Unraveling the ferroelectric switching mechanisms in ferroelectric pure and La doped HfO(2 )epitaxial thin films

Epitaxial orthorhombic phase La doped HfO2 films are promising for achieving robust ferroelectric polarization without wake-up effect. However, lowering the coercive field is crucial for achieving low-power memory devices. In this work, we have investigated the influence of the La content effect on the structural and ferroelectric properties of epitaxial HfO2 thin films. We show that while the remanent polarization is optimum for 2-5 at. % La-doped HfO2 films, the coercive field is decreased with La doping. The experimental work is supported by density functional theory (DFT) calculations which show that the polarization switching in epitaxial La:HfO2 films can be understood based on the synergetic contribution of the presence of a non-ferroelectric monoclinic phase and the La doping itself that causes a reduction of the nucleation and DW motion energy barriers for the crossing path, which makes it more probable than the non-crossing one.Financial support from the Spanish Ministry of Science and Innova- tion (MCIN/AEI/10.13039/501100011033) , through the Severo Ochoa FUNFUTURE (CEX2019-000917-S) , PID2020-112548RB-I00 and PID2019-107727RB-I00 projects, and from Generalitat de Catalunya (2021 SGR 00804) is acknowledged. We also acknowledge project TED2021-130453B-C21, funded by MCIN/AEI/10.13039/501100011033 and European Union NextGeneration EU/PRTR. This work was supported by: (i) the Portuguese Foundation for Science and Technology (FCT) in the framework of the Strategic Funding Contract UIDB/04650/2020; (ii) exploratory project 2022.01740.PDTC and (iii) the European Unions Horizon 2020 research and innovation pro- gramme under grant agreement No 958174 (M-ERA-NET3/0003/2021-NanOx4EStor) . J. P. B. S. also thanks FCT for the contract under the Institutional Call to Scientific Employment Stimulus - 2021 Call (CEE- CINST/00018/2021) . A.S. also acknowledges FCT for the PhD grant with reference 2022.13796.BD

Strong reinforcement effects in 2D cellulose nanofibril-graphene oxide (CNF-GO) nanocomposites due to GO-induced CNF ordering

Nanocomposites from native cellulose with low 2D nanoplatelet content are of interest as sustainable materials combining functional and structural performance. Cellulose nanofibril-graphene oxide (CNF-GO) nanocomposite films are prepared by a physical mixing-drying method, with a focus on low GO content, the use of very large GO platelets (2-45 μm) and nanostructural characterization using synchrotron X-ray source for WAXS and SAXS. These nanocomposites can be used as transparent coatings, strong films or membranes, as gas barriers or in laminated form. CNF nanofibrils with random in-plane orientation, form a continuous non-porous matrix with GO platelets oriented in-plane. GO reinforcement mechanisms in CNF are investigated, and relationships between nanostructure and suspension rheology, mechanical properties, optical transmittance and oxygen barrier properties are investigated as a function of GO content. A much higher modulus reinforcement efficiency is observed than in previous polymer-GO studies. The absolute values for modulus and ultimate strength are as high as 17 GPa and 250 MPa at a GO content as small as 0.07 vol%. The remarkable reinforcement efficiency is due to improved organization of the CNF matrix; and this GO-induced mechanism is of general interest for nanostructural tailoring of CNF-2D nanoplatelet composites

3D printing of drug-loaded gyroid lattices using selective laser sintering

Three-dimensional printing (3DP) is gaining momentum in the field of pharmaceuticals, offering innovative opportunities for medicine manufacture. Selective laser sintering (SLS) is a novel, high resolution and single-step printing technology that we have recently introduced to the pharmaceutical sciences. The aim of this work was to use SLS 3DP to fabricate printlets (3D printed tablets) with cylindrical, gyroid lattice and bi-layer structures having customisable release characteristics. Paracetamol-loaded constructs from four different pharmaceutical grade polymers including polyethylene oxide, Eudragit (L100-55 and RL) and ethyl cellulose, were created using SLS 3DP. The novel gyroid lattice structure was able to modulate the drug release from all four polymers. This work is the first to demonstrate the feasibility of using SLS to achieve customised drug release properties of several polymers, in a swift, cost-effective manner, avoiding the need to alter the formulation composition. By creating these constructs, it is therefore possible to modify drug release, which in practice, could enable the tailoring of drug performance to the patient simply by changing the 3D design

High-temperature magnetodielectric Bi(Fe0.5Mn0.5)O3 thin films with checkerboard-ordered oxygen vacancies and low magnetic damping

The possibility of affecting the magnetic properties of a material by dielectric means, and vice versa, remains an attractive perspective for modern electronics and spintronics. Here, we report on epitaxial Bi(Fe0.5Mn0.5)O3 thin films with exceptionally low Gilbert damping and magnetoelectric coupling above room temperature (<400 K). The ferromagnetic order, not observed in bulk, has been detected with a total magnetization of 0.44 μB/formula units with low Gilbert damping parameter (0.0034), both at room temperature. Additionally, a previously overlooked check-board ordering of oxygen vacancies is observed, providing insights on the magnetic and dielectric origin of the multifunctional properties of the films. Finally, intrinsic magnetodielectric behavior is observed as revealed by the variation of dielectric permittivity well above room temperature. These findings show the possibility of electric-field-controlled magnetic properties, in low Gilbert-damping-based spintronic devices, using single-phase multiferroic material

Electric control of magnetism at the Fe/BaTiO3 interface

Interfacial magnetoelectric coupling is a viable path to achieve electrical writing of magnetic information in spintronic devices. For the prototypical Fe/BaTiO3 system, only tiny changes of the interfacial Fe magnetic moment upon reversal of the BaTiO3 dielectric polarization have been predicted so far. Here, by using X-ray magnetic circular dichroism in combination with high-resolution electron microscopy and first principles calculations, we report on an undisclosed physical mechanism for interfacial magnetoelectric coupling in the Fe/BaTiO3 system. At this interface, an ultrathin oxidized iron layer exists, whose magnetization can be electrically and reversibly switched on and off at room temperature by reversing the BaTiO3 polarization. The suppression/recovery of interfacial ferromagnetism results from the asymmetric effect that ionic displacements in BaTiO3 produces on the exchange coupling constants in the interfacial-oxidized Fe layer. The observed giant magnetoelectric response holds potential for optimizing interfacial magnetoelectric coupling in view of efficient, low-power spintronic devices

Frequency and genome load of Epstein-Barr virus in 509 breast cancers from different geographical areas

Since the few data exploring a possible association between Epstein–Barr virus (EBV) and breast cancer are conflicting, we investigated this association together with the influences of geographical areas. 509 breast cancers were sampled from areas with varying risks of nasopharynx carcinoma (NPC) such as North Africa (Algeria and Tunisia, high-risk area); southern France (Marseille, intermediate-risk area); and northern Europe (northern France, the Netherlands and Denmark; low-risk areas). Polymerase chain reaction (PCR) of a subregion of EBV BamHIC encoding the EBERs demonstrated that 31.8% of the tumours contained the viral genome. No significant differences were observed among the geographical areas. However, positive samples showed higher loads of the EBV genome in the NPC high- and intermediate-risk areas than in the low-risk areas. EBV type 1 was the dominant strain. In situ hybridization studies using a35S-labelled riboprobe for EBER1 and a laser capture microdissection, combined with quantitative PCR, showed that EBV localization was restricted to some tumour epithelial cell clusters. EBV could not be detected in the stroma. Considering the whole population covered, the presence of the EBV genome was not correlated with age, menopausal status, tumour, size, nodal status or histological grade. © 2001 Cancer Research Campaign http://www. bjcancer.co

3D Printed Pellets (Miniprintlets): A Novel, Multi-Drug, Controlled Release Platform Technology.

Selective laser sintering (SLS) is a single-step three-dimensional printing (3DP) process that can be leveraged to engineer a wide array of drug delivery systems. The aim of this work was to utilise SLS 3DP, for the first time, to produce small oral dosage forms with modified release properties. As such, paracetamol-loaded 3D printed multiparticulates, termed miniprintlets, were fabricated in 1 mm and 2 mm diameters. Despite their large surface area compared with a conventional monolithic tablet, the ethyl cellulose-based miniprintlets exhibited prolonged drug release patterns. The possibility of producing miniprintlets combining two drugs, namely paracetamol and ibuprofen, was also investigated. By varying the polymer, the dual miniprintlets were programmed to achieve customised drug release patterns, whereby one drug was released immediately from a Kollicoat Instant Release matrix, whilst the effect of the second drug was sustained over an extended time span using ethyl cellulose. Herein, this work has highlighted the versatility of SLS 3DP to fabricate small and intricate formulations containing multiple active pharmaceutical ingredients with distinct release properties