Cosmological Evolution of Brane World Moduli

We study cosmological consequences of non-constant brane world moduli in five dimensional brane world models with bulk scalars and two boundary branes. We focus on the case where the brane tension is an exponential function of the bulk scalar field, $U_b \propto \exp{(\alpha \phi)}$. In the limit $\alpha \to 0$, the model reduces to the two-brane model of Randall-Sundrum, whereas larger values of $\alpha$ allow for a less warped bulk geometry. Using the moduli space approximation, we derive the four-dimensional low-energy effective action from a supergravity-inspired five-dimensional theory. For arbitrary values of $\alpha$, the resulting theory has the form of a bi-scalar-tensor theory. We show that, in order to be consistent with local gravitational observations, $\alpha$ has to be small (less than $10^{-2}$) and the separation of the branes must be large. We study the cosmological evolution of the interbrane distance and the bulk scalar field for different matter contents on each branes. Our findings indicate that attractor solutions exist which drive the moduli fields towards values consistent with observations. The efficiency of the attractor mechanism crucially depends on the matter content on each branes. In the five-dimensional description, the attractors correspond to the motion of the negative tension brane towards a bulk singularity, which signals the eventual breakdown of the four-dimensional description and the necessity of a better understanding of the bulk singularity.Comment: 18 pages, 10 figures, typos and factor of 2 corrected, version to appear in Physical Review

Juvenile polyposis of infancy in a child with deletion of BMPR1A and PTEN genes: Surgical approach

Juvenile polyposis of infancy is the most severe and life-threatening form of juvenile polyposis. This disease typically presents in the first two years of life with gastrointestinal bleeding, diarrhea, inanition, and exudative enteropathy. In very few reports concerning this entity, a large deletion in the long arm of chromosome 10 (10q23), encompassing the PTEN and BMPR1A genes, was found. The authors report a case of delayed diagnosis of juvenile polyposis of infancy at 6years of age. A 3.34Mb long de novo deletion was identified at 10q23.1q23.31, encompassing the PTEN and BMPR1A genes. The disease course was severe with diarrhea, abdominal pain, inanition, refractory anemia, rectal bleeding, hypoalbuminemia, and exudative enteropathy. A sub-total colectomy, combined with intraoperative endoscopic removal of ileal and rectal stump polyps, was required for palliative disease control

Corrosion behaviour of substoichiometric TiNx films produced by DC magnetron sputtering

The present work describes the corrosion behaviour of substoichiometric TiNx films obtained by dc reactive magnetron sputtering. The coatings thickness ranged from 1.7 to 4.2 µm and the nitrogen content varied between 0 and 55 at. %. According to structural characterization by XRD, the films revealed a hexagonal α-Ti phase with a strong [002] orientation for low nitrogen contents. For nitrogen contents of 20% and 30%, the ε-Ti2N phase appears with a [200] orientation and further increasing of nitrogen content showed that the δ-TiN phase was dominant. Potentiodynamic polarisation and Electrochemical Impedance Spectroscopy (EIS) techniques were used to study the corrosion properties of TiNx films when immersed in artificial sweat solutions. Results of potentiodynamic polarisation tests showed that all films have a high corrosion resistance reflected by corrosion current densities values lower than 0.7µA/cm2. Also, EIS tests corroborated the results obtained in the polarisation tests, showing that films containing low percentages of nitrogen (less than 8 %) reveal the best corrosion resistance. Further increases in nitrogen content lead to a decrease in corrosion resistance. An exception to this behaviour was found for the film, with 30 % N. This sample presents an excellent corrosion resistance which increases with the immersion time. Higher nitrogen contents (52 and 55 %) promote a relative increase in the corrosion resistance when compared with 45 and 50 at % films, but never reaching values obtained for nitrogen contents lower than 30 % at.Fundação para a Ciência e a Tecnologia - (FCT

Corrosion behaviour of single layered ZrNxOy thin films in artificial sweat solutions

Applications of coloured thin films can be found on the production of high-quality consumer products, such as eyeglass frames, wristwatch casings and wristbands. These components should possess scratch and corrosion resistant surfaces through the desired lifetime. Recently, metal oxynitrides, MeNxOy (Me = early transition metal) were proposed for decorative applications. In these materials, variations on the amount of oxygen allow the film properties to be tailored, originating a wide range of colours. Additionally, these materials should also fulfil the wear and corrosion requirements above referred. In the present work the corrosion behaviour of single layered zirconium oxynitride, ZrNxOy films, immersed in artificial sweat solutions, is described. Films were produced by rf reactive magnetron sputtering at a constant substrate temperature of 300 ºC, from a pure Zr target. The main processing variable was the flow rate of reactive. The corrosion resistance was evaluated by potentiodynamic polarisation tests and Electrochemical Impedance Spectroscopy (EIS) at different immersion times, at room temperature. The corrosion resistance of the films is strongly affected by the O/N ratio. A slight tendency to improving the corrosion resistance of the films was found with the increasing in the atomic fraction of oxygen. Nevertheless, pitting was found in all samples. However, the amount of pits seems to be strongly dependent not only on the composition of the film, but also on the processing-induced defects distribution.European Union, FCT- Portugal and European community (FEDER)

Tribocorrosion behaviour of zrNxOy thin films for decorative applications

The main aim of this work is the investigation of the tribocorrosion behaviour of single layered zirconium oxynitride, ZrNxOy, thin films in alternative linear regime of sliding and immersed in an artificial sweat solution at room temperature. The films were produced by rf reactive magnetron sputtering, using a pure Zr target at a constant temperature of 300º C. Two different sets of samples were produced. In the first set of films the substrate bias voltage was the main variable, whereas in the second set, the flow rate of reactive gases (oxygen/nitrogen ratio) was varied. The control of the amount of oxygen allowed the film properties to be tailored from those of covalent zirconium nitride to those of the correspondent ionic oxide. During the wear test both the open circuit potential and the corrosion current were monitored. Also, Electrochemical Impedance Spectroscopy (EIS) tests were performed before and after sliding in order to evaluate, in detail, the modification of the protective character of the coating introduced by the joint action of wear and corrosion. The modifications of the coating microstructure and/or chemical composition induced by the variation of the deposition parameters was also evaluated and correlated with the corrosion mechanisms occurring in each system

Corrosion resistance of ZrNxOy thin films obtained by rf reactive magnetron sputtering

The main aim of this work is the investigation of the corrosion resistance of single layered zirconium oxynitride, ZrNxOy, thin films in artificial sweat solution at ambient emperature. The films were produced by rf reactive magnetron sputtering, using a pure Zr target at a constant temperature of 300 8C. Two different sets of samples were produced. In the first set of films, the substrate bias voltage was the main variable, whereas in the second set, the flow rate of reactive gases (oxygen/nitrogen ratio) was varied. The control of the amount of oxygen allowed the film properties to be tailored from those of covalent zirconium nitride to those of the correspondent ionic oxide. The corrosion behaviour was evaluated by potentiodynamic polarization and Electrochemical Impedance Spectroscopy (EIS) tests. The analysis of EIS data provided detailed information of the corrosion processes occurring at the surface of the system throughout the immersion time. The modifications of the coating microstructure and/or chemical composition induced by the variation of the deposition parameters were also evaluated and correlated with the corrosion mechanisms occurring in each system

Giant magnetoresistance of multiwall carbon nanotubes: modeling the tube/ferromagnetic-electrode burying contact

We report on the giant magnetoresistance (GMR) of multiwall carbon nanotubes with ultra small diameters. In particular, we consider the effect of the inter-wall interactions and the lead/nanotube coupling. Comparative studies have been performed to show that in the case when all walls are well coupled to the electrodes, the so-called inverse GMR can appear. The tendency towards a negative GMR depends on the inter-wall interaction and on the nanotube le ngth. If, however, the inner nanotubes are out of contact with one of the electrodes, the GMR remains positive even for relatively strong inter-wall interactions regardless of the outer nanotube length. These results shed additional light on recently reported experimental data, where an inverse GMR was found in some multiwall carbon nanotube samples.Comment: 5 pages, 5 figure

Unconventional motional narrowing in the optical spectrum of a semiconductor quantum dot

Motional narrowing refers to the striking phenomenon where the resonance line of a system coupled to a reservoir becomes narrower when increasing the reservoir fluctuation. A textbook example is found in nuclear magnetic resonance, where the fluctuating local magnetic fields created by randomly oriented nuclear spins are averaged when the motion of the nuclei is thermally activated. The existence of a motional narrowing effect in the optical response of semiconductor quantum dots remains so far unexplored. This effect may be important in this instance since the decoherence dynamics is a central issue for the implementation of quantum information processing based on quantum dots. Here we report on the experimental evidence of motional narrowing in the optical spectrum of a semiconductor quantum dot broadened by the spectral diffusion phenomenon. Surprisingly, motional narrowing is achieved when decreasing incident power or temperature, in contrast with the standard phenomenology observed for nuclear magnetic resonance