Electromagnetic wave absorption and structural properties of wide-band absorber made of graphene-printed glass-fibre composite

Lightweight composites combining electromagnetic wave absorption and excellent mechanical properties are required in spacecraft and aircraft. A one- dimensional metamaterial absorber consisting of a stack of glass fibre/epoxy layers and graphene nanoplatelets/epoxy films was proposed and fabricated through a facile air-spraying based printing technology and a liquid resin infusion method. The production process allows an optimum dispersion of graphene nanoplatelets, promoting adhesion and mechanical integration of the glass fibre/epoxy layers with the graphene nanoplatelets/epoxy films. According to experimental results, the proposed wide-band absorber provides a reflection coefficient lower than −10 dB in the range 8.5–16.7 GHz and an improvement of flexural modulus of more than 15%, with a total thickness of ∼1 mm. Outstanding electromagnetic wave absorption and mechanical performance make the proposed absorber more competitive in aeronautical and aerospace applications

Pressure tensor in the presence of velocity shear: stationary solutions and self-consistent equilibria

Observations and numerical simulations of laboratory and space plasmas in almost collisionless regimes reveal anisotropic and non-gyrotropic particle distribution functions. We investigate how such states can persist in the presence of a sheared flow. We focus our attention on the pressure tensor equation in a magnetized plasma and derive analytical self-consistent plasma equilibria which exhibit a novel asymmetry with respect to the magnetic field direction. These results are relevant for investigating, within fluid models that retain the full pressure tensor dynamics, plasma configurations where a background shear flow is present.Comment: 13 pages, 7 figure

Workers’ exposure assessment during the production of graphene nanoplatelets in r&d laboratory

Widespread production and use of engineered nanomaterials in industrial and research settings raise concerns about their health impact in the workplace. In the last years, graphene-based nanomaterials have gained particular interest in many application fields. Among them, graphene nanoplatelets (GNPs) showed superior electrical, optical and thermal properties, low-cost and availability. Few and conflicting results have been reported about toxicity and potential effects on workers’ health, during the production and handling of these nanostructures. Due to this lack of knowledge, systematic approaches are needed to assess risks and quantify workers’ exposure to GNPs. This work applies a multi-metric approach to assess workers’ exposure during the production of GNPs, based on the Organization for Economic Cooperation and Development (OECD) methodology by integrating real-time measurements and personal sampling. In particular, we analyzed the particle number concentration, the average diameter and the lung deposited surface area of airborne nanoparticles during the production process conducted by thermal exfoliation in two different ways, compared to the background. These results have been integrated by electron microscopic and spectroscopic analysis on the filters sampled by personal impactors. The study identifies the process phases potentially at risk for workers and reports quantitative information about the parameters that may influence the exposure in order to propose recommendations for a safer design of GNPs production process

Electrocatalytic properties of Pd-based nano-structured material for application in fuel cells

Fuel cells, especially low temperature fuel cells, are clean-energy devices that have high potentiality for use in electric power production and non-polluting vehicles. Platinum is commonly used as electrocatalysts in fuel cell electrodes, because of its excellent electrocatalytic activity and chemical stability. But, because of its high cost and limited resources, its use represents a bottleneck for large-scale application and commercialization of fuel cells. Palladium could be a good substitute for Pt, because of its similar chemical and physical properties, lower cost and higher abundance. Main challenges concern the development of Pd-based materials with high catalytic activity and durability at a reduced cost (i.e. metal content). Crucial technological issue is the optimization of the active surface of the catalysts, by the control of the morphology, shape and dispersion of the metal particles. The talk will describe the main results of the research activity carried out during the second year of the Italia-USA Bilateral Project in ENEA, concerning the fabrication and characterization of different kinds of nanostructured Pd-based electrocatalysts, by using both electrochemical and vacuum thin film deposition techniques

Search for Neutron Flux Generation in a Plasma Discharge Electrolytic Cell

Following some recent unexpected hints of neutron production in setups like high-voltage atmospheric discharges and plasma discharges in electrolytic cells, we present a measurement of the neutron flux in a configuration similar to the latter. We use two different types of neutron detectors, poly-allyl-diglicol-carbonate (PADC, aka CR-39) tracers and Indium disks. At 95% C.L. we provide an upper limit of 1.5 neutrons cm^-2 s^-1 for the thermal neutron flux at ~5 cm from the center of the cell. Allowing for a higher energy neutron component the largest allowed flux is 64 neutrons cm^-2 s^-1. This upper limit is two orders of magnitude smaller than what previously claimed in an electrolytic cell plasma discharge experiment. Furthermore the behavior of the CR-39 is discussed to point our possible sources of spurious signals.Comment: 4 pages, 3 figure

Diagnóstico mediante PCR-duplex de la nueva variante RHDVb del virus de la enfermedad hemorrágica en conejos

Publishe