Copper, nickel and zinc removal by peanut hulls: batch and column studies in mono, tri-component systems and with real effluent

The main goal of this research study was the removal of Cu(II), Ni(II) and Zn(II) from aqueous solutions using peanut hulls. This work was mainly focused on the following aspects: chemical characterization of the biosorbent, kinetic studies, study of the pH influence in mono-component systems, equilibrium isotherms and column studies, both in mono and tri-component systems, and with a real industrial effluent from the electroplating industry. The chemical characterization of peanut hulls showed a high cellulose (44.8%) and lignin (36.1%) content, which favours biosorption of metal cations. The kinetic studies performed indicate that most of the sorption occurs in the first 30 min for all systems. In general, a pseudo-second order kinetics was followed, both in mono and tri-component systems. The equilibrium isotherms were better described by Freundlich model in all systems. Peanut hulls showed higher affinity for copper than for nickel and zinc when they are both present. The pH value between 5 and 6 was the most favourable for all systems. The sorbent capacity in column was 0.028 and 0.025 mmol g-1 for copper, respectively in mono and tri-component systems. A decrease of capacity for copper (50%) was observed when dealing with the real effluent. The Yoon-Nelson, Thomas and Yan’s models were fitted to the experimental data, being the latter the best fit

Natural organic matter fractionation along the treatment of water for human consumption

The main objective of this study was to characterize the organic matter present in raw water and along the treatment process, as well as its seasonal variation. A natural organic matter fractionation approach has been applied to Lever water treatment plant located in Douro River, in Oporto (Portugal). The process used was based on the sorption of dissolved organic matter in different types of ion exchange resins, DAX-8, DAX-4 and IRA-958, allowing its separation into four fractions: very hydrophobic acids (VHA), slightly hydrophobic acids (SHA), charged hydrophilic (CHA) and hydrophilic neutral (NEU). The dissolved organic carbon (DOC) determination was used to quantify dissolved organic matter. Samples were collected monthly, during approximately one year, from raw water captured at the surface and under the bed of the river, and after each step of the treatment: pre-filtration in sand/anthracite filters, ozonation, coagulation/flocculation, counter current dissolved air flotation and filtration (CoCoDAFF) and chlorination. The NEU fraction showed a seasonal variation, with maximum values in autumn for the sampling points corresponding to raw water captured at the surface and under the bed of the river. It was usually the predominating fraction and did not show a significant decrease throughout the treatment. Nevertheless their low concentration, the same occurred for the CHA and VHA fractions. There was an overall decrease in the SHA fraction throughout the water treatment (especially after CoCoDAFF and ozonation) as well as in the DOC. The TSUVA254 values obtained for raw water generally varied between 2.0 and 4.0 L mgC-1 m-1 and between 0.75 and 1.78 L mgC-1 m-1 for treated water. It was observed a decrease of TSUVA values along the treatment, especially after ozonation. These results may contribute to a further optimization in the process of treating water for human consumption

Fluoxetine Removal from Aqueous Solutions Using a Lignocellulosic Substrate Colonized by the White-Rot Fungus Pleurotus ostreatus

One of the main challenges in both the design of new wastewater treatment plants and the expansion and improvement of existing ones is the removal of emerging pollutants. Therefore, the search for economic and sustainable treatments is needed to enhance the removal of pharmaceuticals. The potential of a lignocellulosic substrate colonized by Pleurotus ostreatus, a waste from mushroom production, to remove fluoxetine from aqueous solutions was studied. Batch assays were performed to remove 600 µg∙L−1 fluoxetine from aqueous solutions using the colonized mushroom substrate (CMS) and crude enzyme extracts. The removal efficiencies achieved were, respectively, ≥83.1% and 19.6% in 10 min. Batch assays with sterilized CMS and 1-aminobenzotriazole (to inhibit cytochrome P450 enzymes) showed that the higher removal efficiencies achieved in the CMS assays may be attributed to the synergistic contribution of biosorption onto the CMS and lignin modifying enzymes activity, namely laccase activity. A column assay was performed with the CMS, fed with 750 µg∙L−1 fluoxetine aqueous solution. The removal efficiency was 100% during 30 min, decreasing to a final value of 70% after 8 h of operation. The results suggested that CMS can be a promising eco-friendly alternative to remove fluoxetine from aqueous solutions

Facile one-pot synthesis of Pt nanoparticles/SBA-15: an active and stable material for catalytic applications

Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG geförderten) Allianz- bzw. Nationallizenz frei zugänglich.This publication is with permission of the rights owner freely accessible due to an Alliance licence and a national licence (funded by the DFG, German Research Foundation) respectively.Pt/SBA-15 with an enhanced surface area but unchanged pore diameter (compared to pure SBA-15) and a Pt average particle size of ∼9 nm shows a high and stable activity for both gas-phase CO oxidation and liquid-phase cyclooctadiene hydrogenation. No intrinsic change in the structure of the catalyst occurs after several reaction cycles, suggesting that the Pt/SBA-15 presented here is an active and stable catalyst.DFG, EXC 314, Unifying Concepts in Catalysi

Ecotoxicological evaluation of chemical indicator substances present as micropollutants in laboratory wastewaters

Laboratories produce a large volume of wastewaters containing different chemical indicators, organic species for which there is no complete knowledge about their effects in the aquatic environment. The aim of this work was to evaluate the ecotoxicity of four chemical indicator substances commonly used in titrations (sodium diphenylamine-4-sulfonate, phenolphthalein, methyl orange, and eriochrome black T) by applying two distinct bioassays that evaluated the growth inhibition of the microalga Chlorella vulgaris and the acute immobilization of the microcrustacean Daphnia magna. All the indicators showed growth inhibition rates in the chronic test performed with the alga C. vulgaris. Only phenolphthalein and eriochrome black-T showed high immobilization rates on the acute test for D. magna. C. vulgaris showed higher sensitivity to the chemical indicators tested than D. magna. Eriochrome black T was the most toxic for both test organisms and, according to the effective concentration that causes inhibition on 50% of C. vulgaris population, it can be considered as “highly toxic to aquatic organisms”. Phenolphthalein and methyl orange may be classified as “toxic to aquatic organisms” and sodium diphenylamine-4-sulfonate is the least toxic, only being considered as “harmful”. This work increases the awareness of the hazardous effects of these chemical indicators and reinforces the need of improved solutions to manage and treat laboratory effluents.info:eu-repo/semantics/publishedVersio

4,4′-Di-tert-butyl-2,2′-bipyridine

In the title compound, C18H24N2, the mol­ecular unit adopts a trans conformation around the central C—C bond [N—C—C—N torsion angle of 179.2 (3)°], with the two aromatic rings almost coplanar [dihedral angle of only 0.70 (4)°]. The crystal packing is driven by co-operative contacts involving weak C—H⋯N and C—H⋯π inter­actions, and also the need to fill effectively the available space

Conductive polysaccharides-based proton-exchange membranes for fuel cell applications: the case of bacterial cellulose and fucoidan

Conductive natural-based separators for application in polymer electrolyte fuel cells (PEFCs) were fabricated by combining a bacterial polysaccharide, i.e. bacterial cellulose (BC), and an algae sulphated polysaccharide, i.e. fucoidan (Fuc). The diffusion of fucoidan aqueous solution containing a natural-based cross-linker, viz. tannic acid, into the wet BC nanofibrous three-dimensional network, followed by thermal cross-linking, originated fully bio-based proton exchange membranes (PEMs). The PEMs present thermal-oxidative stability in the range of 180-200 °C and good dynamic mechanical performance (storage modulus ≥ 460 MPa). Additionally, the BC/Fuc membranes exhibit protonic conductivity that increases with increasing relative humidity (RH), which is a typical feature for numerous water-mediated proton conductors. The traditional Arrhenius-type plots demonstrate a linear behaviour with a maximum protonic conductivity of 1.6 mS cm-1 at 94 °C and 98 % RH. The results showed that these fully bio-based conductive membranes have potential as eco-friendly alternatives to other PEMs for application in PEFCs.publishe

Tripyridinium cis-tetra­chlorido­dioxido­molybdate(VI) chloride

In the title compound, (C5H6N)3[MoCl4O2]Cl, the pyridinium cations are N—H⋯Cl hydrogen bonded to the anionic [MoCl4O2]2− complexes and to the two crystallographically independent chloride anions (located on C2 axes). The Mo6+ centre adopts a highly distorted octa­hedral geometry, being surrounded by four chloride and two terminal oxide groups. The oxide ligands are mutually cis