Advanced information processing system: The Army fault tolerant architecture conceptual study. Volume 1: Army fault tolerant architecture overview

Digital computing systems needed for Army programs such as the Computer-Aided Low Altitude Helicopter Flight Program and the Armored Systems Modernization (ASM) vehicles may be characterized by high computational throughput and input/output bandwidth, hard real-time response, high reliability and availability, and maintainability, testability, and producibility requirements. In addition, such a system should be affordable to produce, procure, maintain, and upgrade. To address these needs, the Army Fault Tolerant Architecture (AFTA) is being designed and constructed under a three-year program comprised of a conceptual study, detailed design and fabrication, and demonstration and validation phases. Described here are the results of the conceptual study phase of the AFTA development. Given here is an introduction to the AFTA program, its objectives, and key elements of its technical approach. A format is designed for representing mission requirements in a manner suitable for first order AFTA sizing and analysis, followed by a discussion of the current state of mission requirements acquisition for the targeted Army missions. An overview is given of AFTA's architectural theory of operation

Advanced information processing system: The Army fault tolerant architecture conceptual study. Volume 2: Army fault tolerant architecture design and analysis

Described here is the Army Fault Tolerant Architecture (AFTA) hardware architecture and components and the operating system. The architectural and operational theory of the AFTA Fault Tolerant Data Bus is discussed. The test and maintenance strategy developed for use in fielded AFTA installations is presented. An approach to be used in reducing the probability of AFTA failure due to common mode faults is described. Analytical models for AFTA performance, reliability, availability, life cycle cost, weight, power, and volume are developed. An approach is presented for using VHSIC Hardware Description Language (VHDL) to describe and design AFTA's developmental hardware. A plan is described for verifying and validating key AFTA concepts during the Dem/Val phase. Analytical models and partial mission requirements are used to generate AFTA configurations for the TF/TA/NOE and Ground Vehicle missions

The political economy of the Jospin government

This article explores the political economy of the French Socialist Party (PS), beginning with the neo-liberal U-turn of 1983. It then charts the re-evaluation of the PS's political economic foundations after the 1993 defeat, the rejection of the neo-liberal 'pensée unique', and the rehabilitation of a broadly Keynesian frame of reference. The article goes on to explore how this shift has fed through into the Jospin government's policy and positions at both the national and international level. It explores aspirations to reinvent the EU as a Keynesian social democratic 'policy space', and at the national level, employment, macroeconomic, and structural policies

Weak charge form factor and radius of 208Pb through parity violation in electron scattering

We use distorted wave electron scattering calculations to extract the weak charge form factor F_W(q), the weak charge radius R_W, and the point neutron radius R_n, of 208Pb from the PREX parity violating asymmetry measurement. The form factor is the Fourier transform of the weak charge density at the average momentum transfer q=0.475 fm$^{-1}$. We find F_W(q) =0.204 \pm 0.028 (exp) \pm 0.001 (model). We use the Helm model to infer the weak radius from F_W(q). We find R_W= 5.826 \pm 0.181 (exp) \pm 0.027 (model) fm. Here the exp error includes PREX statistical and systematic errors, while the model error describes the uncertainty in R_W from uncertainties in the surface thickness \sigma of the weak charge density. The weak radius is larger than the charge radius, implying a "weak charge skin" where the surface region is relatively enriched in weak charges compared to (electromagnetic) charges. We extract the point neutron radius R_n=5.751 \pm 0.175 (exp) \pm 0.026 (model) \pm 0.005 (strange) fm$, from R_W. Here there is only a very small error (strange) from possible strange quark contributions. We find R_n to be slightly smaller than R_W because of the nucleon's size. Finally, we find a neutron skin thickness of R_n-R_p=0.302\pm 0.175 (exp) \pm 0.026 (model) \pm 0.005 (strange) fm, where R_p is the point proton radius.Comment: 5 pages, 1 figure, published in Phys Rev. C. Only one change in this version: we have added one author, also to metadat

The size of electron-hole pairs in pi conjugated systems

We have performed momentum dependent electron energy-loss studies of the electronic excitations in sexithiophene and compared the results to those from parent oligomers. Our experiment probes the dynamic structure factor S(q,omega)and we show that the momentum dependent intensity variation of the excitations observed can be used to extract the size of the electron-hole pair created in the excitation process. The extension of the electron-hole pairs along the molecules is comparable to the length of the molecules and thus maybe only limited by structural constraints. Consequently, the primary intramolecular electron-hole pairs are relatively weakly bound. We find no evidence for the formation of excitations localized on single thiophene units.Comment: RevTex, 3 figures, to appear in Physical Review Letter

Electroluminescence-detected magnetic-resonance study of polyparaphenylenevinylene (PPV)-based light-emitting diodes

The strong electroluminescence (EL)-detected magnetic resonance of PPV-based light emitting diodes is compared to the conductivity (sigma)- and photoluminescence (PL)-detected resonances. It provides direct evidence that polaron-to-singlet exciton conversion is responsible for the EL. In contrast to the narrow PL-enhancing resonance assigned to polaron recombination, strong EL- and sigma-quenching resonances are attributed to the spin-dependent polaron-to-bipolaron decay. The half-field EL- and sigma-detected resonances of two distinct triplet excitons is believed to result from triplet-triplet fusion to singlets

High Circular Polarization of Electroluminescence Achieved via Self-Assembly of a Light-Emitting Chiral Conjugated Polymer into Multidomain Cholesteric Films

We demonstrate a facile route to obtain high and broad-band circular polarization of electroluminescence in single-layer polymer OLEDs. As a light-emitting material we use a donor-acceptor polyfluorene with enantiomerically pure chiral side-chains. We show that upon thermal annealing the polymer self-assembles into a multidomain cholesteric film. By varying the thickness of the polymer emitting layer, we achieve high levels of circular polarization of electroluminescence (up to 40% excess of right-handed polarization), which are the highest reported for polymer OLEDs not using chiral dopants or alignment layers. Mueller matrix ellipsometry shows strong optical anisotropies in the film, indicating that the circular polarization of luminescence arises mainly after the photon has been generated, through selective scattering and birefringence correlated in the direction of the initial linear polarization of the photon. Our work demonstrates that chirally substituted conjugated polymers can combine photonic and semiconducting properties in advanced optoelectronic devices

A SPION-eicosane protective coating for water soluble capsules : evidence for on-demand drug release triggered by magnetic hyperthermia

An orally-administered system for targeted, on-demand drug delivery to the gastrointestinal (GI) tract is highly desirable due to the high instances of diseases of that organ system and harsh mechanical and physical conditions any such system has to endure. To that end, we present an iron oxide nanoparticle/wax composite capsule coating using magnetic hyperthermia as a release trigger. The coating is synthesised using a simple dip-coating process from pharmaceutically approved materials using a gelatin drug capsule as a template. We show that the coating is impervious to chemical conditions within the GI tract and is completely melted within two minutes when exposed to an RF magnetic field under biologically-relevant conditions. The overall simplicity of action, durability and non-toxic and inexpensive nature of our system demonstrated herein are key for successful drug delivery systems