5,877 research outputs found
Neutron detector simultaneously measures fluence and dose equivalent
Neutron detector acts as both an area monitoring instrument and a criticality dosimeter by simultaneously measuring dose equivalent and fluence. The fluence is determined by activation of six foils one inch below the surface of the moderator. Dose equivalent is determined from activation of three interlocked foils at the center of the moderator
Rapid Mixing for Lattice Colorings with Fewer Colors
We provide an optimally mixing Markov chain for 6-colorings of the square
lattice on rectangular regions with free, fixed, or toroidal boundary
conditions. This implies that the uniform distribution on the set of such
colorings has strong spatial mixing, so that the 6-state Potts antiferromagnet
has a finite correlation length and a unique Gibbs measure at zero temperature.
Four and five are now the only remaining values of q for which it is not known
whether there exists a rapidly mixing Markov chain for q-colorings of the
square lattice.Comment: Appeared in Proc. LATIN 2004, to appear in JSTA
Ablation debris control by means of closed thick film filtered water immersion
The performance of laser ablation generated debris control by means of open immersion techniques have been shown to be limited by flow surface ripple effects on the beam and the action of ablation plume pressure loss by splashing of the immersion fluid. To eradicate these issues a closed technique has been developed which ensured a controlled geometry for both the optical interfaces of the flowing liquid film. This had the action of preventing splashing, ensuring repeatable machining conditions and allowed for control of liquid flow velocity. To investigate the performance benefits of this closed immersion technique bisphenol A polycarbonate samples have been machined using filtered water at a number of flow velocities. The results demonstrate the efficacy of the closed immersion technique: a 93% decrease in debris is produced when machining under closed filtered water immersion; the average debris particle size becomes larger, with an equal proportion of small and medium sized debris being produced when laser machining under closed flowing filtered water immersion; large debris is shown to be displaced further by a given flow velocity than smaller debris, showing that the action of flow turbulence in the duct has more impact on smaller debris. Low flow velocities were found to be less effective at controlling the positional trend of deposition of laser ablation generated debris than high flow velocities; but, use of excessive flow velocities resulted in turbulence motivated deposition. This work is of interest to the laser micromachining community and may aide in the manufacture of 2.5D laser etched patterns covering large area wafers and could be applied to a range of wavelengths and laser types
Gravitational lens optical scalars in terms of energy-momentum distributions
This is a general work on gravitational lensing. We present new expressions
for the optical scalars and the deflection angle in terms of the
energy-momentum tensor components of matter distributions. Our work generalizes
standard references in the literature where normally stringent assumptions are
made on the sources. The new expressions are manifestly gauge invariant, since
they are presented in terms of curvature components. We also present a method
of approximation for solving the lens equations, that can be applied to any
order.Comment: 17 pages, 2 figures. Titled changed. Small improvements. References
added. Final version published in Phys.Rev.
Quantum speedup of classical mixing processes
Most approximation algorithms for #P-complete problems (e.g., evaluating the
permanent of a matrix or the volume of a polytope) work by reduction to the
problem of approximate sampling from a distribution over a large set
. This problem is solved using the {\em Markov chain Monte Carlo} method: a
sparse, reversible Markov chain on with stationary distribution
is run to near equilibrium. The running time of this random walk algorithm, the
so-called {\em mixing time} of , is as shown
by Aldous, where is the spectral gap of and is the minimum
value of . A natural question is whether a speedup of this classical
method to , the diameter of the graph
underlying , is possible using {\em quantum walks}.
We provide evidence for this possibility using quantum walks that {\em
decohere} under repeated randomized measurements. We show: (a) decoherent
quantum walks always mix, just like their classical counterparts, (b) the
mixing time is a robust quantity, essentially invariant under any smooth form
of decoherence, and (c) the mixing time of the decoherent quantum walk on a
periodic lattice is , which is indeed
and is asymptotically no worse than the
diameter of (the obvious lower bound) up to at most a logarithmic
factor.Comment: 13 pages; v2 revised several part
Generalized Swiss-cheese cosmologies: Mass scales
We generalize the Swiss-cheese cosmologies so as to include nonzero linear
momenta of the associated boundary surfaces. The evolution of mass scales in
these generalized cosmologies is studied for a variety of models for the
background without having to specify any details within the local
inhomogeneities. We find that the final effective gravitational mass and size
of the evolving inhomogeneities depends on their linear momenta but these
properties are essentially unaffected by the details of the background model.Comment: 10 pages, 14 figures, 1 table, revtex4, Published form (with minor
corrections
Fine Structures of Shock of SN 1006 with the Chandra Observation
The north east shell of SN 1006 is the most probable acceleration site of
high energy electrons (up to ~ 100 TeV) with the Fermi acceleration mechanism
at the shock front. We resolved non-thermal filaments from thermal emission in
the shell with the excellent spatial resolution of Chandra. The thermal
component is extended widely over about ~ 100 arcsec (about 1 pc at 1.8 kpc
distance) in width, consistent with the shock width derived from the Sedov
solution. The spectrum is fitted with a thin thermal plasma of kT = 0.24 keV in
non-equilibrium ionization (NEI), typical for a young SNR. The non-thermal
filaments are likely thin sheets with the scale widths of ~ 4 arcsec (0.04 pc)
and ~ 20 arcsec (0.2 pc) at upstream and downstream, respectively. The spectra
of the filaments are fitted with a power-law function of index 2.1--2.3, with
no significant variation from position to position. In a standard diffusive
shock acceleration (DSA) model, the extremely small scale length in upstream
requires the magnetic field nearly perpendicular to the shock normal. The
injection efficiency (eta) from thermal to non-thermal electrons around the
shock front is estimated to be ~ 1e-3 under the assumption that the magnetic
field in upstream is 10 micro G. In the filaments, the energy densities of the
magnetic field and non-thermal electrons are similar to each other, and both
are slightly smaller than that of thermal electrons. in the same order for each
other. These results suggest that the acceleration occur in more compact region
with larger efficiency than previous studies.Comment: 24 pages, 11 figures, Accepted for publication in ApJ, the paper with
full resolution images in
http://www-cr.scphys.kyoto-u.ac.jp/member/bamba/Paper/SN1006.pd
- âŠ