3,823 research outputs found
Grid fault ride-through of an LCC-VSC tandem converter, used as a grid interface for a multi-MW wind turbine
A tandem converter, consisting of a line-commutated converter in parallel with a voltage source active filter, is proposed as a grid interface for a 10 and 20MW superconducting wind turbine generator. A commutation assistance scheme is introduced which allows the active filter to regulate the commutation of the LCC thyristors. This can allow ride through of grid faults by enabling the LCC thyristors to continue commutating with reduced grid voltage, which enables the use of tandem converters as a grid interface for renewable energy sources. The commutation assistance scheme is verified using simulation
Regulating DC link voltage fluctuations on a grid connected wave power system using energy storage
The fluctuating nature of power generated from waves combined with the weak nature of the network, makes the connection of arrays of wave energy converters (WECs) to the network a challenge. This paper investigates the research questions raised by the proposed development of a wave farm using coastal WECs, where the spatial layout of the WECs is restricted and cannot be used to damp the fluctuations in generated power. The concept of using energy storage on a common DC link to compensate for the fluctuations in real power, and ensure that the power quality on a weak, rural distribution network is not compromised, will also be discussed
Using Adobe Flash Lite on mobile phones for psychological research: reaction time measurement reliability and inter-device variability
Mobile telephones have significant potential for use in psychological research, possessing unique characteristics—not least their ubiquity—that may make them useful tools for psychologists. We examined whether it is possible to measure reaction times (RTs) accurately using Adobe Flash Lite on mobile phones. We ran simple and choice RT experiments on two widely available mobile phones, a Nokia 6110 Navigator and a Sony Ericsson W810i, using a wireless application protocol (WAP) connection to access the Internet from the devices. RTs were compared within subjects with those obtained using a Linux-based millisecond-accurate measurement system. Results show that measured RTs were significantly longer on mobile devices, and that overall RTs and distribution of RTs varied across device
Enhanced control strategy of full-bridge modular multilevel converter
This paper describes a control approach that allows the cell capacitor voltages of the full-bridge modular multilevel converter (FB-MMC) to be controlled independent of the input dc link voltage. Moreover, this control approach offers the possibility of operating FB-MMC from bi-polar dc link voltages; thus, creating new possibilities for building generic hybrid dc grids with reversible dc link voltage, where the conventional line commutated current source converters can operate alongside voltage source converters. Furthermore, the presented control approach improves the dc fault ride-through of the FB-MMC compared to existing approaches. This could be achieved by an active control of the arm currents and cell capacitor voltages, and full exploitation of the FB-MMC redundant switch states. Operation of the FB-MMC with reversible DC link voltage and decoupled control of the cell capacitor voltages from the dc link voltage are demonstrated using simulations. The major findings and implications of this work are highlighted
Active power sharing in input-series-input-parallel output-series connected DC/DC converters
A high-capacity DC/DC converter with novel input-series-input-parallel output-series connection and with autonomous power sharing between modules is proposed. The proposed scheme is well suited for large-scale wind farm DC collection networks, as it avoids the charging current issues associated with its AC counterpart, and offers lower losses and reduced size and weight when a medium- or high-frequency transformer is used. Small-signal analysis is used to derive the control structures for the converter input and output stages. The proposed control scheme is validated through simulation and experimentation, including demonstration of autonomous power sharing between modules under several operating conditions
Modular input-series-input-parallel output-series DC/DC converter control with fault detection and redundancy
A novel high-power modular input-series-input-parallel output-series connected DC/DC converter for medium-voltage application is proposed. Emphasis has been placed on power sharing control to compensate parameter mismatches and achieve equal power distribution between modules. Converter control is extended to achieve fault-tolerant operation by exploiting modularity to provide redundancy in the event of any failure. The proposed control scheme is validated through application-level simulations and scaled-down experiments to testify the reliability of the proposed control for ensuring power sharing between modules under a range of operating conditions. The results validate the proposed converter and associated control scheme indicating this to be a promising topology for high-power medium-voltage applications
SBML models and MathSBML
MathSBML is an open-source, freely-downloadable Mathematica package that facilitates working with Systems Biology Markup Language (SBML) models. SBML is a toolneutral,computer-readable format for representing models of biochemical reaction networks, applicable to metabolic networks, cell-signaling pathways, genomic regulatory networks, and other modeling problems in systems biology that is widely supported by the systems biology community. SBML is based on XML, a standard medium for representing and transporting data that is widely supported on the internet as well as in computational biology and bioinformatics. Because SBML is tool-independent, it enables model transportability, reuse, publication and survival. In addition to MathSBML, a number of other tools that support SBML model examination and manipulation are provided on the sbml.org website, including libSBML, a C/C++ library for reading SBML models; an SBML Toolbox for MatLab; file conversion programs; an SBML model validator and visualizer; and SBML specifications and schemas. MathSBML enables SBML file import to and export from Mathematica as well as providing an API for model manipulation and simulation
Multidisciplinary interventions for multisite osteoarthritis in primary care: a systematic review
The Sensitivity of Auditory-Motor Representations to Subtle Changes in Auditory Feedback While Singing
Singing requires accurate control of the fundamental frequency (F0) of the voice. This study examined trained singers’ and untrained singers’ (nonsingers’) sensitivity to subtle manipulations in auditory feedback and the subsequent effect on the mapping between F0 feedback and vocal control. Participants produced the consonant-vowel /ta/ while receiving auditory feedback that was shifted up and down in frequency. Results showed that singers and nonsingers compensated to a similar degree when presented with frequency-altered feedback (FAF); however, singers’ F0 values were consistently closer to the intended pitch target. Moreover, singers initiated their compensatory responses when auditory feedback was shifted up or down 6 cents or more, compared to nonsingers who began compensating when feedback was shifted up 26 cents and down 22 cents. Additionally, examination of the first 50 ms of vocalization indicated that participants commenced subsequent vocal utterances, during FAF, near the F0 value on previous shift trials. Interestingly, nonsingers commenced F0 productions below the pitch target and increased their F0 until they matched the note. Thus, singers and nonsingers rely on an internal model to regulate voice F0, but singers’ models appear to be more sensitive in response to subtle discrepancies in auditory feedback
A PC parallel port button box provides millisecond response time accuracy under Linux
For psychologists, it is sometimes necessary to measure people's reaction times to the nearest millisecond. This article describes how to use the PC parallel port to receive signals from a button box to achieve millisecond response time accuracy. The workings of the parallel port, the corresponding port addresses, and a simple Linux program for controlling the port are described. A test of the speed and reliability of button box signal detection is reported. If the reader is moderately familiar with Linux, this article should provide sufficient instruction for him or her to build and test his or her own parallel port button box. This article also describes how the parallel port could be used to control an external apparatus
- …