742 research outputs found
Inverse problems for Schrodinger equations with Yang-Mills potentials in domains with obstacles and the Aharonov-Bohm effect
We study the inverse boundary value problems for the Schr\"{o}dinger
equations with Yang-Mills potentials in a bounded domain
containing finite number of smooth obstacles . We
prove that the Dirichlet-to-Neumann operator on determines
the gauge equivalence class of the Yang-Mills potentials. We also prove that
the metric tensor can be recovered up to a diffeomorphism that is identity on
.Comment: 15 page
Distribution of some elements in Veronica scutellata L. from Bolu,Turkey: soil-plant interactions
Veronica scutellata L. occurs in moist and wet habitats, such as ponds, marshes and other wetlands. This study was conducted on this species to examine its mineral element uptake status in terms of interactions between soil and plant. Experimental materials were taken from the Southern coast of Black Sea at coordinates 40º36’N and 31º16’E at an altitude of 1400 m above sea level from Bolu – Turkey; using standard methods and plant (root, stem and leaf parts) and soil mineral element measurements (Al, B, Ca, Cu, Fe, K, Mg, Mn, Na, Ni and Zn) were done. During the study, ICP-OES was employed for the measurement of mineral elements. It was observed that considerable amounts of B, Ca, K, Mg, Mn, Na and Zn are accumulated by the plant
Effect of V and N on the microstructure evolution during continuous casting of steel
Low Carbon (LC) steel is not expected to be sensitive to hot tearing and/or cracking while microalloyed steels are known for their high cracking sensitivity during continuous casting. Experience of the Direct Sheet Plant caster at Tata Steel in Ijmuiden (the Netherlands), seems to contradict this statement. It is observed that a LC steel grade has a high risk of cracking alias hot tearing, while a High Strength Low Alloyed (HSLA) steel has a very low cracking occurrence. Another HSLA steel grade, with a similar composition but less N and V is however very sensitive to hot tearing. An extreme crack results in a breakout. A previous statistical analysis of the breakout occurrence reveals a one and a half times higher possibility of a breakout for the HSLA grade compared to the LC grade. HSLA with extra N, V shows a four times smaller possibility of breakout than LC. This study assigns the unexpected effect of the chemical composition on the hot tearing sensitivity to the role of some alloying elements such as V and N as structure refiners.This research was carried out under project number M41.5.08320 within the framework of the
Research Program of the Materials innovation institute M2i (www.m2i.nl)
Modeling of primary dendrite arm spacing variations in thin-slab casting of low carbon and low alloy steels
Solidification structure of a High Strength Low Alloy (HSLA) steel, in terms of dendrite arm spacing distribution across the shell thickness, is studied in a breakout shell from a thin-slab caster at Tata Steel in IJmuiden. Columnar dendrites were found to be the predominant morphology throughout the shell with size variations across the shell thickness. Primary Dendrite Arm Spacing (PDAS) increases by increasing the distance from meniscus or slab surface. Subsequently, a model is proposed to describe the variation of the PDAS with the shell thickness (the distance from slab surface) under solidifiction conditions experienced in the primary cooling zone of thin-slab casting. The proposed relationship related the PDAS to the shell thickness and, hence, can be used as a tool for predicting solidifcation structure and optimizing the thin-slab casting of low alloy steels
Sum of Lyapunov exponents of the Hodge bundle with respect to the Teichmuller geodesic flow
We compute the sum of the positive Lyapunov exponents of the Hodge bundle
with respect to the Teichmuller geodesic flow. The computation is based on the
analytic Riemann-Roch Theorem and uses a comparison of determinants of flat and
hyperbolic Laplacians when the underlying Riemann surface degenerates.Comment: Minor corrections. To appear in Publications mathematiques de l'IHE
Dynamics of two interacting hydrogen bubbles in liquid aluminium under the influence of a strong acoustic field
Ultrasonic melt processing significantly improves the properties of metallic materials. However, this promising technology has not been successfully transferred to the industry because of difficulties in treating large volumes of melt. To circumvent these difficulties, a fundamental understanding of the efficiency of ultrasonic treatment of liquid metals is required. In this endeavor, the dynamics of two interacting hydrogen bubbles in liquid aluminum are studied to determine the effect of a strong acoustic field on their behavior. It is shown that coalescence readily occurs at low frequencies in the range of 16 to 20 kHz; forcing frequencies at these values are likely to promote degassing. Emitted acoustic pressures from relatively isolated bubbles that resonate with the driving frequency are in the megapascal range and these cavitation shock waves are presumed to promote grain refinement by disrupting the growth of the solidification front
Development Of Al-B-C Master Alloy Under External Fields
This study investigates the application of external fields in the development of an Al-B-C alloy, with the aim of synthesizing in situ Al3BC particles. A combination of ultrasonic cavitation and distributive mixing was applied for uniform dispersion of insoluble graphite particles in the Al melt, improving their wettability and its subsequent incorporation into the Al matrix. Lower operating temperatures facilitated the reduction in the amount of large clusters of reaction phases, with Al3BC being identified as the main phase in XRD analysis. The distribution of Al3BC particles was quantitatively evaluated. Grain refinement experiments reveal that Al-B-C alloy can act as a master alloy for Al-4Cu and AZ91D alloys, with average grain size reduction around 50% each at 1wt%Al-1.5B-2C additions
Circadian Organization in Hemimetabolous Insects
The circadian system of hemimetabolous insects is reviewed in respect to the locus of the circadian clock and multioscillatory organization. Because of relatively easy access to the nervous system, the neuronal organization of the clock system in hemimetabolous insects has been studied, yielding identification of the compound eye as the major photoreceptor for entrainment and the optic lobe for the circadian clock locus. The clock site within the optic lobe is inconsistent among reported species; in cockroaches the lobula was previously thought to be a most likely clock locus but accessory medulla is recently stressed to be a clock center, while more distal part of the optic lobe including the lamina and the outer medulla area for the cricket. Identification of the clock cells needs further critical studies. Although each optic lobe clock seems functionally identical, in respect to photic entrainment and generation of the rhythm, the bilaterally paired clocks form a functional unit. They interact to produce a stable time structure within individual insects by exchanging photic and temporal information through neural pathways, in which
serotonin and pigment-dispersing factor (PDF) are involved as chemical messengers. The mutual interaction also plays an important role in seasonal adaptation of the rhythm
Autekologi dan Fisiologi Percambahan Centaurea kilaea Boiss. dari Turki
In this study germination requirements, plant-soil interactions and population biology of Centaurea kilaea was studied. The plant and soil samples were collected from Sofular Village (Sile District) and shore of Çatalca District (Istanbul) in Turkey by using standard methods. Methods like Scheibler, Wetdigestion, Kjeldahl and Olsen were employed for measurement of soil texture, structure and other physical and chemical characteristics (pH, total protein and electrical conductivity) using spectrophotometer, flame photometer, calcimeter and ICP. The results showed that ranges of different elements in the soil were 0.007-0.2% for N, 0.0007-0.001% for P, 0.001-0.01% for K, 0.0001-0.0002 % for Na. N, P, K and Na values in the plants were 2.17, 0.005, 0.1 and 0.006%, respectively. The data revealed that germination success of the seeds was influenced by the environmental factors such as pH, germination season and temperature.Dalam kajian ini keperluan percambahan, saling tindakan tumbuhan-tanih dan biologi populasi Centaurea kilaea telah dilakukan. Sampel tumbuhan dan tanih telah dikumpul dari Kampung Sofular (Daerah Şile) dan pantai Daerah Çatalca (Istanbul) di Turki dengan menggunakan kaedah piawai. Kaedah seperti Scheibler, Wetdigestion, Kjeldahl dan Olsen telah digunakan bagi pengukuran tekstur tanih, struktur dan sifat fizikal dan kimia lain (pH, jumlah protein dan kekonduksian elektrik) menggunakan spektrofotometer, fotometer api, kalsimeter dan ICP. Hasil menunjukkan bahawa julat unsur berbeza dalam tanih ialah 0.007-0.2% bagi N, 0.0007-0.001% bagi P, 0.001-0.01% bagi K, 0.0001-0.0002% bagi Na. N, P, K dan nilai Na dalam tumbuhan ialah masing-masing 2.17, 0.005, 0.1 dan 0.006%. Data menunjukkan kejayaan percambahan bagi biji benih telah dipengaruhi faktor persekitaran seperti pH, musim percambahan dan suhu
- …