299 research outputs found
Proposal for Higgs and Superpartner Searches at the LHCb Experiment
The spectrum of supersymmetric theories with R-parity violation are much more
weakly constrained than that of supersymmetric theories with a stable
neutralino. We investigate the signatures of supersymmetry at the LHCb
experiment in the region of parameter space where the neutralino decay leaves a
displaced vertex. We find sensitivity to squark production up to squark masses
of order 1 TeV. We note that if the Higgs decays to neutralinos in this
scenario, LHCb should see the lightest Higgs boson before ATLAS and CMS.Comment: 7 pages, 5 figure
Using Combinatorial Inkjet Printing for Synthesis and Deposition of Metal Halide Perovskites in Wavelength‐Selective Photodetectors
Metal halide perovskites have received great attention in recent years, predominantly due to the high performance of perovskite solar cells. The versatility of the material, which allows the tunability of the bandgap, has led to its use in light-emitting diodes, photo, and X-ray detectors, among other optoelectronic device applications. Specifically in photodetectors, the tunability of the bandgap allows fabrication of spectrally selective devices. Utilizing a combinatorial inkjet printing approach, multiple perovskite compositions absorbing at specific wavelengths in a single printing step are fabricated. The drop-on-demand capabilities of inkjet printing enable the deposition of inks in a precise ratio to produce specific perovskite compositions in the printed thin film. By controlling the halide ratio in the compositions, a mixed halide gradient ranging from pure MAPbI3 via MAPbBr3 to MAPbCl3 is produced. The tunability in the absorption onset from 410 to 790 nm is demonstrated, covering the whole visible spectrum, with a precision of 8 nm steps for MAPb(BrxCl1−x)3 compositions. From this range of mixed halide perovskites, photodetectors which show spectral selectivity corresponding to the measured absorption onset are demonstrated, paving the way for use in a printed visible light spectrometer without the need for a dispersion element.Peer Reviewe
Finally, inkjet printed metal halide perovskite LEDs utilizing seed crystal templating of salty PEDOT PSS
Solution processable metal halide perovskites are increasingly implemented in perovskite based light emitting diodes PeLEDs . Especially green PeLEDs based on methylammonium lead bromide MAPbBr3 composites exhibit impressive optoelectronic properties, while allowing processing by low cost and upscalable printing methods. In this study, we have investigated the influence of potassium chloride KCl blended into the common hole injection material poly 3,4 ethylenedioxythiophene polystyrene sulfonate PEDOT PSS to boost PeLED device performance. The inclusion of KCl firstly results in a change in morphology of the PEDOT PSS layer, which then acts as a template during deposition of the perovskite layer. A MAPbBr3 polyethylene glycol PEG composite was used, which does not require the deposition of an anti solvent droplet to induce preferential perovskite crystallization and is therefore suitable for spin coating and scalable inkjet printing processes. PeLEDs utilizing the KCl induced templating effect on a planar PEDOT PSS MAPbBr3 PEG architecture show improved performance, predominantly due to improved crystallization. PeLEDs incorporating spin coated perovskite layers yield a 40 fold increase in luminance 8000 cd m 2 while the turn on voltage decreases to 2.5 V. KCl modified PEDOT PSS contact layers enabled the realization of inkjet printed PeLEDs with luminance increased by a factor of 20 at a maximum of 4000 cd m 2 and a turn on voltage of 2.5 V. This work paves the way for inkjet printed perovskite light emitting devices for a wide variety of low cost and customizable application
Direct Probing of Gap States and Their Passivation in Halide Perovskites by High-Sensitivity, Variable Energy Ultraviolet Photoelectron Spectroscopy
Direct detection of intrinsic defects in halide perovskites (HaPs) by standard methods utilizing optical excitation is quite challenging, due to the low density of defects in most samples of this family of materials (≤10^{15} cm^{–3} in polycrystalline thin films and ≤10^{11} cm^{–3} in single crystals, except melt-grown ones). While several electrical methods can detect defect densities 2 eV) HaPs. By measuring HaP layers on both hole- and electron-contact layers, as well as single crystals without contacts, we conclude that the observed deep defects are intrinsic to the Br-based HaP, and we propose a passivation route via the incorporation of a 2D-forming ligand into the precursor solution
Gas flow assisted vacuum drying Identification of a novel process for attaining high quality perovskite films
Controlling the nucleation and crystal growth in solution processed metal halide perovskite MHP thin films is the pivotal point in fabricating homogenous and pinhole free films. Using scalable coating and printing techniques, vacuum and gas flow assisted drying processes turn out to be the most promising methods to induce nucleation and crystallization. Yet, the exact interplay and nature of these processes are unclear. In our work, we optically monitor these processes in situ. For the first time, we can show that a controlled venting of the vacuum chamber and the use of a subsequent gas flow are key to achieve homogenous nucleation. Utilizing this gas flow assisted vacuum drying process, we find that regular, optically dense and pinhole free MHP layers can be fabricated via inkjet printing, which yield solar cells with a power conversion efficiency of 16 , as compared to 4.5 for vacuum dryin
Jet Dipolarity: Top Tagging with Color Flow
A new jet observable, dipolarity, is introduced that can distinguish whether
a pair of subjets arises from a color singlet source. This observable is
incorporated into the HEPTopTagger and is shown to improve discrimination
between top jets and QCD jets for moderate to high pT.Comment: 8 pages, 6 figures (updated to JHEP version
HBV quasispecies composition in Lamivudine-failed chronic hepatitis B patients and its influence on virological response to Tenofovir-based rescue therapy
The present study sought to evaluate the structure of HBV quasispecies in Lamivudine (LMV)-failed chronic hepatitis B (CHB) patients and its impact in defining the subsequent virological responses to Tenofovir (TDF)-based rescue-therapy. By analyzing HBV clones encompassing reverse transcriptase (RT) and surface (S) region from LMV-failed and treatment-naïve CHB patients, we identified 5 classical and 12 novel substitutions in HBV/RT and 9 substitutions in immune-epitopes of HBV/S that were significantly associated with LMV failure. In silico analysis showed spatial proximity of some of the newly-identified, mutated RT residues to the RT catalytic centre while most S-substitutions caused alteration in epitope hydrophobicity. TDF administration resulted in virological response in 60% of LMV-failed patients at 24-week but non-response in 40% of patients even after 48-weeks. Significantly high frequencies of 6 S-substitutions and one novel RT-substitution, rtH124N with 6.5-fold-reduced susceptibility to TDF in vitro, were noted at baseline in TDF non-responders than responders. Follow-up studies depicted greater evolutionary drift of HBV quasispecies and significant decline in frequencies of 3 RT and 6 S-substitutions in responder-subgroup after 24-week TDF-therapy while most variants persisted in non-responders. Thus, we identified the HBV-RT/S variants that could potentially predict unfavorable response to LMV/TDF-therapy and impede immune-mediated viral clearance
Probing natural SUSY from stop pair production at the LHC
We consider the natural supersymmetry scenario in the framework of the
R-parity conserving minimal supersymmetric standard model (called natural MSSM)
and examine the observability of stop pair production at the LHC. We first scan
the parameters of this scenario under various experimental constraints,
including the SM-like Higgs boson mass, the indirect limits from precision
electroweak data and B-decays. Then in the allowed parameter space we study the
stop pair production at the LHC followed by the stop decay into a top quark
plus a lightest neutralino or into a bottom quark plus a chargino. From
detailed Monte Carlo simulations of the signals and backgrounds, we find the
two decay modes are complementary to each other in probing the stop pair
production, and the LHC with TeV and 100 luminosity is
capable of discovering the stop predicted in natural MSSM up to 450 GeV. If no
excess events were observed at the LHC, the 95% C.L. exclusion limits of the
stop masses can reach around 537 GeV.Comment: 19 pages, 10 figures, version accepted by JHE
Analytic philosophy for biomedical research: the imperative of applying yesterday's timeless messages to today's impasses
The mantra that "the best way to predict the future is to invent it" (attributed to the computer scientist Alan Kay) exemplifies some of the expectations from the technical and innovative sides of biomedical research at present. However, for technical advancements to make real impacts both on patient health and genuine scientific understanding, quite a number of lingering challenges facing the entire spectrum from protein biology all the way to randomized controlled trials should start to be overcome. The proposal in this chapter is that philosophy is essential in this process. By reviewing select examples from the history of science and philosophy, disciplines which were indistinguishable until the mid-nineteenth century, I argue that progress toward the many impasses in biomedicine can be achieved by emphasizing theoretical work (in the true sense of the word 'theory') as a vital foundation for experimental biology. Furthermore, a philosophical biology program that could provide a framework for theoretical investigations is outlined
- …