysematous COPD (OR 2.13, p < 0.001), which was also confirmed using a strict definition of diabetes based on medication use. The association between diabetes and non-emphysematous COPD was replicated in the ECLIPSE study. Conclusions Non-emphysematous COPD, defined by airflow obstruction with a paucity of emphysema on chest CT scan, is associated with an increased risk of diabetes. COPD patients without emphysema may warrant closer monitoring for diabetes, hypertension, and hyperlipidemia and vice versa. Trial registration Clinicaltrials.gov identifiers: COPDGene NCT00608764 , ECLIPSE NCT00292552 .http://deepblue.lib.umich.edu/bitstream/2027.42/109496/1/12890_2014_Article_599.pd

How can chiropractic become a respected mainstream profession? The example of podiatry

<p>Abstract</p> <p>Background</p> <p>The chiropractic profession has succeeded to remain in existence for over 110 years despite the fact that many other professions which had their start at around the same time as chiropractic have disappeared. Despite chiropractic's longevity, the profession has not succeeded in establishing cultural authority and respect within mainstream society, and its market share is dwindling. In the meantime, the podiatric medical profession, during approximately the same time period, has been far more successful in developing itself into a respected profession that is well integrated into mainstream health care and society.</p> <p>Objective</p> <p>To present a perspective on the current state of the chiropractic profession and to make recommendations as to how the profession can look to the podiatric medical profession as a model for how a non-allopathic healthcare profession can establish mainstream integration and cultural authority.</p> <p>Discussion</p> <p>There are several key areas in which the podiatric medical profession has succeeded and in which the chiropractic profession has not. The authors contend that it is in these key areas that changes must be made in order for our profession to overcome its shrinking market share and its present low status amongst healthcare professions. These areas include public health, education, identity and professionalism.</p> <p>Conclusion</p> <p>The chiropractic profession has great promise in terms of its potential contribution to society and the potential for its members to realize the benefits that come from being involved in a mainstream, respected and highly utilized professional group. However, there are several changes that must be made within the profession if it is going to fulfill this promise. Several lessons can be learned from the podiatric medical profession in this effort.</p

Molecular Mechanisms of Fiber Differential Development between G. barbadense and G. hirsutum Revealed by Genetical Genomics

Cotton fiber qualities including length, strength and fineness are known to be controlled by genes affecting cell elongation and secondary cell wall (SCW) biosynthesis, but the molecular mechanisms that govern development of fiber traits are largely unknown. Here, we evaluated an interspecific backcrossed population from G. barbadense cv. Hai7124 and G. hirsutum acc. TM-1 for fiber characteristics in four-year environments under field conditions, and detected 12 quantitative trait loci (QTL) and QTL-by-environment interactions by multi-QTL joint analysis. Further analysis of fiber growth and gene expression between TM-1 and Hai7124 showed greater differences at 10 and 25 days post-anthesis (DPA). In this two period important for fiber performances, we integrated genome-wide expression profiling with linkage analysis using the same genetic materials and identified in total 916 expression QTL (eQTL) significantly (P<0.05) affecting the expression of 394 differential genes. Many positional cis-/trans-acting eQTL and eQTL hotspots were detected across the genome. By comparative mapping of eQTL and fiber QTL, a dataset of candidate genes affecting fiber qualities was generated. Real-time quantitative RT-PCR (qRT-PCR) analysis confirmed the major differential genes regulating fiber cell elongation or SCW synthesis. These data collectively support molecular mechanism for G. hirsutum and G. barbadense through differential gene regulation causing difference of fiber qualities. The down-regulated expression of abscisic acid (ABA) and ethylene signaling pathway genes and high-level and long-term expression of positive regulators including auxin and cell wall enzyme genes for fiber cell elongation at the fiber developmental transition stage may account for superior fiber qualities