A sprayed graphene transistor platform for rapid and low-cost chemical sensing

We demonstrate a novel and versatile sensing platform, based on electrolyte-gated graphene field-effect transistors, for easy, low-cost and scalable production of chemical sensor test strips. The Lab-on-PCB platform is enabled by low-boiling, low-surface-tension sprayable graphene ink deposited on a substrate manufactured using a commercial printed circuit board process. We demonstrate the versatility of the platform by sensing pH and Na+ concentrations in an aqueous solution, achieving a sensitivity of 143 ± 4 μA per pH and 131 ± 5 μA per log10Na+, respectively, in line with state-of-the-art graphene chemical sensing performance

Parylene C-based, breathable tattoo electrode for high-quality biopotential measurements

A breathable tattoo electrode for bio-potential recording based on a Parylene C nanofilm is presented in this study. The proposed approach allows for the fabrication of micro-perforated epidermal submicrometer-thick electrodes that conjugate the unobtrusiveness of Parylene C nanofilms and the very important feature of breathability. The electrodes were fully validated for electrocardiography (ECG) measurements showing performance comparable to that of conventional disposable gelled Ag/AgCl electrodes, with no visible negative effect on the skin even many hours after their application. This result introduces interesting perspectives in the field of epidermal electronics, particularly in applications where critical on-body measurements are involved

Conducting materials as building blocks for electronic textiles

To realize the full gamut of functions that are envisaged for electronic textiles (e-textiles) a range of semiconducting, conducting and electrochemically active materials are needed. This article will discuss how metals, conducting polymers, carbon nanotubes, and two-dimensional (2D) materials, including graphene and MXenes, can be used in concert to create e-textile materials, from fibers and yarns to patterned fabrics. Many of the most promising architectures utilize several classes of materials (e.g., elastic fibers composed of a conducting material and a stretchable polymer, or textile devices constructed with conducting polymers or 2D materials and metal electrodes). While an increasing number of materials and devices display a promising degree of wash and wear resistance, sustainability aspects of e-textiles will require greater attention

Graphene production by cracking

n recent years, graphene has found its use in numerous industrial applications due to its unique properties. While its impermeable and conductive nature can replace currently used anticorrosive toxic pigments in coating systems, due to its large strength to weight ratio, graphene can be an important component as a next-generation additive for automotive, aerospace & construction applications. The current bottlenecks in using graphene & graphene oxide and other 2D materials are the availability of cost-effective, high-quality materials and their effective incorporation (functionalisation and dispersion)into the product matrices. On overcoming these factors, graphene may attract significant demands in terms of volume consumption. Graphene can be produced on industrial scales and cost-effective top-down routes such as chemical, electro chemical, and/or high-pressure mechanical exfoliation. Graphene depending on end applications can be chemically tuned and modified via functionalisation so that easy incorporation into product matrices is possible. This paper discusses different production methods and their impact on the quality of graphene produced in terms of energy input. Graphene with an average thickness below five layers were produced by both methods with varied defects. However, a higher yield of graphene with a lower number of layers was produced by the high-pressure exfoliation route