213 research outputs found

    Suppression of spin-pumping by a MgO tunnel-barrier

    Full text link
    Spin-pumping generates pure spin currents in normal metals at the ferromagnet (F)/normal metal (N) interface. The efficiency of spin-pumping is given by the spin mixing conductance, which depends on N and the F/N interface. We directly study the spin-pumping through an MgO tunnel-barrier using the inverse spin Hall effect, which couples spin and charge currents and provides a direct electrical detection of spin currents in the normal metal. We find that spin-pumping is suppressed by the tunnel-barrier, which is contrary to recent studies that suggest that the spin mixing conductance can be enhanced by a tunnel-barrier inserted at the interface

    Detection and quantification of inverse spin Hall effect from spin pumping in permalloy/normal metal bilayers

    Full text link
    Spin pumping is a mechanism that generates spin currents from ferromagnetic resonance (FMR) over macroscopic interfacial areas, thereby enabling sensitive detection of the inverse spin Hall effect that transforms spin into charge currents in non-magnetic conductors. Here we study the spin-pumping-induced voltages due to the inverse spin Hall effect in permalloy/normal metal bilayers integrated into coplanar waveguides for different normal metals and as a function of angle of the applied magnetic field direction, as well as microwave frequency and power. We find good agreement between experimental data and a theoretical model that includes contributions from anisotropic magnetoresistance (AMR) and inverse spin Hall effect (ISHE). The analysis provides consistent results over a wide range of experimental conditions as long as the precise magnetization trajectory is taken into account. The spin Hall angles for Pt, Pd, Au and Mo were determined with high precision to be 0.013±0.0020.013\pm0.002, 0.0064±0.0010.0064\pm0.001, 0.0035±0.00030.0035\pm0.0003 and −0.0005±0.0001-0.0005\pm0.0001, respectively.Comment: 11 page

    Quantifying spin Hall angles from spin pumping: Experiments and Theory

    Full text link
    Spin Hall effects intermix spin and charge currents even in nonmagnetic materials and, therefore, ultimately may allow the use of spin transport without the need for ferromagnets. We show how spin Hall effects can be quantified by integrating permalloy/normal metal (N) bilayers into a coplanar waveguide. A dc spin current in N can be generated by spin pumping in a controllable way by ferromagnetic resonance. The transverse dc voltage detected along the permalloy/N has contributions from both the anisotropic magnetoresistance (AMR) and the spin Hall effect, which can be distinguished by their symmetries. We developed a theory that accounts for both. In this way, we determine the spin Hall angle quantitatively for Pt, Au and Mo. This approach can readily be adapted to any conducting material with even very small spin Hall angles.Comment: 4 pages, 4 figure

    Magnetic Vortex Resonance in Patterned Ferromagnetic Dots

    Full text link
    We report a high-resolution experimental detection of the resonant behavior of magnetic vortices confined in small disk-shaped ferromagnetic dots. The samples are magnetically soft Fe-Ni disks of diameter 1.1 and 2.2 um, and thickness 20 and 40 nm patterned via electron beam lithography onto microwave co-planar waveguides. The vortex excitation spectra were probed by a vector network analyzer operating in reflection mode, which records the derivative of the real and the imaginary impedance as a function of frequency. The spectra show well-defined resonance peaks in magnetic fields smaller than the characteristic vortex annihilation field. Resonances at 162 and 272 MHz were detected for 2.2 and 1.1 um disks with thickness 40 nm, respectively. A resonance peak at 83 MHz was detected for 20-nm thick, 2-um diameter disks. The resonance frequencies exhibit weak field dependence, and scale as a function of the dot geometrical aspect ratio. The measured frequencies are well described by micromagnetic and analytical calculations that rely only on known properties of the dots (such as the dot diameter, thickness, saturation magnetization, and exchange stiffness constant) without any adjustable parameters. We find that the observed resonance originates from the translational motion of the magnetic vortex core.Comment: submitted to PRB, 17 pages, 5 Fig

    Molecular Dynamics Study of the Nematic-Isotropic Interface

    Full text link
    We present large-scale molecular dynamics simulations of a nematic-isotropic interface in a system of repulsive ellipsoidal molecules, focusing in particular on the capillary wave fluctuations of the interfacial position. The interface anchors the nematic phase in a planar way, i.e., the director aligns parallel to the interface. Capillary waves in the direction parallel and perpendicular to the director are considered separately. We find that the spectrum is anisotropic, the amplitudes of capillary waves being larger in the direction perpendicular to the director. In the long wavelength limit, however, the spectrum becomes isotropic and compares well with the predictions of a simple capillary wave theory.Comment: to appear in Phys. Rev.

    Surface layering of liquids: The role of surface tension

    Full text link
    Recent measurements show that the free surfaces of liquid metals and alloys are always layered, regardless of composition and surface tension; a result supported by three decades of simulations and theory. Recent theoretical work claims, however, that at low enough temperatures the free surfaces of all liquids should become layered, unless preempted by bulk freezing. Using x-ray reflectivity and diffuse scattering measurements we show that there is no observable surface-induced layering in water at T=298 K, thus highlighting a fundamental difference between dielectric and metallic liquids. The implications of this result for the question in the title are discussed.Comment: 5 pages, 4 figures, to appear in Phys. Rev. B. 69 (2004

    Protective Efficacy of Menthol Propylene Glycol Carbonate Compared to N, N-diethyl-Methylbenzamide Against Mosquito Bites in Northern Tanzania.

    Get PDF
    The reduction of malaria parasite transmission by preventing human-vector contact is critical in lowering disease transmission and its outcomes. This underscores the need for effective and long lasting arthropod/insect repellents. Despite the reduction in malaria transmission and outcomes in Tanzania, personal protection against mosquito bites is still not well investigated. This study sought to determine the efficacy of menthol propylene glycol carbonate (MR08), Ocimum suave as compared to the gold standard repellent N, N-diethyl-methylbenzamide (DEET), either as a single dose or in combination (blend), both in the laboratory and in the field against Anopheles gambiae s.l and Culex quinquefasciatus. In the laboratory evaluations, repellents were applied on one arm while the other arm of the same individual was treated with a base cream. Each arm was separately exposed in cages with unfed female mosquitoes. Repellents were evaluated either as a single dose or as a blend. Efficacy of each repellent was determined by the number of mosquitoes that landed and fed on treated arms as compared to the control or among them. In the field, evaluations were performed by human landing catches at hourly intervals from 18:00  hr to 01:00  hr. A total of 2,442 mosquitoes were collected during field evaluations, of which 2,376 (97.30%) were An. gambiae s.l while 66 (2.70%) were Cx. quinquefaciatus. MR08 and DEET had comparatively similar protective efficacy ranging from 92% to 100 for both single compound and blends. These findings indicate that MR08 has a similar protective efficacy as DEET for personal protection outside bed nets when used singly and in blends. Because of the personal protection provided by MR08, DEET and blends as topical applicants in laboratory and field situations, these findings suggest that, these repellents could be used efficiently in the community to complement existing tools. Overall, Cx. quinquefasciatus were significantly prevented from blood feeding compared to An. gambiae s.l. The incorporation of these topical repellents for protection against insect bites can be of additional value in the absence or presence of IRS and ITNs coverage. However, a combination of both the physical (bed nets) and the repellent should be used in an integrated manner for maximum protection, especially before going to bed. Additional research is needed to develop repellents with longer duration of protection

    Nucleocytoplasmic transport: a thermodynamic mechanism

    Full text link
    The nuclear pore supports molecular communication between cytoplasm and nucleus in eukaryotic cells. Selective transport of proteins is mediated by soluble receptors, whose regulation by the small GTPase Ran leads to cargo accumulation in, or depletion from the nucleus, i.e., nuclear import or nuclear export. We consider the operation of this transport system by a combined analytical and experimental approach. Provocative predictions of a simple model were tested using cell-free nuclei reconstituted in Xenopus egg extract, a system well suited to quantitative studies. We found that accumulation capacity is limited, so that introduction of one import cargo leads to egress of another. Clearly, the pore per se does not determine transport directionality. Moreover, different cargo reach a similar ratio of nuclear to cytoplasmic concentration in steady-state. The model shows that this ratio should in fact be independent of the receptor-cargo affinity, though kinetics may be strongly influenced. Numerical conservation of the system components highlights a conflict between the observations and the popular concept of transport cycles. We suggest that chemical partitioning provides a framework to understand the capacity to generate concentration gradients by equilibration of the receptor-cargo intermediary.Comment: in press at HFSP Journal, vol 3 16 text pages, 1 table, 4 figures, plus Supplementary Material include

    CandidaDB: a genome database for Candida albicans pathogenomics

    Get PDF
    CandidaDB is a database dedicated to the genome of the most prevalent systemic fungal pathogen of humans, Candida albicans. CandidaDB is based on an annotation of the Stanford Genome Technology Center C.albicans genome sequence data by the European Galar Fungail Consortium. CandidaDB Release 2.0 (June 2004) contains information pertaining to Assembly 19 of the genome of C.albicans strain SC5314. The current release contains 6244 annotated entries corresponding to 130 tRNA genes and 5917 protein-coding genes. For these, it provides tentative functional assignments along with numerous pre-run analyses that can assist the researcher in the evaluation of gene function for the purpose of specific or large-scale analysis. CandidaDB is based on GenoList, a generic relational data schema and a World Wide Web interface that has been adapted to the handling of eukaryotic genomes. The interface allows users to browse easily through genome data and retrieve information. CandidaDB also provides more elaborate tools, such as pattern searching, that are tightly connected to the overall browsing system. As the C.albicans genome is diploid and still incompletely assembled, CandidaDB provides tools to browse the genome by individual supercontigs and to examine information about allelic sequences obtained from complementary contigs. CandidaDB is accessible at http://genolist.pasteur.fr/CandidaDB
    • 

    corecore