Effect of blade geometry on the aerodynamic loads produced by vertical-axis wind turbines

Accurate aerodynamic modelling of vertical-axis wind turbines poses a significant challenge. The rotation of the turbine induces large variations in the angle of attack of its blades that can manifest as dynamic stall. In addition, interactions between the blades of the turbine and the wake that they produce can result in impulsive changes to the aerodynamic loading. The Vorticity Transport Model has been used to simulate the aerodynamic performance and wake dynamics of three different vertical-axis wind turbine configurations. It is known that vertical-axis turbines with either straight or curved blades deliver torque to their shaft that fluctuates at the blade passage frequency of the rotor. In contrast, a turbine with helically twisted blades delivers a relatively steady torque to the shaft. In this article, the interactions between helically twisted blades and the vortices within their wake are shown to result in localized perturbations to the aerodynamic loading on the rotor that can disrupt the otherwise relatively smooth power output that is predicted by simplistic aerodynamic tools that do not model the wake to sufficient fidelity. Furthermore, vertical-axis wind turbines with curved blades are shown to be somewhat more susceptible to local dynamic stall than turbines with straight blades

Geometric approach to Fletcher's ideal penalty function

Original article can be found at: www.springerlink.com Copyright Springer. [Originally produced as UH Technical Report 280, 1993]In this note, we derive a geometric formulation of an ideal penalty function for equality constrained problems. This differentiable penalty function requires no parameter estimation or adjustment, has numerical conditioning similar to that of the target function from which it is constructed, and also has the desirable property that the strict second-order constrained minima of the target function are precisely those strict second-order unconstrained minima of the penalty function which satisfy the constraints. Such a penalty function can be used to establish termination properties for algorithms which avoid ill-conditioned steps. Numerical values for the penalty function and its derivatives can be calculated efficiently using automatic differentiation techniques.Peer reviewe

Applications of flight control system methods to an advanced combat rotorcraft

Advanced flight control system design, analysis, and testing methodologies developed at the Ames Research Center are applied in an analytical and flight test evaluation of the Advanced Digital Optical Control System (ADOCS) demonstrator. The primary objectives are to describe the knowledge gained about the implications of digital flight control system design for rotorcraft, and to illustrate the analysis of the resulting handling-qualities in the context of the proposed new handling-qualities specification for rotorcraft. Topics covered in-depth are digital flight control design and analysis methods, flight testing techniques, ADOCS handling-qualities evaluation results, and correlation of flight test results with analytical models and the proposed handling-qualities specification. The evaluation of the ADOCS demonstrator indicates desirable response characteristics based on equivalent damping and frequency, but undersirably large effective time-delays (exceeding 240 m sec in all axes). Piloted handling-qualities are found to be desirable or adequate for all low, medium, and high pilot gain tasks; but handling-qualities are inadequate for ultra-high gain tasks such as slope and running landings

Same traits, different variance : Item-Level Variation Within Personality Measures

© 2014 the Author(s). This article has been published under the terms of the Creative Commons Attribution License. Without requesting permission from the Author or SAGE, you may further copy, distribute, transmit, and adapt the article, with the condition that the Author and SAGE Open are in each case credited as the source of the article. The version of record, Jamie S. Churcyard, Karen J. Pine, Shivani Sharma, Ben (C) Fletcher, ' Same Traits, Difference Variance: Item-Level Variation Within Personality Measures', SAGE Open, 2014, is available online via doi: 10.1177/2158244014522634Personality trait questionnaires are regularly used in individual differences research to examine personality scores between participants, although trait researchers tend to place little value on intra-individual variation in item ratings within a measured trait. The few studies that examine variability indices have not considered how they are related to a selection of psychological outcomes, so we recruited 160 participants (age M = 24.16, SD = 9.54) who completed the IPIP-HEXACO personality questionnaire and several outcome measures. Heterogenous within-subject differences in item ratings were found for every trait/facet measured, with measurement error that remained stable across the questionnaire. Within-subject standard deviations, calculated as measures of individual variation in specific item ratings within a trait/facet, were related to outcomes including life satisfaction and depression. This suggests these indices represent valid constructs of variability, and that researchers administering behavior statement trait questionnaires with outcome measures should also apply item-level variability indices.Peer reviewedFinal Published versio

Escherichia coli contamination and health aspects of soil and tomatoes (Solanum lycopersicum L.) subsurface drip irrigated with on-site treated domestic wastewater.

Faecal contamination of soil and tomatoes irrigated by sprinkler as well as surface and subsurface drip irrigation with treated domestic wastewater were compared in 2007 and 2008 at experimental sites in Crete and Italy. Wastewater was treated by Membrane Bio Reactor (MBR) technology, gravel filtration or UV-treatment before used for irrigation. Irrigation water, soil and tomato samples were collected during two cropping seasons and enumerated for the faecal indicator bacterium Escherichia coli and helminth eggs. The study found elevated levels of E. coli in irrigation water (mean: Italy 1753 cell forming unit (cfu) per 100 ml and Crete 488 cfu per 100 ml) and low concentrations of E. coli in soil (mean: Italy 95 cfu g(-1) and Crete 33 cfu g(-1)). Only two out of 84 tomato samples in Crete contained E. coli (mean: 2700 cfu g(-1)) while tomatoes from Italy were free of E. coli. No helminth eggs were found in the irrigation water or on the tomatoes from Crete. Two tomato samples out of 36 from Italy were contaminated by helminth eggs (mean: 0.18 eggs g(-1)) and had been irrigated with treated wastewater and tap water, respectively. Pulsed Field Gel Electrophoresis DNA fingerprints of E. coli collected during 2008 showed no identical pattern between water and soil isolates which indicates contribution from other environmental sources with E. coli, e.g. wildlife. A quantitative microbial risk assessment (QMRA) model with Monte Carlo simulations adopted by the World Health Organization (WHO) found the use of tap water and treated wastewater to be associated with risks that exceed permissible limits as proposed by the WHO (1.0 × 10(-3) disease risk per person per year) for the accidental ingestion of irrigated soil by farmers (Crete: 0.67 pppy and Italy: 1.0 pppy). The QMRA found that the consumption of tomatoes in Italy was deemed to be safe while permissible limits were exceeded in Crete (1.0 pppy). Overall the quality of tomatoes was safe for human consumption since the disease risk found on Crete was based on only two contaminated tomato samples. It is a fundamental limitation of the WHO QMRA model that it is not based on actual pathogen numbers, but rather on numbers of E. coli converted to estimated pathogen numbers, since it is widely accepted that there is poor correlation between E. coli and viral and parasite pathogens. Our findings also stress the importance of the external environment, typically wildlife, as sources of faecal contamination

Quantized charge pumping through a quantum dot by surface acoustic waves

We present a realization of quantized charge pumping. A lateral quantum dot is defined by metallic split gates in a GaAs/AlGaAs heterostructure. A surface acoustic wave whose wavelength is twice the dot length is used to pump single electrons through the dot at a frequency f=3GHz. The pumped current shows a regular pattern of quantization at values I=nef over a range of gate voltage and wave amplitude settings. The observed values of n, the number of electrons transported per wave cycle, are determined by the number of electronic states in the quantum dot brought into resonance with the fermi level of the electron reservoirs during the pumping cycle.Comment: 8 page

Transverse Magnetoresistance of GaAs/AlGaAs Heterojunctions in the Presence of Parallel Magnetic Fields

We have calculated the resistivity of a GaAs\slash AlGaAs heterojunction in the presence of both an in--plane magnetic field and a weak perpendicular component using a semiclassical Boltzmann transport theory. These calculations take into account fully the distortion of the Fermi contour which is induced by the parallel magnetic field. The scattering of electrons is assumed to be due to remote ionized impurities. A positive magnetoresistance is found as a function of the perpendicular component, in good qualitative agreement with experimental observations. The main source of this effect is the strong variation of the electronic scattering rate around the Fermi contour which is associated with the variation in the mean distance of the electronic states from the remote impurities. The magnitude of the positive magnetoresistance is strongly correlated with the residual acceptor impurity density in the GaAs layer. The carrier lifetime anisotropy also leads to an observable anisotropy in the resistivity with respect to the angle between the current and the direction of the in--plane magnetic field.Comment: uuencoded file containing a 26 page RevTex file and 14 postscript figures. Submitted to Phys. Rev.

'Who do "they" cheer for?' Cricket, diaspora, hybridity and divided loyalties amongst British Asians

This article explores the relationship between British Asians' sense of nationhood, citizenship, ethnicity and some of their manifestations in relation to sports fandom: specifically in terms of how cricket is used as a means of articulating diasporic British Asian identities. Norman Tebbit's 'cricket test' is at the forefront of this article to tease out the complexities of being British Asian in terms of supporting the English national cricket team. The first part of the article locates Tebbit's 'cricket test' within the wider discourse of multiculturalism. The analysis then moves to focus on the discourse of sports fandom and the concept of 'home team advantage' arguing that sports venues represent significant sites for nationalist and cultural expression due to their connection with national history. The article highlights how supporting 'Anyone but England', thereby rejecting ethnically exclusive notions of 'Englishness' and 'Britishness', continues to be a definer of British Asians' cultural identities. The final section situates these trends within the discourse of hybridity and argues that sporting allegiances are often separate from considerations of national identity and citizenship. Rather than placing British Asians in an either/or situation, viewing British 'Asianness' in hybrid terms enables them to celebrate their traditions and histories, whilst also being proud of their British citizenship. © The Author(s) 2011