619 research outputs found
Development of in-cylinder injection for a hydrogen-fueled internal combustion engine
Traditional means for converting an engine to operate on hydrogen fuel incorporates port injection. The typical method for controlling emissions on a port injection engine is to operate the engine lean (typical AFR of 70:1) and/or incorporate an EGR system. The result of utilizing these methods is an appreciable reduction in power output. In-cylinder injection of an internal combustion engine provides a reliable method for delivering hydrogen fuel whereby fuel efficiency, power output and emissions levels are improved. Injection of hydrogen directly into the combustion chamber allows control of various factors such as burn rate and combustion timing which influence the production of emissions in the form of NOx. Testing of the converted engines has also shown an increase in power due to an increase in volumetric efficiency and a reduction of emissions at near stoichiometric operation. Details for converting an engine to an in-cylinder hydrogen injection, computer systems control, emissions testing and performance evaluation are given
Actinides, accelerators and erosion
Fallout isotopes can be used as artificial tracers of soil erosion and sediment accumulation. The most commonly used isotope to date has been 137Cs. Concentrations of 137Cs are, however, significantly lower in the Southern Hemisphere, and furthermore hav
Robust radiocarbon dating of wood samples by high-sensitivity liquid scintillation spectroscopy in the 50–70 kyr age range
Although high-sensitivity liquid scintillation (LS) spectroscopy is theoretically capable of producing finite radiocarbon ages in the 50,000- to 70,000-yr range, there is little evidence in the literature that meaningful dates in this time period have been obtained. The pressing need to undertake calibration beyond 26 kyr has resulted in the regular publication of ¹⁴C results in excess of 50 kyr, yet very little effort has been made to demonstrate their accuracy or precision. There is a paucity of systematic studies of the techniques required to produce reliable dates close to background and the methods needed to assess contamination from either in situ sources or laboratory handling and processing. We have studied the requirements for producing accurate and reliable dates beyond 50 kyr. Laboratory procedures include optimization of LS spectrometers to obtain low and stable non-¹⁴C background count rates, use of low-background counting vials, large benzene volumes, long counting times, and preconditioning of vacuum lines. We also discuss the need for multiple analyses of a suitable material containing no original ¹⁴C (background blank) and the application of an appropriate statistical model to compensate for variability in background contamination beyond counting statistics. Accurate and reproducible finite ages >60 kyr are indeed possible by high-sensitivity LS spectroscopy, but require corroborating background blank data to be defensible
Production of 21 Ne in depth-profiled olivine from a 54 Ma basalt sequence, Eastern Highlands (37° S), Australia
In this study we investigate the cosmogenic neon component in olivine samples from a vertical profile in order to quantify muogenic 21Ne production in this mineral. Samples were collected from an 11 m thick Eocene basalt profile in the Eastern Highlands of southeastern Australia. An eruption age of 54.15 ± 0.36 Ma (2σ) was determined from 40Ar/39Ar step-heating experiments (n = 6) on three whole-rock samples. A 36Cl profile on the section indicated an apparent steady state erosion rate of 4.7 ± 0.5 m Ma−1. The eruption age was used to calculate in situ produced radiogenic 4He and nucleogenic 3He and 21Ne concentrations in olivine. Olivine mineral separates (n = 4), extracted from the upper two metres of the studied profile, reveal cosmogenic 21Ne concentrations that attenuate exponentially with depth. However, olivine (Fo68) extracted from below 2 m does not contain discernible 21Ne aside from magmatic and nucleogenic components, with the exception of one sample that apparently contained equal proportions of nucleogenic and muogenic neon. Modelling results suggest a muogenic neon sea-level high-latitude production rate of 0.02 ± 0.04 to 0.9 ± 1.3 atoms g−1 a−1 (1σ), or <2.5% of spallogenic cosmogenic 21Ne production at Earth’s surface. These data support a key implicit assumption in the literature that accumulation of muogenic 21Ne in olivine in surface samples is likely to be negligible/minimal compared to spallogenic 21Ne
Yangtse River sediments and erosion rates from source to sink traced with cosmogenic 10 Be: Sediments from major rivers
Estimates of regional erosion and sediment mixing from different sources in the Yangtse River system are presented, based on sand samples collected from major tributaries and the trunk stream, at 23 sites between western Sichuan and the Yangtse Delta. Mixing is estimated from concentrations of Mg, Ca, Sr, Ti, Mn and Fe, which are substantially higher in sand from major tributaries in the western Yangtse River catchment than from tributaries in the eastern catchment. Intermediate concentrations occur in sand from the Yangtse Delta, both for modern samples from the surface and for early Holocene samples from drill holes. Mixing ratios indicate that 35 ± 5% of sand in the delta came from eastern sources. A similar result was obtained using cosmogenic 10Be in quartz grains as a tracer of mixing. Regional erosion rate estimated from 10Be in sand grains from high mountain catchments of the western Yangtse River are mostly similar to rates based on sediment gauging but are sometimes higher, and range to over 700 m Ma- 1, while 10Be measured at upper Yangtse River tributaries on the northeast Tibetan plateau gave rates of 20-30 m Ma- 1. For the eastern catchments, 10Be measurements from quartz sand and sediment gauging both gave rates of 30-70 m Ma- 1. Eroding at this rate, the eastern catchments could not supply more than 20% of the sediment in the delta, in contrast with 35% estimated from geochemical fingerprints. The relative input from eastern sources may have been higher in Late Pleistocene times, under a different climatic regime, and reworking of Pleistocene deposits may still be in progress
Uranium comparison by means of AMS and ICP-MS and Pu and 137Cs results around an Italian nuclear power plant
Italy built and commissioned 4 nuclear power plants between 1958-1978, which delivered a total of 1500 MW. All four were closed down after the Chernobyl accident following a referendum in 1987. One of the plants was Garigliano, commissioned in 1959. This plant used a 160 MW BWR1 (SEU of 2.3 %) and was operational from 1964 to 1979, when it was switched off for maintenance. It was definitively stopped in 1982, and is presently being decommissioned. We report here details on the chemistry procedure and on the measurements for soil samples, collected up to 4.5 km from the Nuclear Plant. A comparison between uranium (238U) concentration as determined by means of AMS (Accelerator Mass Spectrometry) and by ICP-MS (Inductively Coupled Plasma-Mass Spectrometry) techniques respectively at the ANU (Australian National University) and at the Ecowise company in Canberra, Australia, is reported, as well as 236U and 239;240Pu concentration results detected by AMS. 236U/238U and 240Pu/239Pu isotopic ratios by means of AMS are also provided. A contamination from Chernobyl is visible in the 137Cs/239+240Pu activity ratio measurements
Potential of lichens for monitoring iodine-129 and chlorine-36
Chlorine-36 (half life 3.01 × 105 year), a beta emitter, is produced naturally but its presence has been enhanced by atmospheric weapons testing and other nuclear activities. Iodine-129 has a half life of 1.57 × 107 years and is also produced by nuclea
Improving the detection limit for 182 Hf
A nearby supernova would deposit radionuclides on earth. The long-lived radionuclide 182Hf (t1/2 = 8.9 Ma) is one of a number of candidates for an isotopic signature of such an event. Together with 60Fe, observation of 182Hf would be direct evidence for a supernova site of the r-process. The most suitable site for searching for such a signature would be a deep-sea sediment of slow deposition rate. Measurement of 182Hf at the anticipated level requires very effective suppression of the interfering stable isobar 182W. Chemical separation and the injection of HfF5- allow for suppression by several orders of magnitude, but more is needed for detection of 182Hf as a supernova isotope signature. We are currently developing AMS methods for measuring 182Hf/180Hf isotope ratios at the required level using a 15 MV tandem accelerator . Both projectile X-ray emission and the use of a solid passive absorber with a subsequent measurement of the residual energy are being explored. The former suffers from low efficiency, but the latter looks promising
AMS measurements of cosmogenic and supernova-ejected radionuclides in deep-sea sediment cores
Samples of two deep-sea sediment cores from the Indian Ocean are analyzed
with accelerator mass spectrometry (AMS) to search for traces of recent
supernova activity around 2 Myr ago. Here, long-lived radionuclides, which are
synthesized in massive stars and ejected in supernova explosions, namely 26Al,
53Mn and 60Fe, are extracted from the sediment samples. The cosmogenic isotope
10Be, which is mainly produced in the Earths atmosphere, is analyzed for dating
purposes of the marine sediment cores. The first AMS measurement results for
10Be and 26Al are presented, which represent for the first time a detailed
study in the time period of 1.7-3.1 Myr with high time resolution. Our first
results do not support a significant extraterrestrial signal of 26Al above
terrestrial background. However, there is evidence that, like 10Be, 26Al might
be a valuable isotope for dating of deep-sea sediment cores for the past few
million years.Comment: 5 pages, 2 figures, Proceedings of the Heavy Ion Accelerator
Symposium on Fundamental and Applied Science, 2013, will be published by the
EPJ Web of conference
Extending density surface models to include multiple and double-observer survey data
David L. Miller was funded by OPNAV N45 and the SURTASS LFA Settlement Agreement, being managed by the U.S. Navy’s Living Marine Resources program under Contract No. N39430-17-C-1982, collaboration between Douglas B. Sigourney and David L. Miller was also facilitated by the DenMod working group (https://synergy.st-andrews.ac.uk/denmod/) funded under the same agreement. The survey that the fin whale data originate from was funded through two inter-agency agreements with the National Marine Fisheries Service: inter-agency agreement number M14PG00005 with the US Department of the Interior, Bureau of Ocean Energy Management, Environmental Studies Program, Washington, DC and inter-agency agreement number NEC-16-011-01-FY18 with the US Navy. The survey that the fulmar data originate from was funded by the UK Natural Environmental Research Council (NERC) grant NE/M017990/1.Spatial models of density and abundance are widely used in both ecological research (e.g., to study habitat use) and wildlife management (e.g., for population monitoring and environmental impact assessment). Increasingly, modellers are tasked with integrating data from multiple sources, collected via different observation processes. Distance sampling is an efficient and widely used survey and analysis technique. Within this framework, observation processes are modelled via detection functions. We seek to take multiple data sources and fit them in a single spatial model. Density surface models (DSMs) are a two-stage approach: first accounting for detectability via distance sampling methods, then modelling distribution via a generalized additive model. However, current software and theory does not address the issue of multiple data sources. We extend the DSM approach to accommodate data from multiple surveys, collected via conventional distance sampling, double-observer distance sampling (used to account for incomplete detection at zero distance) and strip transects. Variance propagation ensures that uncertainty is correctly accounted for in final estimates of abundance. Methods described here are implemented in the dsm R package. We briefly analyse two datasets to illustrate these new developments. Our new methodology enables data from multiple distance sampling surveys of different types to be treated in a single spatial model, enabling more robust abundance estimation, potentially over wider geographical or temporal domains.Publisher PDFPeer reviewe
- …