A Preliminary Color Study of Different Basil-Based Semi-Finished Products during Their Storage

open6: Basil-based semi-finished products, which are mainly used as an intermediate to produce the typical pesto sauce, are prepared and exported all over the world. Color is a fundamental organoleptic requirement for the acceptability of these semi-finished products by the manufacturers of the pesto sauce. Some alternative formulations, which adjust the typical industrial recipe by both changing the preservative agent (ascorbic acid, citric acid, or a mixture of both) and introducing a preliminary thermic treatment (blast chilling), were evaluated. In this work, a fast and non-destructive spectrophotometric analysis, to monitor the color variations in these food products during their shelf-life, was proposed. The raw diffuse reflectance spectra (380–900 nm) obtained by a UV–visible spectrophotometer, endowed with an integrating sphere, together with the CIELab parameters (L*, a*, b*) automatically obtained from these, were considered, and elaborated using multivariate statistical analysis (principal component analysis). From this preliminary study, blast chilling, together with the use of ascorbic acid, proved to be the best solution to better preserve the color of these products during their shelf-life.openTurrini, Federica; Farinini, Emanuele; Leardi, Riccardo; Grasso, Federica; Orlandi, Valentina; Boggia, Raffaella;Turrini, Federica; Farinini, Emanuele; Leardi, Riccardo; Grasso, Federica; Orlandi, Valentina; Boggia, Raffaell

Feasibility of Enzymatic Protein Extraction from a Dehydrated Fish Biomass Obtained from Unsorted Canned Yellowfin Tuna Side Streams: Part II

The enzymatic extraction of proteins from fish biomasses is being widely investigated. However, little or almost no research has paid attention to the exploitation of unsorted fishery biomasses. This work is part of a larger study, Part I of which has already been published, and focuses on an extensive characterization of two collagenous samples, namely gelatin (G) and hydrolyzed gelatin peptides (HGPs), extracted from a dehydrated fish biomass coming from unsorted canned yellowfin tuna side streams. The results indicate crude protein fractions of 90–93%, pH values between 3 and 5, white–yellow colors, collagen-like FTIR spectra, and 17% in terms of total amino acid content. Viscosity and the study of dynamic viscous–elastic behavior were analyzed. Thermo-gravimetric analysis was performed to assess the residual ashes. Both samples were investigated to determine their molecular weight distribution via size-exclusion chromatography, with a higher total average molecular weight for G compared to HGPs, with values of 17,265.5 Da and 2637.5 Da, respectively. G demonstrated technological properties similar to analogous marine gelatins. HGPs demonstrated antioxidant activity as per FRAP assay. All the results open up new perspectives for the potential use of these substances in biodegradable packaging, dietary supplements, and skin care cosmetics.publishedVersio

Case Report Hepatitis B Reactivation in a HBsAg-Negative, HBcAb-Positive Patient Receiving Fludarabine for the Treatment of Chronic Lymphocytic Leukaemia

Hepatitis B virus (HBV) reactivation is an increasingly recognized cause of morbidity and mortality in patients undergoing chemotherapy. In haematology, the risk of reactivation of B hepatitis among HBsAg-positive patients has been documented; therefore, use of lamivudine prophylaxis is recommended before starting chemotherapy. Differently, for HBsAg-negative patients with markers of previous HBV infection (i.e., presence of isolated anti-HBc positivity) (anticore patients) management strategies are not univocal. We describe a rare case of HBV reactivation in an anticore patient after fludarabine therapy for chronic lymphocytic leukaemia. The patient fully recovered after a 6-month course of lamivudine with persistent HBV-DNA clearance and loss of HBsAg. The most important feature of this case is that fludarabine alone infrequently determines HBV reactivation, especially in anticore patients. Therefore, we suggest that patients candidates to receive fludarabine therapy should be considered for lamivudine prophylaxis, not only if HBsAg-positive, but even if anticore-positive only

Antioxidant Marine Hydrolysates Isolated from Tuna Mixed Byproducts: An Example of Fishery Side Streams Upcycling

publishedVersio

Cationic Polystyrene-Based Hydrogels as Efficient Adsorbents to Remove Methyl Orange and Fluorescein Dye Pollutants from Industrial Wastewater

Water pollution from dyes is harmful to the environment, plants, animals, and humans and is one of the most widespread problems afflicting people throughout the world. Adsorption is a widely used method to remove contaminants derived from the textile industry, food colorants, printing, and cosmetic manufacturing from water. Here, aiming to develop new low-cost and up scalable adsorbent materials for anionic dye remediation and water decontamination by electrostatic interactions, two cationic resins (R1 and R2) were prepared. In particular, they were obtained by copolymerizing 4-ammonium methyl and ethyl styrene monomers (M1 and M2) with dimethy lacrylamide (DMAA), using N-(2-acryloylamino-ethyl)-acrylamide (AAEA) as cross-linker. Once characterized by several analytical techniques, upon their dispersion in an excess of water, R1 and R2 provided the R1- and R2-based hydrogels (namely R1HG and R2HG) with equilibrium degrees of swelling (EDS) of 900% and 1000% and equilibrium water contents (EWC) of 90 and 91%, respectively. By applying Cross’ rheology equation to the data of R1HG and R2HG’s viscosity vs. shear rate, it was established that both hydrogels are shear thinning fluids with pseudoplastic/Bingham plastic behav ior depending on share rate. The equivalents of -NH3 + groups, essential for the electrostatic-based absorbent activity, were estimated by the method of Gaur and Gupta on R1 and R2 and by potentio metric titrations on R1HG and R2HG. In absorption experiments in bulk, R1HG and R2HG showed high removal efficiency (97–100%) towards methyl orange (MO) azo dye, fluorescein (F), and their mixture (MOF). Using F or MO solutions (pH = 7.5, room temperature), the maximum absorption was 47.8 mg/g in 900 (F) and 47.7 mg/g in 1200 (MO) for R1, while that of R2 was 49.0 mg/g in 200 (F) and 48.5 mg/g in 300 (MO). Additionally, R1HG and R2HG-based columns, mimicking decontamination systems by filtration, were capable of removing MO, F, and MOF from water with a 100% removal efficiency, in different conditions of use. R1HG and R2HG represent low-cost and up-scalable column packing materials that are promising for application in industrial wastewater treatment

Flow Index accurately identifies breaths with low or high inspiratory effort during pressure support ventilation

Background Flow Index, a numerical expression of the shape of the inspiratory flow-time waveform recorded during pressure support ventilation, is associated with patient inspiratory effort. The aim of this study was to assess the accuracy of Flow Index in detecting high or low inspiratory effort during pressure support ventilation and to establish cutoff values for the Flow index to identify these conditions. The secondary aim was to compare the performance of Flow index,of breathing pattern parameters and of airway occlusion pressure (P0.1) in detecting high or low inspiratory effort during pressure support ventilation. Methods Data from 24 subjects was included in the analysis, accounting for a total of 702 breaths. Breaths with high inspiratory effort were defined by a pressure developed by inspiratory muscles (Pmusc) greater than 10 cmH2O while breaths with low inspiratory effort were defined by a Pmusc lower than 5 cmH2O. The areas under the receiver operating characteristic curves of Flow Index and respiratory rate, tidal volume,respiratory rate over tidal volume and P0.1 were analyzed and compared to identify breaths with low or high inspiratory effort. Results Pmusc, P0.1, Pressure Time Product and Flow Index differed between breaths with high, low and intermediate inspiratory effort, while RR, RR/VT and VT/kg of IBW did not differ in a statistically significant way. A Flow index higher than 4.5 identified breaths with high inspiratory effort [AUC 0.89 (CI 95% 0.85–0.93)], a Flow Index lower than 2.6 identified breaths with low inspiratory effort [AUC 0.80 (CI 95% 0.76–0.83)]. Conclusions Flow Index is accurate in detecting high and low spontaneous inspiratory effort during pressure support ventilation