A two-year randomized clinical trial of chlorhexidine varnish on dental caries in Chinese preschool children

The objective of this study was to assess the effect of six-monthly professional applications of chlorhexidine varnish on the prevention of dental caries in primary molars in Chinese preschool children. In a double-blinded, randomized, placebo-controlled clinical trial, 334 children aged 4-5 years were randomly divided into two groups. Children in the test group received six-monthly applications of a 40% chlorhexidine varnish, and the control children received a placebo varnish. Caries status of the children was assessed by two calibrated examiners at baseline and after 24 months, according to criteria recommended by the World Health Organization. The two-year mean caries increments in the test and the control group children were 1.0 and 1.6 decayed, missing, or filled molar surfaces (dmfs-molar), respectively, a 37.3% reduction (t test, p = 0.036). No side-effects were found. It was concluded that six-monthly applications of chlorhexidine varnish were effective in reducing the incidence of dental caries in primary molars.published_or_final_versio

A comparison of track model formulations for simulation of dynamic vehicle–track interaction in switches and crossings

This paper compares different track model formulations for the simulation of dynamic vehicle–track interaction in switches and crossings (S&C, turnouts) in a multi-body simulation (MBS) environment. The investigations are an extension of the S&C simulation Benchmark with the addition of a finite element model of a 60E1-760-1:15 turnout. This model constitutes a common reference from which four different track formulations are derived: co-running, modal superposition, finite element incorporated into the MBS model and finite element coupled to MBS using a co-simulation approach. For the different track models, the difference in modelling technique, results, simulation time, and suitability for different simulation tasks is compared. A good agreement is found between the different track model formulations for wheel–rail contact forces and rail displacements. This study found a better agreement between co-running and structural track models compared to previous studies in the prediction of wheel–rail contact forces. This appears to be due to the increased complexity of co-running track model used in this study together with a tuning of the co-running track model to the reference model in a wider frequency range. For the reader interested to reproduce the results in this paper, the reference track model is available for download

Bioassay-guided isolation and identification of antimicrobial compounds from thyme essential oil by means of overpressured layer chromatography, bioautography and GC-MS

A simple method is described for efficient isolation of compounds having an antibacterial effect. Two thyme (Thymus vulgaris) essential oils, obtained from the market, were chosen as prospective materials likely to feature several bioactive components when examined by thin layer chromatography coupled with direct bioautography as a screening method. The newly developed infusion overpressured layer chromatographic separation method coupled with direct bioautography assured that only the active components were isolated by means of overrun overpressured layer chromatography with online detection and fractionation. Each of the 5 collected fractions represented one of the five antimicrobial essential oil components designated at the screening. The purity and the activity of the fractions were confirmed with chromatography coupled various detection methods (UV, vanillin-sulphuric acid reagent, direct bioautography). The antibacterial components were identified with GC-MS as thymol, carvacrol, linalool, diethylphthalate, and alpha-terpineol. The oil component diethyl-phthalate is an artificial compound, used as plasticizer or detergent bases in the industry. Our results support that exploiting its flexibility and the possible hyphenations, overpressured layer chromatography is especially attractive for isolation of antimicrobial components from various matrixes

Design of a pulse power supply unit for micro-ECM

Electrochemical micro-machining (μECM) requires a particular pulse power supply unit (PSU) to be developed in order to achieve desired machining performance. This paper summarises the development of a pulse PSU meeting the requirements of μECM. The pulse power supply provides tens of nanosecond pulse duration, positive and negative bias voltages and a polarity switching functionality. It fulfils the needs for tool preparation with reversed pulsed ECM on the machine. Moreover, the PSU is equipped with an ultrafast overcurrent protection which prevents the tool electrode from being damaged in case of short circuits. The developed pulse PSU was used to fabricate micro-tools out of 170 μm WC-Co alloy shafts via micro-electrochemical turning and drill deep holes via μECM in a disk made of 18NiCr6. The electrolyte used for both processes was a mixture of sulphuric acid and NaNO3 aqueous solutions.The research reported in this paper is supported by the European Commission within the project “Minimizing Defects in Micro-Manufacturing Applications (MIDEMMA)” (FP7-2011-NMP-ICT-FoF-285614

Design of an electrochemical micromachining machine

Electrochemical micromachining (μECM) is a non-conventional machining process based on the phenomenon of electrolysis. μECM became an attractive area of research due to the fact that this process does not create any defective layer after machining and that there is a growing demand for better surface integrity on different micro applications including microfluidics systems, stress-free drilled holes in automotive and aerospace manufacturing with complex shapes, etc. This work presents the design of a next generation μECM machine for the automotive, aerospace, medical and metrology sectors. It has three axes of motion (X, Y, Z) and a spindle allowing the tool-electrode to rotate during machining. The linear slides for each axis use air bearings with linear DC brushless motors and 2-nm resolution encoders for ultra precise motion. The control system is based on the Power PMAC motion controller from Delta Tau. The electrolyte tank is located at the rear of the machine and allows the electrolyte to be changed quickly. This machine features two process control algorithms: fuzzy logic control and adaptive feed rate. A self-developed pulse generator has been mounted and interfaced with the machine and a wire ECM grinding device has been added. The pulse generator has the possibility to reverse the pulse polarity for on-line tool fabrication.The research reported in this paper is supported by the European Commission within the project “Minimizing Defects in Micro-Manufacturing Applications (MIDEMMA)” (FP7-2011-NMPICT- FoF-285614)

Mapping Exoplanets

The varied surfaces and atmospheres of planets make them interesting places to live, explore, and study from afar. Unfortunately, the great distance to exoplanets makes it impossible to resolve their disk with current or near-term technology. It is still possible, however, to deduce spatial inhomogeneities in exoplanets provided that different regions are visible at different times---this can be due to rotation, orbital motion, and occultations by a star, planet, or moon. Astronomers have so far constructed maps of thermal emission and albedo for short period giant planets. These maps constrain atmospheric dynamics and cloud patterns in exotic atmospheres. In the future, exo-cartography could yield surface maps of terrestrial planets, hinting at the geophysical and geochemical processes that shape them.Comment: Updated chapter for Handbook of Exoplanets, eds. Deeg & Belmonte. 17 pages, including 6 figures and 4 pages of reference

Formation of Supermassive Black Holes

Evidence shows that massive black holes reside in most local galaxies. Studies have also established a number of relations between the MBH mass and properties of the host galaxy such as bulge mass and velocity dispersion. These results suggest that central MBHs, while much less massive than the host (~ 0.1%), are linked to the evolution of galactic structure. In hierarchical cosmologies, a single big galaxy today can be traced back to the stage when it was split up in hundreds of smaller components. Did MBH seeds form with the same efficiency in small proto-galaxies, or did their formation had to await the buildup of substantial galaxies with deeper potential wells? I briefly review here some of the physical processes that are conducive to the evolution of the massive black hole population. I will discuss black hole formation processes for `seed' black holes that are likely to place at early cosmic epochs, and possible observational tests of these scenarios.Comment: To appear in The Astronomy and Astrophysics Review. The final publication is available at http://www.springerlink.co

Rates of asthma attacks in patients with previously inadequately controlled mild asthma treated in clinical practice with combination drug therapy: an exploratory post-hoc analysis

<p>Abstract</p> <p>Background</p> <p>Differences could exist in the likelihood of asthma attacks in patients treated with inhaled corticosteroid (ICS), long-acting beta-agonist (LABA), and montelukast (MON) (ICS/LABA/MON) and patients treated with an inhaled corticosteroid (ICS) and montelukast (MON) (ICS/MON).</p> <p>Methods</p> <p>This was a post-hoc analysis of a pretest-posttest retrospective cohort study. Patients with mild persistent asthma and allergic rhinitis, who were taking an ICS either alone or in combination with a LABA, started concomitant MON treatment as part of their routine care. Rates of asthma- and allergic rhinitis-related medical resource use in the 12-months after the initial (index) MON prescription were compared in the ICS/MON and ICS/LABA/MON groups. An asthma attack was defined as an asthma-related hospitalization, ER visit, or use of an oral corticosteroid.</p> <p>Results</p> <p>Of the total of 344 patients, 181 (53%) received ICS/MON and 163 (47%) received ICS/LABA/MON in the post-index period for means of 10.5 and 11.4 months, respectively, (P < 0.05). Short-acting beta-agonists were used by 74.6% in the ICS/MON and 71.8% in the ICS/LABA/MON groups (P > 0.05). An asthma attack occurred in 4.4% of the ICS/MON group and 6.8% of the ICS/LABA/MON group (P > 0.05). The adjusted odds of an asthma attack in the post-index period in the ICS/LABA/MON group relative to the ICS/MON group was 1.24, 95% confidence interval 0.35–4.44.</p> <p>Conclusion</p> <p>In this observational study of combination drug treatment of mild persistent asthma and allergic rhinitis, no difference was observed between LABA/ICS/MON combination therapy and the ICS/MON combination without LABA use, for the rate of asthma attacks over one year.</p