Preparation, Structure, and Reactivity of Nonstabilized Organoiron Compounds. Implications for Iron-Catalyzed Cross Coupling Reactions

A series of unprecedented organoiron complexes of the formal oxidation states −2, 0, +1, +2, and +3 is presented, which are largely devoid of stabilizing ligands and, in part, also electronically unsaturated (14-, 16-, 17- and 18-electron counts). Specifically, it is shown that nucleophiles unable to undergo β-hydride elimination, such as MeLi, PhLi, or PhMgBr, rapidly reduce Fe(3+) to Fe(2+) and then exhaustively alkylate the metal center. The resulting homoleptic organoferrate complexes [(Me4Fe)(MeLi)][Li(OEt2)]2 (3) and [Ph4Fe][Li(Et2O)2][Li(1,4-dioxane)] (5) could be characterized by X-ray crystal structure analysis. However, these exceptionally sensitive compounds turned out to be only moderately nucleophilic, transferring their organic ligands to activated electrophiles only, while being unable to alkylate (hetero)aryl halides unless they are very electron deficient. In striking contrast, Grignard reagents bearing alkyl residues amenable to β-hydride elimination reduce FeXn (n = 2, 3) to clusters of the formal composition [Fe(MgX)2]n. The behavior of these intermetallic species can be emulated by structurally well-defined lithium ferrate complexes of the type [Fe(C2H4)4][Li(tmeda)]2 (8), [Fe(cod)2][Li(dme)]2 (9), [CpFe(C2H4)2][Li(tmeda)] (7), [CpFe(cod)][Li(dme)] (11), or [Cp*Fe(C2H4)2][Li(tmeda)] (14). Such electron-rich complexes, which are distinguished by short intermetallic Fe−Li bonds, were shown to react with aryl chlorides and allyl halides; the structures and reactivity patterns of the resulting organoiron compounds provide first insights into the elementary steps of low valent iron-catalyzed cross coupling reactions of aryl, alkyl, allyl, benzyl, and propargyl halides with organomagnesium reagents. However, the acquired data suggest that such C−C bond formations can occur, a priori, along different catalytic cycles shuttling between metal centers of the formal oxidation states Fe(+1)/Fe(+3), Fe(0)/Fe(+2), and Fe(−2)/Fe(0). Since these different manifolds are likely interconnected, an unambiguous decision as to which redox cycle dominates in solution remains difficult, even though iron complexes of the lowest accessible formal oxidation states promote the reactions most effectively

Light‐Driven gem‐Hydrogenation: An Orthogonal Entry into “Second Generation” Ruthenium Carbene Catalysts for Olefin Metathesis

The newly discovered light‐driven gem‐hydrogenation of alkynes opens an unconventional yet efficient entry into five‐coordinate Grubbs‐type ruthenium carbene complexes with cis‐disposed chloride ligands. Representatives of this class featuring a chelate substructure formed by an iodo‐substituted benzylidene unit react with (substituted) 2‐isopropoxystyrene to give prototypical “second generation” Grubbs‐Hoveyda complexes for olefin metathesis. The new approach to this venerable catalyst family is safe and versatile for it uses a triple bond rather than phenyldiazomethane as the ultimate carbene source and does not require any sacrificial phosphines

Regioselective trans-Hydrostannation of Boron-Capped Alkynes

Alkynyl-B(aam) (aam=anthranilamidato) derivatives are readily available bench-stable compounds that undergo remarkably selective reactions with Bu3SnH in the presence of [Cp*RuCl]4 as the catalyst. The addition follows a stereochemically unorthodox trans-selective course; in terms of regioselectivity, the Bu3Sn- unit is delivered with high fidelity to the C-atom of the triple bond adjacent to the boracyclic head group (“alpha,trans-addition”). This outcome is deemed to reflect a hydrogen bonding interaction between the protic −NH groups of the benzo-1,3,2-diazaborininone ring system and the polarized [Ru−Cl] bond in the loaded catalyst, which locks the substrate in place in a favorable orientation relative to the incoming reagent. The resulting isomerically (almost) pure gem-dimetalated building blocks are amenable to numerous downstream functionalizations; most remarkable is the ability to subject the −B(aam) moiety to Suzuki-Miyaura cross coupling without need for prior hydrolysis while keeping the adjacent Bu3Sn- group intact. Alternatively, the tin residue can be engaged in selective tin/halogen exchange without touching the boron substituent; the fact that the two -NH entities of −B(aam) do not protonate organozinc reagents and hence do not interfere with Negishi reactions of the alkenyl halides thus formed is another virtue of this so far underutilized boracycle. Overall, the ruthenium catalyzed trans-hydrostannation of alkynyl-B(aam) derivatives opens a practical gateway to isomerically pure trisubstituted alkenes of many different substitution patterns by sequential functionalization of the 1-alkenyl-1,1-heterobimetallic adducts primarily formed

Coordination Chemistry of Ene-1,1-diamines and a Prototype "Carbodicarbene"

Carbophilic Lewis acids can polarize a coordinated π-bond by a slippage mechanism. A series of stable ylid- or enolate gold complexes of ene-1,1-diamines not only emulate this property, but also reveal the exceptional donor capacity of such electron-rich olefin ligands. Moreover, the first metal complex of a tetraaminoallene is reported, which features a prototype “carbodicarbene” ligand bound to a transition-metal template

Light-Driven Alkyne gem-Hydrogenation: An Intramolecular Approach to Hoveyda–Grubbs Catalysts

The light-driven gem-hydrogenation of internal alkynes in the presence of [(NHC)(η6-cymene)RuCl2] generates discrete ruthenium carbene complexes. When applied to appropriately designed enyne substrates, the reactive intermediates thus formed will engage the tethered olefin in metathetic ring closure while splitting off a Hoveyda–Grubbs-type complex as secondary carbene. This unconventional approach to these classical catalysts for olefin metathesis rivals existing methodology in that it is safe, short, phosphine-free, and uses readily available starting materials

Total Synthesis of Tulearin C

With the help of the smaller brother: Although alkyne metathesis will always be the little brother of alkene metathesis, it allows problems to be solved that are currently beyond reach of the more famous sibling. This notion is exemplified by the tulearin macrolides, which could only be selectively forged by ring-closing alkyne metathesis (RCAM)/trans reduction using the latest generation of alkyne metathesis catalysts

A New Ligand Design Based on London Dispersion Empowers Chiral Bismuth–Rhodium Paddlewheel Catalysts

Heterobimetallic bismuth–rhodium paddlewheel complexes with phenylglycine ligands carrying TIPS-groups at the meta-positions of the aromatic ring exhibit outstanding levels of selectivity in reactions of donor/acceptor and donor/donor carbenes; at the same time, the reaction rates are much faster and the substrate scope is considerably wider than those of previous generations of chiral [BiRh] catalysts. As shown by a combined experimental, crystallographic, and computational study, the new catalysts draw their excellent application profile largely from the stabilization of the chiral ligand sphere by London dispersion (LD) interactions of the peripheral silyl substituents

Preparation, Modification, and Evaluation of Cruentaren A and Analogues

An expeditious total synthesis of the highly cytotoxic F-ATPase inhibitor cruentaren A (1) is described based on a ring-closing alkyne metathesis (RCAM) reaction for the formation of the macrocylic ring. Other key transformations comprise a C-acylation of the benzyl lithium reagent derived from orsellinic acid ester 9 with Weinreb amide 7, a CBS reduction of the resulting ketone 10, and a Soderquist propargylation of aldehyde 21 with allenylborane (S)-27 to set the C-15 chiral center of the required alcohol fragment 25. The RCAM precursor 33 was assembled by acylation of 25 with acid fluoride 32, since more conventional methods for ester bond formation were unproductive. Moreover, the choice of the protecting groups, in particular for the secondary alcohol at C-9, which is prone to engage in translactonization, turned out to be critical; a relatively stable TBDPS ether had to be chosen for this site, which was removed in the final step of the synthesis with aqueous HF since other fluoride sources met with failure. The successful synthetic route was then expanded beyond the natural product, bringing a series of analogues into reach that feature incremental but deep-seated structural modifications. Three of these fully synthetic compounds turned out to be as or even more cytotoxic than cruentaren A itself against L-929 mouse fibroblast cells, reaching IC50 values as low as 0.7 ng mL−1

Optimized Synthesis, Structural Investigations, Ligand Tuning and Synthetic Evaluation of Silyloxy-Based Alkyne Metathesis Catalysts

Nitride- and alkylidyne complexes of molybdenum endowed with triarylsilanolate ligands are excellent (pre)catalysts for alkyne-metathesis reactions of all sorts, since they combine high activity with an outstanding tolerance toward polar and/or sensitive functional groups. Structural and reactivity data suggest that this promising application profile results from a favorable match between the characteristics of the high-valent molybdenum center and the electronic and steric features of the chosen Ar3SiO groups. This interplay ensures a well-balanced level of Lewis acidity at the central atom, which is critical for high activity. Moreover, the bulky silanolates, while disfavoring bimolecular decomposition of the operative alkylidyne unit, do not obstruct substrate binding. In addition, Ar3SiO groups have the advantage that they are more stable within the coordination sphere of a high-valent molybdenum center than tert-alkoxides, which commonly served as ancillary ligands in previous generations of alkyne metathesis catalysts. From a practical point of view it is important to note that complexes of the general type [(Ar3SiO)3MoΞX] (X = N, CR; R = aryl, alkyl, Ar = aryl) can be rendered air-stable with the aid of 1,10-phenanthroline, 2,2′-bipyridine or derivatives thereof. Although the resulting adducts are themselves catalytically inert, treatment with Lewis acidic additives such as ZnCl2 or MnCl2 removes the stabilizing N-donor ligand and gently releases the catalytically active template into the solution. This procedure gives excellent results in alkyne metathesis starting from air-stable and hence user-friendly precursor complexes. The thermal and hydrolytic stability of representative molybdenum alkylidyne and -nitride complexes of this series was investigated and the structure of several decomposition products elucidated

A Cheap Metal for a "Noble" Task: Preparative and Mechanistic Aspects of Cycloisomerization and Cycloaddition Reactions Catalyzed by Low-Valent Iron Complexes

Reaction of ferrocene with lithium in the presence of either ethylene or COD allows the Fe(0)-ate complexes 1 and 4 to be prepared on a large scale, which turned out to be excellent catalysts for a variety of Alder-ene, [4+2], [5+2], and [2+2+2] cycloadditon and cycloisomerization reactions of polyunsaturated substrates. The structures of ferrates 1 and 4 in the solid-state reveal the capacity of the reduced iron center to share electron density with the ligand sphere. This feature, coupled with the kinetic lability of the bound olefins, is thought to be responsible for the ease with which different enyne or diyne substrates undergo oxidative cyclization as the triggering event of the observed skeletal reorganizations. This mechanistic proposal is corroborated by highly indicative deuterium labeling experiments. Moreover, it was possible to intercept two different products of an oxidative cyclization manifold with the aid of the Fe(+1) complex 6, which, despite its 17-electron count, also turned out to be catalytically competent in certain cases. The unusual cyclobutadiene complex 38 derived from 6 and tolane was characterized by X-ray crystallography