42 research outputs found
Structure-related bandgap of hybrid lead halide perovskites and close-packed APbX3 family of phases
Metal halide perovskites APbX3 (A+ = FA+ (formamidinium), MA+
(methylammonium) or Cs+, X- = I-, Br-) are considered as prominent innovative
components in nowadays perovskite solar cells. Crystallization of these
materials is often complicated by the formation of various phases with the same
stoichiometry but structural types deviating from perovskites such as
well-known the hexagonal delta FAPbI3 polytype. Such phases are rarely placed
in the focus of device engineering due to their unattractive optoelectronic
properties while they are, indeed, highly important because they influence on
the optoelectronic properties and efficiency of final devices. However, the
total number of such phases has not been yet discovered and the complete
configurational space of the polytypes and their band structures have not been
studied systematically. In this work, we predicted and described all possible
hexagonal polytypes of hybrid lead halides with the APbI3 composition using the
group theory approach, also we analyzed theoretically the relationship between
the configuration of close-packed layers in polytypes and their band gap using
DFT calculations. Two main factors affecting the bandgap were found including
the ratio of cubic (c) and hexagonal (h) close-packed layers and the thickness
of blocks of cubic layers in the structures. We also show that the dependence
of the band gap on the ratio of cubic (c) and hexagonal (h) layers in these
structures are non-linear. We believe that the presence of such polytypes in
the perovskite matrix might be a reason for a decrease in the charge carrier
mobility and therefore it would be an obstacle for efficient charge transport
causing negative consequences for the efficiency of solar cell devices
Protonation and Photocatalytic Activity of the Rb 2
The Rb2La2Ti3O10 layered oxide was synthesized by the solid-state method. Three phases with different protonation degrees and intercalated water contents were obtained from the initial compound by the treatment with distilled water and hydrochloric acid. The obtained samples were characterized by powder X-ray diffraction, SEM, X-ray microanalysis, BET, DRS, and TG. It was found that the complete ion exchange of Rb+ for H+ in the layered oxide Rb2La2Ti3O10 proceeds through the formation of two metastable intermediate phases with average protonation degrees of 0.5 and 0.75, which successively transform from one to another. Each of these phase transformations is accompanied not only by the contraction of the interlayer distance but also by the displacement of adjacent perovskite layers by 1/2 of the cell parameter which results in the change in the space group. The photocatalytic activity of obtained samples decreases with the increase in the protonation degree, which correlates with the decrease in the intercalated water content
AlGaAs/GaAs Quantum Well Infrared Photodetectors
In this article, we present an overview of a focal plane array (FPA) with 640 × 512 pixels based on the AlGaAs quantum well infrared photodetector (QWIP). The physical principles of the QWIP operation and their parameters for the spectral range of 8–10 μm have been discussed. The technology of the manufacturing FPA based on the QWIP structures with the pixels 384 × 288 and 640 × 512 has been demonstrated. The parameters of the manufactured 640 × 512 FPA with a step of 20 μm have been given. At the operating temperature of 72 K, the temperature resolution of QWIP focal plane arrays is less than 35 mK. The number of defective elements in the matrix does not exceed 0.5%. The stability and uniformity of the FPA have been demonstrated
Localization of the E. coli Dps protein molecules in a silicon wires under removal of residual salt
The work is related to the removal of residual salts in hybrid structures formed as a result of silicon wires arrays combining with a nanomaterial of natural origin – bacterial ferritin-like protein Dps. The study of the morphology and composition of the surface and the bulk part of the hybrid structure as a result of combination and subsequent washing in water was carried out.
The method of metal-assisted wet chemical etching was used to obtain silicon wires arrays. To obtain recombinant protein, Escherichia coli BL21*(DE3) cells with chromatographic purification were used as producers. The combination of silicon wires with protein molecules was carried out by layering them in laboratory conditions, followed by drying. The residual salt found earlier in the hybrid material was removed by washing in water. The resulting hybrid material was studied by scanning electron microscopy and X-ray photoelectron spectroscopy. A well-proven complementary combination of scanning electron microscopy and X-ray photoelectron spectroscopy together with ion etching was used to study the morphology of the hybrid material “silicon wires – bacterial protein Dps” and the composition with physico-chemical state respectively.
In arrays of silicon wires with a wire diameter of about 100 nm and a distance between them from submicron to nanometer sizes, protein was found as a result of layering and after treatment in water. At the same time, the amount of residual NaCl salt is minimized on the surface of the hybrid structure and in its volume.
The obtained data can be used in the development of coating technology for the silicon wires developed surface available for functionalization with controlled delivery of biohybrid materia
Magnetic quantum ratchet effect in (Cd,Mn)Te- and CdTe-based quantum well structures with a lateral asymmetric superlattice
We report on the observation of magnetic quantum ratchet effect in (Cd, Mn) Te-and CdTe-based quantum well structures with an asymmetric lateral dual grating gate superlattice subjected to an external magnetic field applied normal to the quantum well plane. A dc electric current excited by cw terahertz laser radiation shows 1/B oscillations with an amplitude much larger as compared to the photocurrent at zero magnetic field. We show that the photocurrent is caused by the combined action of a spatially periodic in-plane potential and the spatially modulated radiation due to the near-field effects of light diffraction. Magnitude and direction of the photocurrent are determined by the degree of the lateral asymmetry controlled by the variation of voltages applied to the individual gates. The observed magneto-oscillations with enhanced photocurrent amplitude result from Landau quantization and, for (Cd, Mn) Te at low temperatures, from the exchange enhanced Zeeman splitting in diluted magnetic heterostructures. Theoretical analysis, considering the magnetic quantum ratchet effect in the framework of semiclassical approach, describes quite well the experimental results
Study of exclusive one-pion and one-eta production using hadron and dielectron channels in pp reactions at kinetic beam energies of 1.25 GeV and 2.2 GeV with HADES
We present measurements of exclusive ensuremathπ+,0 and η production in pp reactions at 1.25GeV and 2.2GeV beam kinetic energy in hadron and dielectron channels. In the case of π+ and π0 , high-statistics invariant-mass and angular distributions are obtained within the HADES acceptance as well as acceptance-corrected distributions, which are compared to a resonance model. The sensitivity of the data to the yield and production angular distribution of Δ (1232) and higher-lying baryon resonances is shown, and an improved parameterization is proposed. The extracted cross-sections are of special interest in the case of pp → pp η , since controversial data exist at 2.0GeV; we find \ensuremathσ=0.142±0.022 mb. Using the dielectron channels, the π0 and η Dalitz decay signals are reconstructed with yields fully consistent with the hadronic channels. The electron invariant masses and acceptance-corrected helicity angle distributions are found in good agreement with model predictions
Determination of smoldering time and thermal characteristics of firebrands under laboratory conditions
The laboratory experiment was conducted to simulate the transfer of smouldering particles produced in forest wildfires by a heated gas flow. The pine bark pieces with the linear dimensions L=(15; 20; 30) mm and a thickness of h=(4−5) mm were selected as model particles. The rate and temperature of the incident flow varied in the range of 1–3 m/s and 80–85 °C, respectively. The temperature of the samples was recorded using a thermal imager. To determine the minimum smouldering temperature of pine bark, the thermal analysis was conducted. The minimum smouldering temperature of pine bark was found to be 190 °C. This temperature will cause thermal decomposition of bark only at the first stage (oxidation of resinous components). In the study the smouldering time, the temperature and the weight of samples were obtained and analyzed under various experimental conditions. The data analysis shows that the increase in the particle size leads to the decrease in their mass loss, and the rate change of the incident flow does not practically influence the mass change. For particles with the linear dimensions of 10 mm and 20 mm, the mass varies from 6% to 25%. The maximum mass loss is observed for the flows with a rate of 1 and 2 m/s. The results have shown that the increase in the particle size leads to the increase in the smouldering time. The position of the particle plays an important role, the effect of which increases with increasing the particle size. The calculations showed that the smouldering time of bark samples is long enough for the particles to serve as new sources of spot fires. The particles were found to be transported to a distance of 218 m from the fire line which can certainly influence the propagation of the fire front
Determination of smoldering time and thermal characteristics of firebrands under laboratory conditions
The laboratory experiment was conducted to simulate the transfer of smouldering particles produced in forest wildfires by a heated gas flow. The pine bark pieces with the linear dimensions L=(15; 20; 30) mm and a thickness of h=(4−5) mm were selected as model particles. The rate and temperature of the incident flow varied in the range of 1–3 m/s and 80–85 °C, respectively. The temperature of the samples was recorded using a thermal imager. To determine the minimum smouldering temperature of pine bark, the thermal analysis was conducted. The minimum smouldering temperature of pine bark was found to be 190 °C. This temperature will cause thermal decomposition of bark only at the first stage (oxidation of resinous components). In the study the smouldering time, the temperature and the weight of samples were obtained and analyzed under various experimental conditions. The data analysis shows that the increase in the particle size leads to the decrease in their mass loss, and the rate change of the incident flow does not practically influence the mass change. For particles with the linear dimensions of 10 mm and 20 mm, the mass varies from 6% to 25%. The maximum mass loss is observed for the flows with a rate of 1 and 2 m/s. The results have shown that the increase in the particle size leads to the increase in the smouldering time. The position of the particle plays an important role, the effect of which increases with increasing the particle size. The calculations showed that the smouldering time of bark samples is long enough for the particles to serve as new sources of spot fires. The particles were found to be transported to a distance of 218 m from the fire line which can certainly influence the propagation of the fire front
Solubility of Hybrid Halide Perovskites in DMF and DMSO
Solution methods remain the most popular means for the fabrication of hybrid halide perovskites. However, the solubility of hybrid perovskites has not yet been quantitively investigated. In this study, we present accurate solubility data for MAPbI3, FAPbI3, MAPbBr3 and FAPbBr3 in the two most widely used solvents, DMF and DMSO, and demonstrate huge differences in the solubility behavior depending on the solution compositions. By analyzing the donor numbers of the solvents and halide anions, we rationalize the differences in the solubility behavior of hybrid perovskites with various compositions, in order to take a step forward in the search for better processing conditions of hybrid perovskites for solar cells and optoelectronics