Review: The effect of different nanofiller materials on the thermoelectric behavior of bismuth telluride

This review paper summarizes and discusses the effect of nanosized fillers on bismuth telluride nanocomposites for thermoelectric applications. Classified into various dimensions based on electron confinement in space, the nanofiller effect on the figure-of-merit value is studied. By combining experimental data with theoretical models, the mechanisms for enhancing the thermoelectric properties were proposed. The outcomes of this review paper suggest that doped bismuth telluride composites (doped with selenium for n-type or antinomy for p-type) offer better thermoelectric properties compared to undoped composites. Moreover, improvements in undoped bismuth telluride composites are exclusive for the n-type only. The figure-of-merit value for bismuth telluride composites is less than two, where the 2D nanofillers show optimum ZT improvements. Nevertheless, the inconsistency of reported data in the thermoelectric area is a problem that must be addressed to have more control over the precision of the reported results for a better understanding of the concepts in this field.This work was supported by Grant no. NPRP10–0206–170366 from Qatar National Research Fund (a member of the Qatar Foundation). The statements made herein are solely the responsibility of the authors. Open access publication of this article was funded by the Qatar National Library

Experimental and modeling analysis of p-type Bi0.4Sb1.6Te3 and graphene nanocomposites

The state-of-the-art Bismuth-Telluride (Bi2Te3) based systems are promising thermoelectric materials for efficient thermoelectric applications. In this study, the effect of graphene nanosheets (GNS) integrity on thermoelectric properties of a p-type Bi0.4Sb1.6Te3 alloy has been studied using high-energy ball milling and SPS sintering techniques. The synthesized pristine Bi0.4Sb1.6Te3 and 0.05wt% GNS/Bi0.4Sb1.6Te3 nanocomposites at different addition times of GNS have exhibited a single-phase and artifact-free bulk nanocrystalline Bi0.4Sb1.6Te3 with nanocrystals size of 17 nm. The TEM analysis confirmed the mechanical exfoliation of graphene filler in 5m nanocomposite into a single-layered nanostructure with an interplanar spacing of 0.343 nm. The prominent Raman features of the monolayered graphene sheet have appeared in the synthesized 5m-GNS/Bi0.4Sb1.6Te3 nanocomposite. This highlighted the crucial rule of graphene addition time on its structure and morphology of the synthesized nanocomposites. The ZT profile of 5m nanocomposite reached 0.801 at 348 K till 398 K. This resulted in 65% of improvements to the pristine Bi0.4Sb1.6Te3 pellet at 323 K. The obtained results were used to simulate a thermoelectric (TE) device module using ANSYS Workbench. The GNS nanocomposites have shown an ultrahigh output power of 95.57 W compared to 89.96 W for the pristine module at ΔT of 150 °C. The GNS addition has increased the output power of pristine Bi0.4Sb1.6Te3 by 7%, leading to comparable TE performance to other simulated Bi2Te3 systems

The effects of structural integrity of graphene on the thermoelectric properties of the n-type bismuth-telluride alloy

This study examines the effects of the structural integrity of graphene on the thermoelectric properties of n-type bismuth telluride alloy. Graphene/Bi2Te2.7Se0.3 composites were prepared via mechanical alloying and spark plasma sintering techniques. Different graphene concentrations (0.05 and 0.5 wt%) and addition times (20 hrs, 10 mins, and 1 min) were considered. The thermoelectric properties were measured, and the results showed that the milling time affects graphene structure as well as its agglomeration. It is revealed that the optimum time to add the two-dimensional filler is during the last phase of mechanical milling as it will preserve graphene’s structure and boost the electrical conductivity. It is also shown that as the milling time of graphene increases, the Seebeck coefficient improves. Even though an increase in the thermal conductivity is expected due to the high electrical conductivity, a clear reduction in the lattice thermal conductivity part was obtained due to the increased scattering at the new interfaces. The figure-of-merit for the optimum sample with 0.05 wt% graphene added in the last 10 mins of milling had an improvement of 19% at room temperature reaching a value of 0.5, and 25% at 160 °C achieving a final value of 0.81.This work was made possible by Grant no. NPRP10-0206-170366 from Qatar National Research Fund (a member of the Qatar Foundation). The findings achieved herein are solely the responsibility of the authors. The authors also acknowledge the technical support from the Central Laboratory Unit (CLU) and the Center of Advanced Materials (CAM) at Qatar University. Open Access funding is provided by the Qatar National Librar

Thermoelectric behavior of Bi2Te2.55Se0.45 with a tunable seebeck coefficient: A comparison between coarse needle-like structure and bulk nanostructured alloys

In this study, we compare the thermoelectric properties of coarse-grained n-type Bi2Te2.55Se0.45 alloy prepared by induction melting with the bulk-nanostructured prepared by ball milling and hot-pressing techniques. The corresponding thermoelectric properties showed different behavior for each material processed using different routes. The most striking result of the study is observing a p-type behavior and charge carrier transition from p-to n-type for the coarse-grained alloy. These observed phenomena are related mainly to the unique needle-like microstructure accompanied by high lattice strain. Lastly, the obtained figure-of-merit values for the coarse needle-like structure and bulk nanostructured Bi2Te2.55Se0.45 alloys are 0.20 and 0.80 at their optimum temperatures of 60 and 120 °C, respectively

The effect of graphene on the activation energy of grain growth for the nanocrystalline thermoelectric n-type Bi2Te2.7Se0.3

Even though bismuth telluride is frequently produced by mechanical alloying for thermoelectric materials, no data has been published addressing the thermal behavior and activation energy of the milled n-type Bi2Te2.7Se0.3 powders. This paper studies the activation energy of grain growth for the nanocrystalline n-type Bi2Te2.7Se0.3 and two graphene-Bi2Te2.7Se0.3 composites with different graphene concentrations (0.05 and 0.5 wt.%). Grain size and structural analyses of these samples have been carried out using X-ray diffraction (XRD) and transmission electron microscopy (TEM). The thermal stability of the three samples is investigated by incorporating differential scanning calorimetry data with the Kissinger model. The activation energy of the pristine Bi2Te2.7Se0.3 alloy is found to be 268 kJ/mol. For the composite samples, a lower graphene weight percentage (0.05 wt.%) increased the activation energy to 270 kJ/mol. In contrast, higher amounts of graphene (0.5 wt.%) reduced the activation energy significantly to 254 kJ/mol. The observed effect is found to be directly related to graphene’s exfoliation in the bismuth telluride matrix. These results offer a better understanding of the thermal behavior of the nanocrystalline pristine n-type Bi2Te2.7Se0.3 and the influence of graphene nanofiller on the thermal stability of the bismuth telluride nanocomposites.Other Information Published in: Emergent Materials License: https://creativecommons.org/licenses/by/4.0See article on publisher's website: http://dx.doi.org/10.1007/s42247-022-00416-5</p