15 research outputs found
`THz Torch' technology: secure thermal infrared wireless communications using engineered blackbody radiation
The thermal (emitted) infrared frequency bands, from 20 to 40 THz and 60 to 100 THz, are best known for applications in thermography. This underused and unregulated part of the spectral range offers opportunities for the development of secure communications. The `THz Torch' concept, operating between the THz and mid-infrared ranges, was recently introduced. This technology fundamentally exploits engineered blackbody radiation, by partitioning thermally-generated spectral power into pre-defined frequency channels; the energy in each channel is then independently pulsed modulated to create a robust form of short-range secure communications in the far/mid-infrared. In the thesis, the development of `THz Torch' wireless communications systems will first be introduced. State-of-the-art THz technologies, infrared sources and detectors, as well as near-infrared and visible light communications technologies, will be reviewed in Chapter 2. Basic single-channel architecture of the `THz Torch' technology will be presented in Chapter 3. Fundamental limits for the first single-channel proof-of-concept demonstrator will be discussed, and possible engineering solutions will be proposed and verified experimentally. With such improvements, to date, octave bandwidth (25 to 50 THz) single-channel wireless links have been demonstrated with >2 kbit/s data rate and >10 cm transmission distance. To further increase the overall end-to-end data rate and/or the level of security, multiplexing schemes for `THz Torch' technologies are proposed in Chapter 4. Both frequency division multiplexing (FDM) and frequency-hopping spread-spectrum (FHSS) working demonstrators, operating between 10 and 100 THz spectral range, will be implemented. With such 4-channel multiplexing schemes, measured bit error rates (BERs) of <10â6 have been achieved over a transmission distance of 2.5 cm. Moreover, the integrity of such 4-channel multiplexing system is evaluated by introducing four jamming, interception and channel crosstalk experiments. Chapter 5 gives a detailed power link budget analysis for the 4-channel multiplexing system. The design, simulation and measurement of scalable THz metal mesh filters, which have potential applications for multi-channel `THz Torch' technology, will be presented in Chapter 6. The conclusions and further work are summarised in the last chapter. It is expected that this thermodynamics-based approach represents a new paradigm in the sense that 19th century physics can be exploited with 20th century multiplexing concepts for low cost 21st century ubiquitous security and defence applications in the thermal infrared range.Open Acces
Ultra-wideband THz/IR Metamaterial Absorber based on Doped Silicon
Metamaterial-based absorbers have been extensively investigated in the
terahertz (THz) range with ever increasing performances. In this paper, we
propose an all-dielectric THz absorber based on doped silicon. The unit cell
consists of a silicon cross resonator with an internal cross-shaped air cavity.
Numerical results suggest that the proposed absorber can operate from THz to
mid-infrared, having an average power absorption of >95% between 0.6 and 10
THz. Experimental results using THz time-domain spectroscopy show a good
agreement with simulations. The underlying mechanisms for broadband absorptions
are attributed to the combined effects of multiple cavities modes formed by
silicon resonators and bulk absorption in the substrate, as confirmed by
simulated field patterns. This ultra-wideband absorption is polarization
insensitive and can operate across a wide range of the incident angle. The
proposed absorber can be readily integrated into silicon-based platforms and is
expected to be used in sensing, imaging, energy harvesting and wireless
communications systems.Comment: 6 pages, 5 figure
A Highly Stable and Sensitive MEMS-based Gravimeter for Long-term Earth Tides Observations
Precision measurements of local gravitational acceleration variations are of great importance in geophysical surveys. With advantages such as cost-effectiveness and portability, Micro-Electro-Mechanical system (MEMS)-based gravimeters have shown the potential for long-term gravity measurements. In this paper, aiming to further improve the stability of the instrument, the design considerations and system evaluations of a MEMS gravimeter are presented. With a linear spring design for the silicon proof-mass, a low natural frequency of ~14 Hz and a large linear range of ~10300 mGal are achieved with an ultra-low self-noise floor of 1.2 ÎŒGal/âHz@1 Hz. By implementing a vacuum chamber system, the pressure variation is reduced from hundreds of Pa/day in atmosphere to a linear variation of ~6 Pa/day. In addition, an active temperature control system can suppress temperature fluctuations by 2 to 3 orders of magnitude within the band from 1Ă10 -4 Hz to 1Ă10 -2 Hz. The stability of the proposed MEMS gravimeter is demonstrated via long-term Earth tides observations within a 30-day time span, giving a correlation coefficient of 0.957 with the reference. An excellent bias instability of â€4 ÎŒGal is demonstrated within the 8-3000 s averaging time range, representing one of the best performances to date in terms of stability for MEMS gravimeters. This shows the potential of high-performance MEMS gravimeters for petroleum and mineral prospecting, seismology and other geophysical applications
Supplementary document for Modified rigorous coupled-wave analysis for multi-layer deformable gratings with arbitrary profiles and materials - 6111619.pdf
Supplemental Document final versio
Scale Factor Calibration for a Rotating Accelerometer Gravity Gradiometer
Rotating Accelerometer Gravity Gradiometers (RAGGs) play a significant role in applications such as resource exploration and gravity aided navigation. Scale factor calibration is an essential procedure for RAGG instruments before being used. In this paper, we propose a calibration system for a gravity gradiometer to obtain the scale factor effectively, even when there are mass disturbance surroundings. In this system, four metal spring-based accelerometers with a good consistency are orthogonally assembled onto a rotary table to measure the spatial variation of the gravity gradient. By changing the approaching pattern of the reference gravity gradient excitation object, the calibration results are generated. Experimental results show that the proposed method can efficiently and repetitively detect a gravity gradient excitation mass weighing 260 kg within a range of 1.6 m and the scale factor of RAGG can be obtained as (5.4 ± 0.2) E/μV, which is consistent with the theoretical simulation. Error analyses reveal that the performance of the proposed calibration scheme is mainly limited by positioning error of the excitation and can be improved by applying higher accuracy position rails. Furthermore, the RAGG is expected to perform more efficiently and reliably in field tests in the future
Temperature Gradient Method for Alleviating Bonding-Induced Warpage in a High-Precision Capacitive MEMS Accelerometer
Capacitive MEMS accelerometers with area-variable periodic-electrode displacement transducers found wide applications in disaster monitoring, resource exploration and inertial navigation. The bonding-induced warpage, due to the difference in the coefficients of thermal expansion of the bonded slices, has a negative influence on the precise control of the interelectrode spacing that is essential to the sensitivity of accelerometers. In this work, we propose the theory, simulation and experiment of a method that can alleviate both the stress and the warpage by applying different bonding temperature on the bonded slices. A quasi-zero warpage is achieved experimentally, proving the feasibility of the method. As a benefit of the flat surface, the spacing of the capacitive displacement transducer can be precisely controlled, improving the self-noise of the accelerometer to 6 ng/√Hz @0.07 Hz, which is about two times lower than that of the accelerometer using a uniform-temperature bonding process
Low Temperature Hydrophilic SiC Wafer Level Direct Bonding for Ultrahigh-Voltage Device Applications
SiC direct bonding using O2 plasma activation is investigated in this work. SiC substrate and n− SiC epitaxy growth layer are activated with an optimized duration of 60s and power of the oxygen ion beam source at 20 W. After O2 plasma activation, both the SiC substrate and n− SiC epitaxy growth layer present a sufficient hydrophilic surface for bonding. The two 4-inch wafers are prebonded at room temperature followed by an annealing process in an atmospheric N2 ambient for 3 h at 300 °C. The scanning results obtained by C-mode scanning acoustic microscopy (C-SAM) shows a high bonding uniformity. The bonding strength of 1473 mJ/m2 is achieved. The bonding mechanisms are investigated through interface analysis by transmission electron microscopy (TEM) and energy dispersive X-ray spectroscopy (EDX). Oxygen is found between the two interfaces, which indicates Si–O and C–O are formed at the bonding interface. However, a C-rich area is also detected at the bonding interface, which reveals the formation of C-C bonds in the activated SiC surface layer. These results show the potential of low cost and efficient surface activation method for SiC direct bonding for ultrahigh-voltage devices applications
Thalidomide-induced serious RR interval prolongation (longest interval >5.0âs) in multiple myeloma patient with rectal cancer: A case report
Primary secondary tumor increased recently with the use of immunomodulatory drugs in patients with multiple myeloma (MM). However, MM with prior diagnosis of primary secondary tumor is relatively rare. In this study, we reported an MM patient with prior diagnosis of rectal cancer. In brief, an 85-year-old man was first diagnosed with rectal cancer. Given the age, heart failure and small-cell hypochromic anemia (hemoglobin level: 54âg/L), rectal cancer resection was not advised and symptomatic treatments were performed (including sufficient iron supplementation). Eight months later, the patient was diagnosed with MM due to worsening anemia. Anemia and heart failure were corrected after three cycles of treatment with thalidomide, dexamethasone and capecitabine. Radical resection of rectal carcinoma (Hartmann) was finally performed due to acute abdominal distension. Meanwhile, RR interval prolongation (longest interval >5.0âs) and atrial fibrillation occurred in the fifth cycle treatment. One month after discontinuation of thalidomide, RR interval returned to normal range, while atrial fibrillation developed into persistent atrial fibrillation
Flexible ultra-wideband terahertz absorber based on vertically aligned carbon nanotubes
Ultra-wideband absorbers have been extensively used in wireless communications, energy harvesting, and stealth applications. Herein, with the combination of experimental and theoretical analyses, we develop a flexible ultra-wideband terahertz absorber based on vertically aligned carbon nanotubes (VACNTs). Measured results show that the proposed absorber is able to work efficiently within the entire THz region (e.g., 0.1â3.0 THz), with an average power absorptance of >98% at normal incidence. The absorption performance remains at a similar level over a wide range of incident angle up to 60°. More importantly, our devices can function normally, even after being bent up to 90° or after 300 bending cycles. The total thickness of the device is about 360 ÎŒm, which is only 1/8 of the wavelength for the lowest evaluated frequency of 0.1 THz. The new insight into the VACNT materials paves the way for applications such as radar cross-section reduction, electromagnetic interference shielding, and flexible sensing because of the simplicity, flexibility, ultra-wideband operation, and large-scale fabrication of the device.Accepted versionThis work was partially supported by the National Key R&D Program of China (grant no. 2018YFC0603301), and the National Natural Science Foundation of China (grant nos. 61801185, 51902112)
A Flexible and UltraâWideband Terahertz Wave Absorber Based on PyramidâShaped Carbon Nanotube Array via FemtosecondâLaser Microprocessing and TwoâStep Transfer Technique
Abstract High and uniform absorption capabilities of terahertz (THz) waves in an ultraâbroadband range is desirable for many THz functional devices. Nowadays, it is still challenging to fabricate flexible THz absorbers with a uniformly high absorptance across the entire THz band merely based on traditional bulk materials. Engineered metamaterials absorbers utilize impedance matching to reduce the surface reflection at a single frequency, and can achieve nearâunity power absorption within a relatively narrow bandwidth. In this work, a fabrication strategy combining a femtosecondâlaser microprocessing process and a twoâstepâtransfer technique is demonstrated for the realization of verticallyâaligned carbon nanotube (VACNT) arrays with pyramidâshaped unit cells for THz wave absorptions. To transfer the structured VACNT array from the silicon to the flexible PDMS/Cu/PET substrate, the temperature and pressure dependences of the transfer process are systematically investigated. The fabricated THz absorber demonstrates an average power absorptance over 98.9% from 0.1 to 2.5 THz, and can function well in bended states and after 300 times bending cycles. The proposed fabrication strategy is expected to be used for the patterning of VACNTs and other nanomaterials, and advance the development of novel THz devices for various applications