Development of a Solar-Powered Integrated Wireless Soil Moisture Meter

In this study, we developed a solar-powered integrated wireless soil moisture meter that can easily measure in situ soil moisture, soil temperature, and hydrogen potential (pH) using nature\u27s solar energy. Knowledge of soil moisture content and other relevant soil-specific parameters is essential for irrigation scheduling, fertilizer selection, and fertigation. Also, considering that the electricity supply in some developing countries is either erratic or unavailable, this research aims to bridge the gap in electricity availability and ease of measurement and integrate more soil-specific parameters. The sensor system was developed using the frequency domain (FD) technique for fast response. These parameters were measured sequentially at an interval of about 5 seconds, with the readings displayed simultaneously on a Bluetooth-connected device (e.g., an Android phone) located about 50 meters away from the developed system. The different sensors are classified and adequately labeled to identify the parameter to be measured. The performance evaluation carried out indicated a reasonably functioning device that is cost-effective. The results obtained showed that the system was resourceful as it not only measured the parameters of interest (soil moisture, temperature, and pH) but also gave a prompt response in measurement and transmission. Overall, the developed wireless soil moisture meter provides instantaneous data on pH, moisture, and temperature circulation across soil layers. The system is promising as it can be integrated into large-scale automated irrigation systems for agricultural lands

Advances in ecotechnological methods for diffuse nutrient pollution control: wicked issues in agricultural and urban watersheds

Considerable time and funding have been committed to tackling nonpoint source (NPS) pollution in agricultural and urban watersheds . Notwithstanding all these efforts, the water quality in many AUWs has not significantly improved. Diffuse nutrient pollution involves the movement of these pollutants between soil and water. Excessive diffuse pollution has been accepted as one of the main causes of failure to attain favorable environmental conditions in freshwater systems. Recently, several technologies and practices have been implemented to manage diffuse pollution, namely: a) source reduction, b) pollutant retention over the movement process; c) nutrient recycling, and d) purification and restoration of the eutrophic water bodies. This paper synthesized the existing knowledge of key methods to tackle diffuse pollution from AUWs. Furthermore, the predominant purification mechanisms and impacting factors are explored, allowing a comprehensive and critical understanding of different control strategies to improve the management of diffuse pollution. Therefore, potential approaches for strengthening the performance of control technologies for diffuse pollution treatment and remediation are discussed. Although adopting source reduction strategies (e.g., the “4R” approach: right rate, right time, right source, and right placement of nutrients) could efficiently decrease surface runoff and pollutant levels, they may not stop runoff from entering nearby streams. Consequently, comprehensive treatment of agricultural runoff still requires extra process retention strategies. Overall, the findings of this paper showed that treatment system design and operational and environmental factors played crucial but variable roles in diffuse pollution treatment. Moreover, the results showed that combining or integrating constructed wetlands with other control technologies could enhance the comprehensive purification of diffuse pollution compared to using a single method. This review proposes a systematic approach for diffuse pollution control based on three components (water, soil and microbiota) and maximizing the regulating services of agroecosystems via land use/cover types. The current review contributes to the documentation of existing research trends. It sheds light on diffuse pollution control approaches in AUWs, and further encourages the development of this vital field

Recent advances on graphyne and its family members as membrane materials for water purification and desalination

Graphyne and its family members (GFMs) are allotropes of carbon (a class of 2D materials) having unique properties in form of structures, pores and atom hybridizations. Owing to their unique properties, GFMs have been widely utilized in various practical and theoretical applications. In the past decade, GFMs have received considerable attention in the area of water purification and desalination, especially in theoretical and computational aspects. More recently, GFMs have shown greater prospects in achieving optimal separation performance than the experimentally derived commercial polyamide membranes. In this review, recent theoretical and computational advances made in the GFMs research as it relates to water purification and desalination are summarized. Brief details on the properties of GFMs and the commonly used computational methods were described. More specifically, we systematically reviewed the various computational approaches employed with emphasis on the predicted permeability and selectivity of the GFM membranes. Finally, the current challenges limiting their large-scale practical applications coupled with the possible research directions for overcoming the challenges are proposed

Concentrations, bioaccumulation, and health risk assessments of heavy metals in fishes from Nigeria’s freshwater: a general overview

Heavy metals (HMs) have attracted global attention due to their toxicity, persistence, and accumulation in aquatic fish in the polluted water environment. The consumption of these fishes exposed humans to a higher risk of non-carcinogenic and carcinogenic risks. In this study, we provided a critical overview of the potential sources and concentration of HMs in Nigeria’s freshwater. Furthermore, we reported their pollution level in widely eaten fish species in the country. Our findings show that effluent from anthropogenic and industrial activities is one of the major sources HMs in the country. The mean concentration of Zn (9.02 mg/L), As (7.25 mg/L), Cu (4.35 mg/L), Fe (1.77 mg/L), and Pb (1.46 mg/L) in Nigeria’s freshwaters were found to be high than Nigerian Standard for Drinking Water Quality permissible limit. This study demonstrated considerable health risks associated HMs via dietary consumption of different fishes from polluted waters. Therefore, we recommended an urgent need for effective management HMs in water bodies in order to protect the lives of people living in the country

Advances in ecotechnological methods for diffuse nutrient pollution control: wicked issues in agricultural and urban watersheds

Considerable time and funding have been committed to tackling nonpoint source (NPS) pollution in agricultural and urban watersheds . Notwithstanding all these efforts, the water quality in many AUWs has not significantly improved. Diffuse nutrient pollution involves the movement of these pollutants between soil and water. Excessive diffuse pollution has been accepted as one of the main causes of failure to attain favorable environmental conditions in freshwater systems. Recently, several technologies and practices have been implemented to manage diffuse pollution, namely: a) source reduction, b) pollutant retention over the movement process; c) nutrient recycling, and d) purification and restoration of the eutrophic water bodies. This paper synthesized the existing knowledge of key methods to tackle diffuse pollution from AUWs. Furthermore, the predominant purification mechanisms and impacting factors are explored, allowing a comprehensive and critical understanding of different control strategies to improve the management of diffuse pollution. Therefore, potential approaches for strengthening the performance of control technologies for diffuse pollution treatment and remediation are discussed. Although adopting source reduction strategies (e.g., the “4R” approach: right rate, right time, right source, and right placement of nutrients) could efficiently decrease surface runoff and pollutant levels, they may not stop runoff from entering nearby streams. Consequently, comprehensive treatment of agricultural runoff still requires extra process retention strategies. Overall, the findings of this paper showed that treatment system design and operational and environmental factors played crucial but variable roles in diffuse pollution treatment. Moreover, the results showed that combining or integrating constructed wetlands with other control technologies could enhance the comprehensive purification of diffuse pollution compared to using a single method. This review proposes a systematic approach for diffuse pollution control based on three components (water, soil and microbiota) and maximizing the regulating services of agroecosystems via land use/cover types. The current review contributes to the documentation of existing research trends. It sheds light on diffuse pollution control approaches in AUWs, and further encourages the development of this vital field

Risk Assessment of Heavy Metals Occurrence in Two Wild Edible Oyster Mushrooms (Pleurotus spp.) Collected from Rajaji National Park

This study aimed at assessing the concentration of six heavy metals (Cd, Cr, Cu, Fe, Mn, and Zn) in two wild edible oyster mushrooms (Pleurotus ostreatus and Pleurotus djamor) collected from Rajaji National Park in Haridwar, India. For this purpose, mushroom samples were collected from selected locations (forest, residential, tourist, industrial areas, and transportation activities) from June 2021 to July 2022 and subsequently analyzed for selected heavy metals using atomic absorption spectroscopy (AAS). Results showed that both Pleurotus spp. had significantly varying (p < 0.05) concentrations of heavy metals. However, P. ostreatus showed relatively higher concentration levels of these metals compared to P. djamor. The mean concentrations (mg/kg dry weight) of the Cd, Cr, Cu, Fe, Mn, and Zn in P. ostreatus and P. djamor were 0.10 and 0.08, 0.87 and 0.64, 16.19 and 14.77, 28.49 and 27.15, 9.93 and 8.73, and 18.15 and 15.76, respectively. As indicated by the multivariate analysis tools i.e., principal component analysis (PCA) and hierarchical cluster analysis (HCA), the locations near the residential, industrial, and transportation activities had higher concentration levels of heavy metals. Moreover, the health risk studies using the target hazard quotient (THQ < 1) showed no significant health risk as the consumption of both Pleurotus spp., except for at one location, had high-traffic activities. The findings of this study provide vital information about the occurrence of potentially toxic heavy metals in wild edible Pleurotus spp. in Rajaji National Park in Haridwar, India representing a safeguard for mushroom consumers

Kinetic Studies on Delignification and Heavy Metals Uptake by Shiitake (<i>Lentinula edodes</i>) Mushroom Cultivated on Agro-Industrial Wastes

This study investigates the sustainable production of Shiitake (Lentinula edodes) mushroom using agro-industrial wastes. The substrate of Shiitake (80% rice straw + 20% sugar cane bagasse) was moistened with 0 (freshwater as control), 50, and 100% concentrations of secondarily treated dairy plant and sugar mill wastewaters (DPW and SMW). After proper sterilization, the cultivation was carried out under controlled environmental conditions using the bag log method for 100 days. The results revealed that DPW and SMW moistening significantly (p < 0.05) increased the nutrient levels of the formulated substrate which later gave better mushroom yield. The highest Shiitake mycelial coverage (90.70 ± 1.47 and 88.65 ± 1.82%), yield (186.00 ± 3.10 and 176.09 ± 4.12 g/kg fresh substrate), biological efficiency (80.00 ± 0.58 and 75.73 ± 0.93%), total phenol (2.84 ± 0.03 and 2.69 ± 0.03 mg/g), ascorbic acid (0.34 ± 0.03 and 0.32 ± 0.02 mg/g), and β-carotene (2.48 ± 0.06 and 2.29 ± 0.02 μg/g) contents with the minimum time taken for spawn running (60 ± 1 days) was observed using a 50% concentration treatment of both DPW and SMW, respectively. Besides this, the kinetic studies using a first-order-based model showed acceptable accuracy in predicting the rate constant for substrate delignification and heavy metal uptake by Shiitake mushroom. These findings suggest a novel approach for sustainable mushroom cultivation using agro-industrial wastes. The concept can be used for the production of high-quality mushrooms for edible and medicinal purposes while contributing toward the United Nations’ Sustainable Development Goals (SDGs 12) on responsible consumption and production of superfoods

Sustainable Management of Sewage Sludge Using Dhaincha (<i>Sesbania bispinosa</i> (Jacq.) W.Wight) Cultivation: Studies on Heavy Metal Uptake and Characterization of Fibers

In this study, the potential use of sewage sludge (SS) as a fertilizer source for cultivated Dhaincha (Sesbania bispinosa (Jacq.) W.Wight) crops was investigated. Field experiments were conducted using different doses of SS such as 0% (T0), 5% (T1), 10% (T2), and 15% (T3) to amend the soil (w/w). The findings showed that soil amended with SS significantly (p S. bispinosa with an increase in the dose of SS from 0% to 15%. In particular, the T3 treatment gave the best results (mean values) for plant growth and yield parameters such as plant height (380.59 cm), fresh weight (1.47 kg/plant), dry weight (0.27 kg/plant), base diameter (3.19 cm), seed yield (44.71 g/plant), total chlorophyll (3.15 mg/g fwt), carotenoids (0.88 mg/g fwt), carbohydrates (9.40 mg/g), and phenol (0.13 mg/g) contents. Moreover, the selected proximate and fiber characteristics of the S. bispinosa crop were significantly (p 3), and luster (45.65%) compared with the control treatment (T0). The bioaccumulation factor (BAF) studies showed that the S. bispinosa plant was capable of accumulating selected heavy metals from the soil following the order: Fe > Mn > Zn > Cu > Cd > Cr. The study suggested a sustainable approach for efficient soil fertilization and high-quality S. bispinosa fiber production that could minimize the environmental pollution caused by the unsafe disposal of SS

Biotransforming the Spent Substrate of Shiitake Mushroom (<i>Lentinula edodes</i> Berk.): A Synergistic Approach to Biogas Production and Tomato (<i>Solanum lycopersicum</i> L.) Fertilization

Agro-wastes, such as crop residues, leaf litter, and sawdust, are major contributors to global greenhouse gas emissions, and consequently a major concern for climate change. Nowadays, mushroom cultivation has appeared as an emerging agribusiness that helps in the sustainable management of agro-wastes. However, partial utilization of agro-wastes by mushrooms results in the generation of a significant quantity of spent mushroom substrates (SMS) that have continued to become an environmental problem. In particular, Shiitake (Lentinula edodes Berk.) mushrooms can be grown on different types of agro-wastes and also generate a considerable amount of SMS. Therefore, this study investigates the biotransformation of SMS obtained after Shiitake mushroom cultivation into biogas and attendant utilization of slurry digestate (SD) in tomato (Solanum lycopersicum L.) crop fertilization. Biogas production experiments were conducted anaerobically using four treatments of SMS, i.e., 0% (control), 25, 50, and 75% inoculated with a proportional amount of cow dung (CD) as inoculum. The results on biogas production revealed that SMS 50% treatment yielded the highest biogas volume (8834 mL or 11.93 mL/g of organic carbon) and methane contents (61%) along with maximum reduction of physicochemical and proximate parameters of slurry. Furthermore, the biogas digestate from 50% treatment further helped to increase the seed germination (93.25%), seedling length (9.2 cm), seedling root length (4.19 cm), plant height (53.10 cm), chlorophyll content (3.38 mg/g), total yield (1.86 kg/plant), flavonoids (5.06 mg/g), phenolics (2.78 mg/g), and tannin (3.40 mg/g) contents of tomato significantly (p < 0.05) in the 10% loading rate. The findings of this study suggest sustainable upcycling of SMS inspired by a circular economy approach through synergistic production of bioenergy and secondary fruit crops, which could potentially contribute to minimize the carbon footprints of the mushroom production sector

Sustainable use of sewage sludge as a casing material for button mushroom (Agaricus bisporus) cultivation: experimental and prediction modeling studies for uptake of metal elements

The present study focused on the use of sewage sludge (SS) as a casing material amendment and the potential uptake of metal elements by the cultivated white button (Agaricus bisporus: MS-39) mushroom. Laboratory experiments were performed under controlled environmental conditions to grow A. bisporus on the composted wheat straw substrate for 50 days. Different treatments (0, 50, 100, 150, and 200 g/kg) of casing material were prepared by mixing garden and dried SS and applied on the mushroom substrate after proper sterilization. The results revealed that SS application was significant (p 0.9900), high model efficiency (ME > 0.98), and low root mean square error (RMSE < 0.410) values, respectively. The findings of this study represent sustainable use of SS for the formulation of mushroom casing material contributing toward synergistic agro-economy generation and waste management