47 research outputs found

    Mentolabial angle and aesthetics : a quantitative investigation of idealized and normative values

    Get PDF
    BACKGROUND: This study is a quantitative evaluation of the influence of the mentolabial angle on perceived attractiveness and threshold values of desire for surgery. METHODS: The mentolabial angle of an idealized silhouette male Caucasian profile image was altered incrementally between 84° and 162°. Images were rated on a Likert scale by pretreatment orthognathic patients (n = 75), lay people (n = 75) and clinicians (n = 35). RESULTS: A mentolabial angle of approximately 107° to 118° was deemed the most attractive, with a range of up to 140° deemed acceptable. Angles above or below this range were perceived as unattractive, and anything outside the range of below 98° or above 162° was deemed very unattractive. A deep mentolabial angle (84°) or an almost flat angle (162°) was deemed the least attractive. In terms of threshold values of desire for surgery, for all groups, a threshold value of ≥162° and ≤84° indicated a preference for surgery, although clinicians were least likely to suggest surgery. The clinician group was the most consistent, and for many of the images, there was some variation in agreement between clinicians and lay people as to whether surgery is required. There was even more variability in the assessments for the patient group. CONCLUSIONS: It is recommended that in orthognathic and genioplasty planning, the range of normal variability of the mentolabial angle, in terms of observer acceptance, is taken into account as well as threshold values of desire for surgery. The importance of using patients as observers in attractiveness research is stressed

    Mandibular shape prediction using cephalometric analysis: applications in craniofacial analysis, forensic anthropology and archaeological reconstruction.

    Get PDF
    BACKGROUND: The human mandible is variable in shape, size and position and any deviation from normal can affect the facial appearance and dental occlusion. OBJECTIVES: The objectives of this study were to determine whether the Sassouni cephalometric analysis could help predict two-dimensional mandibular shape in humans using cephalometric planes and landmarks. MATERIALS AND METHODS: A retrospective computerised analysis of 100 lateral cephalometric radiographs taken at Kingston Hospital Orthodontic Department was carried out. RESULTS: Results showed that the Euclidean straight-line mean difference between the estimated position of gonion and traced position of gonion was 7.89 mm and the Euclidean straight-line mean difference between the estimated position of pogonion and the traced position of pogonion was 11.15 mm. The length of the anterior cranial base as measured by sella-nasion was positively correlated with the length of the mandibular body gonion-menton, r = 0.381 and regression analysis showed the length of the anterior cranial base sella-nasion could be predictive of the length of the mandibular body gonion-menton by the equation 22.65 + 0.5426x, where x = length of the anterior cranial base (SN). There was a significant association with convex shaped palates and oblique shaped mandibles, p = 0.0004. CONCLUSIONS: The method described in this study can be used to help estimate the position of cephalometric points gonion and pogonion and thereby sagittal mandibular length. This method is more accurate in skeletal class I cases and therefore has potential applications in craniofacial anthropology and the 'missing mandible' problem in forensic and archaeological reconstruction

    Proportions of the aesthetic African-Caribbean face : idealized ratios, comparison with the golden proportion and perceptions of attractiveness

    Get PDF
    Abstract Background In the absence of clear guidelines for facial aesthetic surgery, most surgeons rely on expert intuitive judgement when planning aesthetic and reconstructive surgery. One of the most famous theories regarding “ideal” facial proportions is that of the golden proportion. However, there are conflicting opinions as to whether it can be used to assess facial attractiveness. The aim of this investigation was to assess facial ratios of professional black models and to compare the ratios with the golden proportion. Methods Forty photographs of male and female professional black models were collected. Observers were asked to assign a score from 1 to 10 (1 = not very attractive, 10 = very attractive). A total of 287 responses were analysed for grading behaviour according to various demographic factors by two groups of observers. The best graded photographs were compared with the least well-graded photographs to identify any differences in their facial ratios. The models’ facial ratios were calculated and compared with the golden proportion. Results Differences in grading behaviour were observed amongst the two assessment groups. Only one out of the 12 facial ratios was not significantly different from the golden proportion. Conclusions Only one facial ratio was observed to be similar to the golden proportion in professional model facial photographs. No correlation was found between facial ratios in professional black models with the golden proportion. It is proposed that an individualistic treatment for each ratio is a rather better method to guide future practice

    Validation of a new three-dimensional imaging system using comparative craniofacial anthropometry

    Get PDF
    Abstract Background The aim of this study is to validate a new three-dimensional craniofacial stereophotogrammetry imaging system (3dMDface) through comparison with manual facial surface anthropometry. The null hypothesis was that there is no difference between craniofacial measurements using anthropometry vs. the 3dMDface system. Methods Facial images using the new 3dMDface system were taken from six randomly selected subjects, sitting in natural head position, on six separate occasions each 1 week apart, repeated twice at each sitting. Exclusion criteria were excess facial hair, facial piercings and undergoing current dentofacial treatment. 3dMDvultus software allowed facial landmarks to be marked and measurements recorded. The same measurements were taken using manual anthropometry, using soluble eyeliner to pinpoint landmarks, and sliding and spreading callipers and measuring tape to measure distances. The setting for the investigation was a dental teaching hospital and regional (secondary and tertiary care) cleft centre. The main outcome measure was comparison of the craniofacial measurements using the two aforementioned techniques. Results The results showed good agreement between craniofacial measurements using the 3dMDface system compared with manual anthropometry. For all measurements, except chin height and labial fissure width, there was a greater variability with the manual method compared to 3D assessment. Overall, there was a significantly greater variability in manual compared with 3D assessments (p < 0.02). Conclusions The 3dMDface system is validated for craniofacial measurements

    Perception of improvement after orthognathic surgery: the important variables affecting patient satisfaction

    Get PDF
    PURPOSE: We evaluated which factors affect patient satisfaction and if patient expectations were fulfilled after orthognathic surgery. METHODS: Questionnaires consisting of 14 questions were given 1 year after bimaxillary osteotomy for class-III correction to subjects. Six questions were answered using an 11-point rating scale based on a visual analog scale (VAS; 0 = poor; 10 = excellent). Also included were seven closed-form questions with yes/no answers, as well as one open question for 'further remarks'. Sagittal and vertical cephalometric parameters were determined on postoperative cephalograms. RESULTS: Seventy-seven patients (37 females, 40 males; mean age, 23.4 +/- 4.9 (SD) years) responded. The intention to undergo surgery only for aesthetic improvement was noted in 11.9% of patients; only improvement of chewing function in 15.5%; both in 71.4%; and none/don't know in 2.6%. Postoperative satisfaction was rated (in means) with 8.13 +/- 1.97 on VAS and correlated significantly with the opinions of friends and relatives. Facial aesthetics was rated 5.6 +/- 1.2 before surgery and 8.1 +/- 1.5 after surgery (p = 0.04). Preoperative chewing function was rated 5.65 +/- 1.8 and 8.03 +/- 1.51 after surgery (p = 0.014). TMJ disorders or hypoesthesia had no negative impacts. Cephalometric analyses revealed a significantly lower SNB (75.3 degrees +/- 2.7 degrees ; p = 0.033) in patients rating lower than grade 7 for overall satisfaction. For SNA and ArGoMe, no significant differences were observed. CONCLUSION: The most distinctive factors for patient satisfaction after orthognathic surgery were chewing function and facial aesthetics with respect to the lower face. Function, aesthetics, and even psychological aspects should be considered equally when planning surgery

    Normative anthropometry and proportions of the Kenyan-African face and comparative anthropometry in relation to African Americans and North American Whites

    Get PDF
    Abstract Background There is no normative craniofacial anthropometric data for the Kenyan-African population. The purpose of this investigation was to determine normative anthropometric craniofacial measurements and proportional relationships for Kenyans of African descent and to compare the data with African Americans (AA), North American Whites (NAW), and neoclassical canons. Methods Twenty-five direct facial anthropometric measurements, and 4 angular measurements, were taken on 72 Kenyan-African participants (age range 18–30 years) recruited at the University of Nairobi in Kenya. The data were compared with AA and NAW populations, and neoclassical canons. Descriptive statistics of the variables were computed for the study population. Results Significant differences between both Kenyan males and females were detected in forehead height (~ 5 mm greater for males, ~ 4.5 mm for females), nasal height (reduced by ~ 4 mm in males, ~ 3 mm in females), nasal width (8–9 mm greater), upper lip height (> 3 mm), and eye width (greater by ~ 3 mm) compared to NAW subjects. All vertical measurements obtained were significantly different compared with NAW. Differences were observed in comparison with AA subjects, but less marked. Mouth width was similar in all groups. Angular measurements were variable. Neoclassical canons did not apply to the Kenyan population. Conclusions Anthropometric measurements of NAW showed clear differences when compared with the Kenyan population, and variations exist with comparative AA data. The anthropometric data in terms of linear measurements, angular measurements, and proportional values described may serve as a database for facial analysis in the Kenyan-African population

    Book review for “Orthognathic Surgery: Principles, Planning and Practice”

    No full text

    Submental-cervical angle: Perceived attractiveness and threshold values of desire for surgery

    Get PDF
    AIM: The submental-cervical angle may alter as a result of mandibular orthognathic surgery and/or the ageing process and is therefore an important facial aesthetic parameter for comparative diagnosis and treatment planning. The purpose of this study was to undertake a quantitative evaluation of the influence of the submental-cervical angle on perceived attractiveness and threshold values of desire for surgery. STUDY DESIGN: The submental-cervical angle of an idealized profile silhouette image was altered incrementally between 90° and 130°. The images were rated on a seven-point Likert scale by pre-treatment orthognathic patients (n = 75), laypeople (n = 75), and clinicians (n = 35). RESULTS: A submental-cervical angle of 90°–105° was deemed acceptable. Angles up to 120° were deemed slightly unattractive by the lay and clinician groups, but very unattractive by the patient group. By 125°–130° all groups perceived the angle as very unattractive. The threshold value of desire for surgery was 110° for patients, 115° for lay people and 125° for clinicians. Patients appear to be more critical than lay and clinician groups. CONCLUSIONS: These ranges of normal variability of the submental-cervical angle and threshold values of desire for surgery, in terms of observer acceptance, should be considered by clinicians in planning mandibular orthognathic surgery and aesthetic surgical procedures of the submental-cervical region
    corecore