5,795 research outputs found
Sliding stability analysis of a retaining wall constructed by soilbags
Model tests were conducted to analyse the sliding stability of a retaining wall constructed by soilbags. The aim was to obtain an equation that calculates the active resultant earth pressure of sand acting on the wall in the ultimate state. Additionally, shear tests on multi-layers of vertically stacked soilbags were designed to investigate how the interlayer friction resistance varied with the height of the wall. The results show that the active earth pressure acting on the soilbag-constructed retaining wall in the ultimate state is non-linear, but it can be calculated from the force equilibrium of a differential element. The interlayer friction resistance of soilbags is found to be related to the shape of the sliding surface. Based on the obtained equation and the unique shear test results, the sliding stability of the retaining wall constructed by soilbags could be appropriately analyse
Additive manufacturing technology and its implementation in construction as an eco-innovative solution
Additive manufacturing (AM) of construction materials has been one of the emerging advanced technologies that aim to minimise the supply chain in the construction industry through autonomous production of building
components directly from digital models without human intervention and complicated formworks. However, technical challenges needs to be addressed for the industrial implementation of AM, e.g. materials formulation
standardization, and interfacial bonding quality between the deposited layers amongst others. AM as one of the
most highlighted key enabling technologies has the potential to create disruptive solutions, the key for its
successful implementation is multidisciplinary effort in synergy involving materials science, architecture/design,
computation, and robotics. There are crucial links between the material design formulations and the printing
system for the manufacturing of the complex 3D geometries. Understanding and optimising the mix design for
fresh rheology of materials and sufficient adhesion/cohesion of interface can allow the incorporation of complexity in the geometry
Design of a pulse power supply unit for micro-ECM
Electrochemical micro-machining (μECM) requires a particular pulse power supply unit (PSU) to be developed in order to achieve desired machining performance. This paper summarises the development of a pulse PSU meeting the requirements of μECM. The pulse power supply provides tens of nanosecond pulse duration, positive and negative bias voltages and a polarity switching functionality. It fulfils the needs for tool preparation with reversed pulsed ECM on the machine. Moreover, the PSU is equipped with an ultrafast overcurrent protection which prevents the tool electrode from being damaged in case of short circuits. The developed pulse PSU was used to fabricate micro-tools out of 170 μm WC-Co alloy shafts via micro-electrochemical turning and drill deep holes via μECM in a disk made of 18NiCr6. The electrolyte used for both processes was a mixture of sulphuric acid and NaNO3 aqueous solutions.The research reported in this paper is supported by the European Commission within the project “Minimizing Defects in Micro-Manufacturing Applications (MIDEMMA)” (FP7-2011-NMP-ICT-FoF-285614
Impact of neoadjuvant treatment on total mesorectal excision for ultra-low rectal cancers
<p>Abstract</p> <p>Background</p> <p>This study reviewed the impact of pre-operative chemoradiotherapy or post-operative chemotherapy and/or radiotherapy on total mesorectal excision (TME) for ultralow rectal cancers that required either low anterior resection with peranal coloanal anastomosis or abdomino-perineal resection (APR). We examined surgical complications, local recurrence and survival.</p> <p>Methods</p> <p>Of the 1270 patients who underwent radical resection for rectal cancer from 1994 till 2007, 180 with tumors within 4 cm with either peranal coloanal anastomosis or APR were analyzed. Patients were compared in groups that had surgery only (Group A), pre-operative chemoradiotherapy (Group B), and post-operative therapy (Group C).</p> <p>Results</p> <p>There were 115 males and the mean age was 65.43 years (range 30-89). APR was performed in 134 patients while 46 had a sphincter-preserving resection with peranal coloanal anastomosis. The mean follow-up period was 52.98 months (range: 0.57 to 178.9). There were 69, 58 and 53 patients in Groups A, B, and C, respectively. Nine patients in Group B could go on to have sphincter-saving rectal resection. The overall peri-operative complication rate was 43.4% in Group A vs. 29.3% in Group B vs. 39.6% in Group C, respectively. The local recurrence rate was significantly lower in Group B (8.6.9% vs. 21.7% in Group A vs. 33.9% in Group C) <it>p < 0.05</it>. The 5-year cancer-specific survival rates for Group A was 49.3%, Group B was 69.9% and Group C was 38.8% (<it>p </it>= 0.14).</p> <p>Conclusion</p> <p>Pre-operative chemoradiation in low rectal cancer is not associated with a higher incidence of peri-operative complications and its benefits may include reduction local recurrence.</p
A Spin - 3/2 Ising Model on a Square Lattice
The spin - 3/2 Ising model on a square lattice is investigated. It is shown
that this model is reducible to an eight - vertex model on a surface in the
parameter space spanned by coupling constants J, K, L and M. It is shown that
this model is equivalent to an exactly solvable free fermion model along two
lines in the parameter space.Comment: LaTeX, 7 pages, 1 figure upon request; JETP Letters, in pres
Power monitoring in a feedforward photonic network using two output detectors
Programmable feedforward photonic meshes of Mach-Zehnder interferometers are computational optical circuits that have many classical and quantum computing applications including machine learning, sensing, and telecommunications. Such devices can form the basis of energy-efficient photonic neural networks, which solve complex tasks using photonics-accelerated matrix multiplication on a chip, and which may require calibration and training mechanisms. Such training can benefit from internal optical power monitoring and physical gradient measurement for optimizing controllable phase shifts to maximize some task merit function. Here, we design and experimentally verify a new architecture capable of power monitoring any waveguide segment in a feedforward photonic circuit. Our scheme is experimentally realized by modulating phase shifters in a 6 x 6 triangular mesh silicon photonic chip, which can non-invasively (i.e., without any internal "power taps ") resolve optical powers in a 3 x 3 triangular mesh based on response measurements in only two output detectors. We measure roughly 3% average error over 1000 trials in the presence of systematic manufacturing and environmental drift errors and verify scalability of our procedure to more modes via simulation
Recommended from our members
Grain refinement of Mg-alloys by native MgO particles: An overview
A fine and equiaxed solidification process delivers multidimensional benefits to Mg-alloys, such as improved castability, reduced casting defects, enhanced mechanical properties, increased corrosion resistance and potential for increased recycled contents. Despite extensive research on grain refinement of Mg-alloys in the last few decades, currently, there is no effective grain refiner available for refining Mg-Al alloys, and our current understanding of grain refining mechanisms is not adequate to facilitate the development of effective grain refiners. Under the EPSRC (UK) LiME Hub's research program, substantial advances have been made in understanding the early stages of solidification covering prenucleation, heterogeneous nucleation, grain initiation and grain refinement. In this paper, we provide a comprehensive overview of grain refinement of Mg-alloys by native MgO particles. We show that native MgO particles can be made available for effective grain refinement of Mg-alloys by intensive melt shearing regardless of the alloy compositions. More importantly, we demonstrate that (1) the addition of more potent exogenous particles will not be more effective than native MgO; and (2) MgO particles are difficult to be made more impotent for grain refinement through promoting explosive grain initiation. We suggest that the most effective approach to grain refinement of Mg-alloys is to make more native MgO particles available for grain refinement through dispersion, such as by intensive melt shearing.EPSRC (UK) under grant number EP/N007638/1 is gratefully acknowledged
Segregation of Ca at the Mg/MgO interface and its effect on grain refinement of Mg alloys
It has been reported that native MgO particles in Mg alloy melts can act as heterogeneous nucleation substrates such that grain refinement of Mg alloys is achieved. A recent study showed the addition of Ca, combined with the native MgO particles, significantly improves grain refinement of Mg and its alloys. However, the mechanism underlying the grain refining phenomenon is not well understood due to the lack of direct experimental evidence. In this work, we investigated the segregation of Ca atoms at the Mg/MgO interface and its effect on grain refinement in Mg-0.5Ca alloys by utilizing advanced analytical electron microscopy. The experimental results focus on the chemical and structural information at the interface between MgO and the Ca solute. Adsorption layers rich in Al, N and Ca have been detected on {1 1 1} facets of MgO particles, with the lattice structure resembling the structure of MgO. It is suggested that the significant grain refinement improvement can be attributed not only to the growth restriction due to the presence of Ca addition but also to the specific chemistry and structure of the adsorption layers.EPSRC is gratefully acknowledged for financial support under grant number EP/N007638 /1. The SuperSTEM Laboratory is the U.K National Research Facility for Advanced Electron Microscopy, supported by EPSRC. SHW gratefully acknowledges the China Scholarship Council (CSC) for financial support
Recommended from our members
Novel and simple patterning process of quantum dots via transfer printing for active matrix qd-led
© 2020 SID. The next generation of a self-emitting display requires precise and stable patterning techniques to shape Red, Green, and Blue pixels using quantum dots. In this study, we propose the novel and simple transfer printing process for the active matrix QD-LEDs
Recommended from our members
Development of highly efficient, renewable and durable alginate composite aerogels for oil/water separation
Supplementary Movie S1 is available online at https://www.sciencedirect.com/science/article/pii/S0257897220302206?via%3Dihub#ac0005:~:text=Download%20all-,Supplementary%20Movie%20S1,-Supplemtantary%20information%20for .Supplementary information is available online at https://www.sciencedirect.com/science/article/pii/S0257897220302206?via%3Dihub#ec0010 .To valorize the naturally abundant biomass, bio-composites made of biomass and functional nano-materials have attracted a great deal of attention. By incorporating alginate with TiO2/RGO nanocomposites, TiO2/RGO/Alginate composite (TRGA) aerogels are fabricated via a facile freeze-drying method. TiO2/RGO nanocomposites can effectively improve the surface roughness and mechanical performance of alginate-based matrix, and provide the aerogels with light-driven self-cleaning ability. Without further chemical modification, the as-fabricated TRGA aerogel shows: i) collective underwater superoleophobicity (θoil > 150° for various oils), ii) effective oil/water separation performance (9.76 L·m−2·s−1 water permeate flux and 99.96% separation efficiency) and iii) excellent light-induced recyclability. With light-driven self-cleaning ability, the continuously deteriorated separation performance of aerogel can be easily renewed, and maintain an effective oil/water separation performance even after 120 cycles. Benefiting from its facile fabrication and excellent properties, the developed aerogel can be a promising candidate for practical oil/water separation in marine oil spill clean-up applications.This work is financially supported by the Program for New Century Excellent Talents in Fujian Province University (NCETFJ); Natural Science Foundation of Fujian Province (No. 2016J01207); Youth Education and Scientific of Fujian Province (No. JAT170154); and Outstanding Youth Fund of Fujian Agriculture and Forestry University (No. XJQ201419, CXZX2017292)
- …