Start to end simulations of the ERL prototype at Daresbury Laboratory

Daresbury Laboratory is currently building an Energy Recovery Linac Prototype (ERLP) that will serve as a research and development facility for the study of beam dynamics and accelerator technology important to the design and construction of the proposed 4th Generation Light Source (4GLS) project. Two major objectives of the ERLP are the demonstration of energy recovery and of energy recovery from a beam disrupted by an FEL interaction as supplied by an infrared oscillator system. In this paper we present start-to-end simulations of the ERLP including such an FEL interaction. The beam dynamics in the highbrightness injector, which consists of a DC photocathode Gun and a superconducting booster, have been modelled using the particle tracking code ASTRA. After the booster the particles have been tracked with the code elegant. The 3D code GENESIS 1.3 was used to model the FEL interaction with the electron beam at 35 MeV. A brief summary of impedance and wakefield calculations for the whole machine is also given

A Universal Method to Generate Hyperpolarisation in Beams and Samples

Sizable hyperpolarisation, i.e. an imbalance of the occupation numbers of nuclear spins in a sample deviating from thermal equilibrium, is needed in various fields of science. For example, hyperpolarised tracers are utilised in magnetic resonance imaging in medicine (MRI) and polarised beams and targets are employed in nuclear physics to study the spin dependence of nuclear forces. Here we show that the quantum interference of transitions induced by radio-wave pumping with longitudinal and radial pulses are able to produce large polarisations at small magnetic fields. This method is easier than established methods, theoretically understood and experimentally proven for beams of metastable hydrogen atoms in the keV energy range. It should also work for a variety of samples at rest. Thus, this technique opens the door for a new generation of polarised tracers, possibly low-field MRI with better spatial resolution or the production of polarised fuel to increase the efficiency of fusion reactors by manipulating the involved cross sections.Comment: 22 pages, 9 figures, splitted into two parts: main paper and method

Multi-dimensional free-electron laser simulation codes : a comparison study.

A self-amplified spontaneous emission (SASE) free-electron laser (FEL) is under construction at the Advanced Photon Source (APS). Five FEL simulation codes were used in the design phase: GENESIS, GINGER, MEDUSA, RON, and TDA3D. Initial comparisons between each of these independent formulations show good agreement for the parameters of the APS SASE FEL

First Observation of Self-Amplified Spontaneous Emission in a Free-Electron Laser at 109 nm Wavelength

We present the first observation of Self-Amplified Spontaneous Emission (SASE) in a free-electron laser (FEL) in the Vacuum Ultraviolet regime at 109 nm wavelength (11 eV). The observed free-electron laser gain (approx. 3000) and the radiation characteristics, such as dependency on bunch charge, angular distribution, spectral width and intensity fluctuations all corroborate the existing models for SASE FELs.Comment: 6 pages including 6 figures; e-mail: [email protected]

Damage accumulation in thin ruthenium films induced by repetitive exposure to femtosecond XUV pulses below the single shot ablation threshold

The process of damage accumulation in thin ruthenium films exposed to multiple femtosecond XUV free electron laser FEL pulses below the critical angle of reflectance at the Free electron LASer facility in Hamburg FLASH was experimentally analyzed. The multi shot damage threshold is found to be lower than single shot damage threshold. Detailed analysis of the damage morphology and its dependence on irradiation conditions justifies the assumption that cavitation induced by the FEL pulse is the prime mechanism responsible for multi shot damage in optical coating

Biomineralisation by earthworms: an investigation into the stability and distribution of amorphous calcium carbonate

Background Many biominerals form from amorphous calcium carbonate (ACC), but this phase is highly unstable when synthesised in its pure form inorganically. Several species of earthworm secrete calcium carbonate granules which contain highly stable ACC. We analysed the milky fluid from which granules form and solid granules for amino acid (by liquid chromatography) and functional group (by Fourier transform infrared (FTIR) spectroscopy) compositions. Granule elemental composition was determined using inductively coupled plasma-optical emission spectroscopy (ICP-OES) and electron microprobe analysis (EMPA). Mass of ACC present in solid granules was quantified using FTIR and compared to granule elemental and amino acid compositions. Bulk analysis of granules was of powdered bulk material. Spatially resolved analysis was of thin sections of granules using synchrotron-based μ-FTIR and EMPA electron microprobe analysis. Results The milky fluid from which granules form is amino acid-rich (≤ 136 ± 3 nmol mg−1 (n = 3; ± std dev) per individual amino acid); the CaCO3 phase present is ACC. Even four years after production, granules contain ACC. No correlation exists between mass of ACC present and granule elemental composition. Granule amino acid concentrations correlate well with ACC content (r ≥ 0.7, p ≤ 0.05) consistent with a role for amino acids (or the proteins they make up) in ACC stabilisation. Intra-granule variation in ACC (RSD = 16%) and amino acid concentration (RSD = 22–35%) was high for granules produced by the same earthworm. Maps of ACC distribution produced using synchrotron-based μ-FTIR mapping of granule thin sections and the relative intensity of the ν2: ν4 peak ratio, cluster analysis and component regression using ACC and calcite standards showed similar spatial distributions of likely ACC-rich and calcite-rich areas. We could not identify organic peaks in the μ-FTIR spectra and thus could not determine whether ACC-rich domains also had relatively high amino acid concentrations. No correlation exists between ACC distribution and elemental concentrations determined by EMPA. Conclusions ACC present in earthworm CaCO3 granules is highly stable. Our results suggest a role for amino acids (or proteins) in this stability. We see no evidence for stabilisation of ACC by incorporation of inorganic components

Characterization of megahertz X ray laser beams by multishot desorption imprints in PMMA

Proper diagnostics of intense free electron laser FEL X ray pulses is indisputably important for experimental data analysis as well as for the protection of beamline optical elements. New challenges for beam diagnostic methods are introduced by modern FEL facilities capable of delivering powerful pulses at megahertz MHz repetition rates. In this paper, we report the first characterization of a defocused MHz 13.5 nm beam generated by the free electron laser in Hamburg FLASH using the method of multi pulse desorption imprints in poly methyl methacrylate PMMA . The beam fluence profile is reconstructed in a novel and highly accurate way that takes into account the nonlinear response of material removal to total dose delivered by multiple pulses. The algorithm is applied to experimental data of single shot ablation imprints and multi shot desorption imprints at both low 10 Hz and high 1 MHz repetition rates. Reconstructed response functions show a great agreement with the theoretical desorption response function mode

Experimental study of EUV mirror radiation damage resistance under long term free electron laser exposures below the single shot damage threshold

The durability of grazing and normal incidence optical coatings has been experimentally assessed under free electron laser irradiation at various numbers of pulses up to 16 million shots and various fluence levels below 10 of the single shot damage threshold. The experiment was performed at FLASH, the Free electron LASer in Hamburg, using 13.5 nm extreme UV EUV radiation with 100 fs pulse duration. Polycrystalline ruthenium and amorphous carbon 50 nm thin films on silicon substrates were tested at total external reflection angles of 20 and 10 grazing incidence, respectively. Mo Si periodical multilayer structures were tested in the Bragg reflection condition at 16 off normal angle of incidence. The exposed areas were analysed post mortem using differential contrast visible light microscopy, EUV reflectivity mapping and scanning X ray photoelectron spectroscopy. The analysis revealed that Ru and Mo Si coatings exposed to the highest dose and fluence level show a few per cent drop in their EUV reflectivity, which is explained by EUV induced oxidation of the surfac

Mechanism of single shot damage of Ru thin films irradiated by femtosecond extreme UV free electron laser

Ruthenium is a perspective material to be used for XUV mirrors at free electron laser facilities. Yet, it is still poorly studied in the context of ultrafast laser matter interaction. In this work, we present single shot damage studies of thin Ru films irradiated by femtosecond XUV free electron laser pulses at FLASH. Ex situ analysis of the damaged spots, performed by different types of microscopy, shows that the weakest detected damage is surface roughening. For higher fluences we observe ablation of Ru. Combined simulations using Monte Carlo code XCASCADE 3D and the two temperature model reveal that the damage mechanism is photomechanical spallation, similar to the case of irradiating the target with optical lasers. The analogy with the optical damage studies enables us to explain the observed damage morphologie