1,455 research outputs found

    Dynamic graph models inspired by the Bitcoin network-formation process

    Get PDF

    Zirconium titanate ceramic pigments: Crystal structure, optical spectroscopy and technological properties

    Get PDF
    Srilankite-type zirconium titanate, a promising structure for ceramic pigments, was synthesized at 1400 degrees C following three main doping strategies: (a) ZrTi(1-x)A(x)O(4), (b) ZrTi(1-x-y)A(x)B(y)O(4) and (c) Zr1-xCTiO4 where A = Co, Cr, Fe, Mn. Ni or V (chromophores), B = Sb or W (counterions) and C = Pr (chromophore); x = y = 0.05. Powders were characterized by XRD with Rietveld refinements and DRS in the UV-visible-NIR range; technological properties were appraised in several ceramic matrices (frits, glazes and body). Zirconium titanate can be usefully coloured with first row transition elements, giving green and greenish yellow (Co and Ni); orange-buff (Cr and V); tan-brown hues (Mn and Fe). In industrial-like synthesis conditions, a disordered structure as (Zr,Ti)O-2, with both Zr and Ti randomly distributed in the octahedral site, is achieved. Doping with chromophores and counterions induces unit cell dimensions variation and causes an oversaturation in zirconium oxide. Optical spectroscopy reveals the occurrence of Co2+, Cr3+, Fe3+, Mn2+, Mn3+, Ni2+, V3+ and V4+. The zirconium titanate pigments fulfil current technological requirements for low-temperature applications, but exhibit a limited chemico-physical stability for higher firing temperature and in chemically aggressive media

    Test particle motion in a gravitational plane wave collision background

    Get PDF
    Test particle geodesic motion is analysed in detail for the background spacetimes of the degenerate Ferrari-Ibanez colliding gravitational wave solutions. Killing vectors have been used to reduce the equations of motion to a first order system of differential equations which have been integrated numerically. The associated constants of the motion have also been used to match the geodesics as they cross over the boundary between the single plane wave and interaction zones.Comment: 11 pages, 6 Postscript figure

    High sensitivity phonon-mediated kinetic inductance detector with combined amplitude and phase read-out

    Get PDF
    The development of wide-area cryogenic light detectors with good energy resolution is one of the priorities of next generation bolometric experiments searching for rare interactions, as the simultaneous read-out of the light and heat signals enables background suppression through particle identification. Among the proposed technological approaches for the phonon sensor, the naturally-multiplexed Kinetic Inductance Detectors (KIDs) stand out for their excellent intrinsic energy resolution and reproducibility. To satisfy the large surface requirement (several cm2^2) KIDs are deposited on an insulating substrate that converts the impinging photons into phonons. A fraction of phonons is absorbed by the KID, producing a signal proportional to the energy of the original photons. The potential of this technique was proved by the CALDER project, that reached a baseline resolution of 154±\pm7 eV RMS by sampling a 2×\times2 cm2^2 Silicon substrate with 4 Aluminum KIDs. In this paper we present a prototype of Aluminum KID with improved geometry and quality factor. The design improvement, as well as the combined analysis of amplitude and phase signals, allowed to reach a baseline resolution of 82±\pm4 eV by sampling the same substrate with a single Aluminum KID

    The role of counterions (Mo, Nb, Sb, W) in Cr-, Mn-, Ni- and V-doped rutile ceramic pigments - Part 1. Crystal structure and phase transformations

    Get PDF
    Rutile is widely used as ceramic pigment for its excellent optical properties, high melting point and intense coloration when doped with transition elements. Industrial ceramic pigments are manufactured from anatase Plus chromophore elements (Cr, Mn, Ni or V) and counterions (Nb, Sb or W). Several solid state reactions occur during the synthesis, involving both the anatase-to-rutile transformation (A --> R) and the formation of accessory phases. The A --> R transition is heavily affected by chromophores with a lowering of the onset temperature: V < Cr < Ni < Mn: the effect of counterions is almost completely hidden by that of chromophores, even if the sequence Mo < Sb < W < Nb may be inferred. The crystal structure of rutile pigments is modified by chromophores and counterions doping; in fact, the doping varies the cell parameters, implies a progressive distortion of the octahedral site and a peculiar variation of the mean Ti-O bond length, with longer basal Ti-O distances and a shorter apical Ti-O distance. The pigment co-doped with V and W is different for its minimum Ti-O bond length distortion (BLD), an almost regular TiO6 octahedron, and the occurrence of Ti3+ within the accessory compound Ti5O9

    Active shielding design and optimization of a wireless power transfer (WPT) system for automotive

    Get PDF
    This study deals with the optimization of a shielding structure composed by multiple active coils for mitigating the magnetic field in an automotive wireless power transfer (WPT) system at 85 kHz. Each active coil is independently powered and the most suitable excitation is obtained by an optimization procedure based on the Gradient Descent algorithm. The proposed procedure is described and applied to shield the magnetic field beside an electric vehicle (EV) equipped with SAE standard coils, during wireless charging. The obtained results show that the magnetic field in the most critical area is significantly reduced (i.e., approximately halved) with a very limited influence on the electrical performances (i.e., WPT efficiency decreases by less than 1 percentage point compared to the case without active shielding)

    Multi-mode TES bolometer optimization for the LSPE-SWIPE instrument

    Full text link
    In this paper we explore the possibility of using transition edge sensor (TES) detectors in multi-mode configuration in the focal plane of the Short Wavelength Instrument for the Polarization Explorer (SWIPE) of the balloon-borne polarimeter Large Scale Polarization Explorer (LSPE) for the Cosmic Microwave Background (CMB) polarization. This study is motivated by the fact that maximizing the sensitivity of TES bolometers, under the augmented background due to the multi-mode design, requires a non trivial choice of detector parameters. We evaluate the best parameter combination taking into account scanning strategy, noise constraints, saturation power and operating temperature of the cryostat during the flight.Comment: in Journal of Low Temperature Physics, 05 January 201

    The Role of counterions (Mo, Nb, Sb, W) in Cr-, Mn-, Ni- and V-doped rutile ceramic pigments. Part 2. Colour and technological properties

    Get PDF
    Industrial rutile pigments are manufactured using several chromophores: Cr (giving an orange hue), Mn (tan), Ni (yellow) and V (gray); a second element, the so-called counterion (i.e. Mo, Sb, Nb or W) is always added in order to achieve the desired coloration and/or improve the technological properties (e.g. chemico-physical resistance in ceramic bodies and glazes). The colour of these pigments is determined by both metal-ligand charge transfer (Ti4+ <-> O2-) and crystal field effects (transition metals substituting Ti4+ in octahedral coordination). Though the absorbance bands are broad and frequently overlapped, the UV-vis-NIR spectra suggest the occurrence of Cr3+, Mn2+, Mn3+, Ni2+, V3+, and V4+ as chromophores. Rutile pigments are suitable for through-body (up to 1250 degrees C) and glaze applications (up to 1100 degrees C). The best coloration of porcelain stoneware bodies is achieved with Sb or W as counterions, though the higher stability is ensured by Sb, but in the Ti-Ni-W system. The best glaze colours are accomplished by W-bearing pigments, which however are less stable than Nb- or Sb-containing ones, except than for the V + W coupling. This latter represents a new and very interesting Co-free and Cr-free black pigment for low temperature applications

    Crystal structural and optical properties of Cr-doped Y2Ti2O7 and Y2Sn2O7 pyrochlores

    Get PDF
    Pyrochlore-type [A(2)(VIII)B(2)(VI)O(6)O] rare earth stannates (PS) and titanates (PT), doped with increasing amounts of Cr, develop colours 2 2 ranging from magenta to brown. Combined X-ray and neutron diffraction data revealed that Cr solubility in both pyrochlores is very limited, i.e. 0.07 atoms/formula unit in PS and 0.06 atoms/formula unit in PT. A further increase in the Cr amount determines the formation of the YCrO3 perovskite. Diffuse reflectance spectroscopy data showed that the optical properties of Cr-doped yttrium titanates and stannates are rather similar, and that the final colour of the powders is due to the overlapping peaks of Cr4+ in the octahedral site of the pyrochlore and of Cr3+ in the ternary perovskite. The oxygen occupancy refinement showed that no anion vacancies are formed upon Cr substitution for Sn4+ or Ti4+, implying that such a charge compensation mechanism does not occur, confirming that the Cr in titanate and stannate pyrochlores is mainly in a tetravalent state

    Biased opinion dynamics: when the devil is in the details

    Get PDF
    We study opinion dynamics in multi-agent networks when a bias toward one of two pos-sible opinions exists, for example reflecting a status quo versus a superior alternative. Our aim is to investigate the combined effect of bias, network structure, and opinion dynamics on the convergence of the system of agents as a whole. Models of such evolving processes can easily become analytically intractable. In this paper, we consider a simple yet mathe-matically rich setting, in which all agents initially share an initial opinion representing the status quo. The system evolves in steps. In each step, one agent selected uniformly at ran -dom follows an underlying update rule to revise its opinion on the basis of those held by its neighbors, but with a probabilistic bias towards the superior alternative. We analyze con-vergence of the resulting process under well-known update rules. The framework we pro -pose is simple and modular, but at the same time complex enough to highlight a nonobvious interplay between topology and underlying update rule.(c) 2022 The Author(s). Published by Elsevier Inc. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/)
    • …
    corecore