Evaluation of the time required to perform three retreatment techniques with dental microscope and ultrasonic activation for removing filling material from the oval root canal

When endodontic treatment fails, retreatment consists of the complete removal of the root canal filling material for thorough cleaning and reobturation. Various techniques are available for the filling removal procedure, which present varying degrees of efficacy, and take a varying length of time to perform. The aim of this study was to compare the time required to carry out reciprocating, rotary, and manual techniques with dental microscope and ultrasonic activation for removing filling material from root canals. Ninety-nine extracted single-rooted teeth with straight and oval-shaped canals were selected. The samples were instrumented with ProTaper Gold System up to file F2 and obturated with AH Plus sealer and GuttaCore. The teeth were randomly divided into three groups (n=33) according to the instruments used for removal of filling material: Group (1) Reciproc blue R50 instrument; Group (2) ProTaper Retreatment instruments; Group (3) manual (Hedstrom files and Gates-Glidden drills), under dental microscope at X10 magnification with Ultrasonic retreatment tip. The time required to remove the filling materials was measured with a chronometer. Data were analyzed statistically applying the Kruskal-Wallis test followed by the Mann-Whitney U-test (p<0.05). The time required to remove filling material was significantly shorter in Group 1, followed by Group 2, the slowest being Group 3 (P<0.05). The reciprocating technique was the fastest method for removing root canal filling material

Severe tetracycline dental discoloration : restoration with conventional feldspathic ceramic veneers. A clinical report

The treatment of severe tetracycline discoloration is a challenge for the dentist. There are several treatment options and one of the most effective is the use of feldspathic veneers. The aim of this clinical case was to carry out the replacement with conventional feldspathic ceramic veneers on a patient with highly stained teeth (grade IV tetracycline) by a minimally invasive approach. Clinical examination revealed gingival retraction, color change of the veneers, ceramic cracked of 1.1 and 1.3 and incisal wear in lower anterior teeth. The decision was to retreat with feldspathic ceramic veneers from 1.6 to 2.6. Premolars and first molars were included because its dark color intensifies the width buccal corridors. Also, the restoration with veneers from 3.3 to 4.3 was considered. Firstly, the veneers were removed and the color was selected by the Vitapan 3D Master guide (Vita Zahnfabrick, Bad Säckingen, Germany). Mock-up was made to evaluate aesthetic, phonetic and functional parameters. Then, teeth were prepared through the mock-up in order to reduce the minimal amount of dental tissue possible. Opaque dentine mass of microhybrid composite (Esthet-X A2O, Dentsply Sirona, Konstanz, Germany) was placed to mask the most intense stains. The definitive impressions were taken with silicone (Aquasil Ultra XLV, Dentsply Sirona, Konstanz, Germany) were taken to fabricate conventional feldsphatic ceramic veneers (Noritake kisai Co, Ltd. Japan) by the parallel stratification masking technique. For cementing, an opaque cement was selected from the try-in tests (Calibra, Dentsply Sirona, Konstanz, Germany) and the composite was silicatized with an air-abrasion device. A favorable and minimally invasive result was achieved to treat grade IV tetracycline stains, surpassing the patient?s aesthetic expectations and functional needs

Orthodontics and veneers to restore the anterior guidance. A minimally invasive approach

Tooth wear is defined as the progressive loss of a tooth?s surface due to actions other than those which cause tooth decay or dental trauma. It is a pathological condition with an increasing prevalence among young people. The aim of this article is to describe an alternative treatment modality to rehabilitate the anterior guidance by a minimally invasive interdisciplinary ortho-restorative treatment. Two patients came to the dental clinic for restorative treatment in order to rehabilitate the worn anterior dentition. Clinical analysis showed tooth surface loss located at the incisal edges by attrition due to an inadequate anterior guidance. In both cases the occlusal vertical dimension was reduced. First, following Dahl?s principle, resin attachments were placed in the upper canines. These attachments allowed the extrusion of posterior teeth in order to increase the occlusal vertical dimension. Furthermore, anterior teeth were intruded in order to create space for the restorative material. In the second phase, the restorative treatment was completed. Due to the characteristics of the case, feldspathic ceramic veneers were indicated. A diagnostic wax-up was performed to assist the treatment planning and a mock-up was prepared. Then, maxillary incisors were prepared through the mock-up to ensure a minimally invasive technique. Afterwards, silicone impressions were taken. Finally, veneers were cemented with a light-cured cement. In the present case, the functional and aesthetic parameters required by the patients were achieved, thus satisfying their needs

Traumatic dental injuries among schoolchildren in Valencia, Spain

Aim: The aim of the present study was to identify some factors related to the occurrence of dental trauma in mixed and permanent dentition. Design of the study: Over a period of two months 1325, 6 to 18 year olds from three primary schools in Valencia were examined. Data was collected through clinical examinations and interviews and their Dental trauma was classified according to IADT´s criteria. Results: The prevalence of dental injuries was 6%; boys aged between 12-18 years old experienced more injuries than girls. There was a statistical difference between the types of fractures. Non complicated coronal fractures were the most frequent (9.18%). Games were the main cause of trauma (40%) in both sexes. In 14.3% of patients a dental colour change was observed. Angle´s class I was the most frequent in traumatized injured children (41.2%). Conclusions: The present study revealed a relatively low prevalence of dental trauma, but this figure still represents a large number of children. Therefore, educational programs are to be initiated for the community regarding causes , prevention and treatments of traumatic dental injuries

Incidence of traumatic dental injury in Valencia, Spain

While traumatic dental injuries (TDI) are an increasingly frequent occurrence in everyday dental practice, little research on TDIs has been published in Spain. The aim of this study was to determine the incidence of TDIs in a population in Valencia (Spain) and investigate influential variables. In addition, a protocol for TDI data collection is proposed. This retrospective study compiled data from patients attending a private dental clinic between January 2003 and December 2014. The data were collected using a specially-elaborated protocol entitled ?Emergency care of acute dental trauma?. Patients responded to each item, and data was added from case radiographs and photographs. Data were entered in a Microsoft Office Excel spreadsheet and submitted for analysis by SPSS 15.0 software (Chicago, IL) applying 2-way analysis of variance (ANOVA) (p<0.01). 481 TDIs in 251 patients were examined at a private dental practice in Valencia. The population comprised 62.5% men and 37.5% women, aged 1 to 78 years. The highest frequency of tooth injuries occurred in children aged 9 years or younger. The most frequent injury was non-complicated crown fracture (43.2%). Upper central incisors were the most commonly affected teeth. The most frequent place where TDI was produced was in the street (28.7%), tripping over an immobile object being the most common cause (29%). Thanks to the protocol elaborated for the purposes of this work, it was possible to compile a large quantity of data on TDI, facilitating future prevention and comparison with other regions. The results obtained concur with those published in the literature

Bleaching in vital teeth : combined treatment vs in-office treatment

The aim of this study was to verify that there will be greater whitening in teeth treated with combined bleaching than in those that have been applied a clinical one and to evaluate the efficiency of the clinical treatment, those cases in which it is not able, or it is not wanted, to carry out the home phase. They were used 66 extracted anterior human teeth, which were divided into two study groups. On the one hand, the clinical group (ClG) consisted of 33 teeth, which were treated with a clinical guideline using 37.5% hydrogen peroxide in a single session of 4 applications of 8 minutes. On the other hand, the combinate group (CoG) consisted of 33 teeth, which were treated with a combined guideline, applying first a clinical treatment as in the ClG and, at home treatment with carbamide peroxide at 16% for 22 days, 90 minutes a day. The colour of the tooth was measured before and after each treatment and was made through an individualized whitening splint with a spectrophotometer. The 66 teeth were bleached, showing an increase in luminosity, a drecrease in yellow and a shift towards the green colours, where b (yellow-blue axis) was the only variable with a statistically significant change (p<0.001). The CoG obtained a significantly higher absolute value (p<0.001) than the ClG, being 12.99 for the first one and 19.70 for the second one. Combined therapy bleached more than clinical one, but both techniques were effective. In addition, it is affirmed that the clinical could be an alternative in those cases in which it is not able, or it is not wanted, to carry out the home phase

Radiographic technical quality of root canal treatment performed ex vivo by dental students at Valencia University Medical and Dental School, Spain

performed on extracted teeth by undergraduate dental students. Study Design: A total of 561 premolars and molars extracted teeth were prepared using nickel-titanium rotary files or manual instrumentation and filled with gutta-percha using a cold lateral condensation technique, by 4th grade undergraduate students. Periapical radiographs were used to assess the technical quality of the root canal filling, evaluating three variables: length, density and taper. These data were recorded, scored and used to study the "technical success rate" and the "overall score". The length of each root canal filling was classified as acceptable, short and overfilled, based on their relationship with the radiographic apex. Density and taper of filling were evaluated based on the presence of voids and the uniform tapering of the filling, respectively. Statistical analysis was used to evaluate the quality of root canal treatment, considering p < 0.05 as a statistical significant level. Results: The percentage of technical success was 44% and the overall score was 7.8 out of 10. Technical success and overall score were greater with rotary instruments (52% against 28% with a manual one, p < 0.001; 8.3 against 6.7 respectively, p < 0.001). Conclusions: It appears that inexperienced operators perform better root canal treatment (RCT) with the use of rotary instrumentation

An in vitro comparison of cyclic fatigue resistance of ProTaper universal and GT series X files

Objective : The aim of this study was to compare the cyclic fatigue resistance of two nickel-titanium (NiTi) endodontic instruments from ProTaper and GT series X files. Study Design: Cyclic fatigue test was realized with instruments from ProTaper: F1 and F3 (Denstply Maillefer, Ballaigues, Switzerland) and GT-X: 20.06 and 30.08 (Dentsply Tulsa Dental, Tulsa, Oklahoma, United States of America). A total of 320 instruments were rotated in 4 curved artificial canals with different angles and radius of curvature. The time and cycles to failure were calculated. The data was compared using a Mann-Whitney, Kruskall-Wallis, and Kolmogorov-Smirnov tests, with a significance level of p<0.05. Results: GT-X files rotated for a significantly longer period of time before separation occurred, thus GT-X files where more resistant to the cyclic fatigue compared with ProTaper. Conclusion : GT-X files have a greater resistance to cyclic fatigue, this fact can be caused by the use of the Ni-Ti alloy "M-Wire"

Treatment of multiple traumatized anterior teeth associated with an alveolar bone fracture in a 20-year-old patient: a 3-year follow up

Intrusive luxation is a type of recognizable luxation injury represented by a deeper axial displacement of the tooth toward the alveolar bone. Treatment strategies include waiting for the tooth to return to its position, immediate surgical repositioning, and repositioning through dental traction by orthodontic devices. The aim of this case report was to present the management of severe dental trauma and later restoration following IADT. A 20-year-old patient was presented after fainting at home four hours before, resulting in a dento-alveolar trauma. Clinical examinations revealed a traumatic intrusion, in 1.2, 1.1 and 2.1, uncomplicated crown fractures in 1.1 and 2.1 and a complicated crown-root fracture in 2.2. The diagnosis was confirmed with CBCT. Following IADT protocol, the emergency treatment consisted of the surgical repositioning and semi-rigid splinting using orthodontic wire-composite, repla - cing the buccal bone plate, and postoperative instructions to the patient regarding oral hygiene. After 2 weeks the root canal treated and filled with fiberglass posts in 1.2, 1.1, 2.1 and 2.2. Splint was removed after 4 weeks and the IADT reassessment protocol followed, with revisions at 6-8 weeks, 6 months, a year and annual reviews for 5 years. A year after the treatment, the traumatized teeth were restored with minimally invasive preparations of feldspathic ceramic. Esthetics and function were recorded with a 3-year follow-up period

An in vitro cyclic fatigue resistance comparison of conventional and new generation nickel-titanium rotary files

New designs and processing of Niquel-Titanium (NiTi) have been introduced to increase resistance to cyclic fatigue. The purpose of this study was to compare the cyclic fatigue resistance of 3 NiTi rotary instruments, ProTaper Next (PTN; Dentsply Maillefer, Ballaigues, Switzerland), Profile Vortex Blue (PVB; Dentsply Tulsa Dental, Tulsa, OK, USA) and ProTaper Universal (PTU; Dentsply Maillefer, Ballaigues, Switzerland). A cyclic fatigue test was conducted operating instruments from ProTaper Next X2, Profile Vortex Blue 25.06 and ProTaper F2. A total of 234 instruments were rotated in 2 simulated stainless steel curved canals with different angles of curvature (45º and 60°) and 5-mm radius of curvature. The number of cycles to fracture (NCF) was calculated. Data were compared using 2-way analysis of variance and post-hoc Bonferroni test in software (SPSS 15.0, Chicago, IL). Statistical significance was set at P<0.05. Profile Vortex Blue showed higher resistance to cyclic fatigue in both curved canals than ProTaper Next and ProTaper Universal (P<0.001). ProTaper Universal obtained the lowest resistance to cyclic fatigue in both canals (P<0.001). Profile Vortex Blue was the most resistant to cyclic fatigue failure, followed by ProTaper Next and ProTaper Universal. Anatomical complexity (angle of curvature) and manufacturing process of NiTi are important factors for resistance to cyclic fatigue