Microbial electromethanogenesis for energy storage: Influence of acidic pH on process performance

[EN] Microbial electromethanogenesis (EM) has positioned itself as a promising technology for electrical energy storage using CO2 as a feedstock. However, the selectivity of the final product remains a challenge, being highly dependent of the operating conditions (temperature, pH, conductivity, etc.). This study tries to understand the role that pH plays on the start-up, performance and the structure of microbial communities of an EM system. To that end, two EM reactors were started at pH 7.0 and 5.5 respectively and were subsequently subjected to pH variations between 7.5 and 3.5. The reactor inoculated at pH 5.5 started to produce CH4 earlier than that inoculated at pH 7.0, and the acetogenic activity was gradually displaced by methanogenesis during the start-up period, regardless of the pH. In addition, as the pH of the catholyte became more acidic, the performance improved in terms of methane production, current density and columbic efficiency. Acidic environments – pH around 4.5 – promoted higher methane production due to the selection of Methanobacterium, an acid-tolerant hydrogenotrophic archaea. When pH was set at 3.5, the overall performance declined sharply, probably because it induced unfavourable physiological conditions.SIMinisterio de Ciencia e Innovació

Comparison of different biocathode start-up strategies and evaluation of their microbial community

As most of you know, carbon capture and utilisation is one of the major challenges in Environmental engineering nowadays. Several novel ideas have been proposed to generate chemicals from CO2, one of them is microbial electrosynthesis. CO2 electroreduction opens a wide viriety of posibilities to produce chemicals such as carboxylic acids or combustible gases. This goal can be achieved in a biocathode using a mixed or pure culture biofilm. This technology is currently in the first stages of development showing promising results. This research was possible thanks to the financial support of the ‘Ministerio de Economía y Competitividad’ project ref: CTQ2015-68925-R, cofinanced by FEDER funds. Ana Sotres thanks the regional ‘Junta de Castilla y León’ for the postdoctoral contract associated with project ref: LE060U16, cofinanced by FEDER fund

Alternative start-up strategies for the Bioelectrosynthesis of acetate

Carbon capture and utilization at biocathodes provides a solution to minimize CO2 emissions meanwhile commodity chemicals are being generating from an inexpensive substrate. The aim of this work is to develop biocathodes for MES systems capable of making use of CO2 in order to generate valuable chemicals. The biocathodes were inoculated using two different inocula and following two different strategies. These different start-up conditions showed distinct electrical behavior in three of the four cases. These microbial electro-synthesis systems (MES) were capable of achieving an acetic acid production between 70-196mg/L depending on the strategy. The use of a river mud inoculum resulted in a sharp enrichment, and when the potential was invert to force it to work as a biocathode, the biofilm got mostly specific in acetic acid producing bacteria, Acterobacteraceae, and some hydrogen generating bacteria. The hydrogenotrophic methanogen Methanobacteriaceae, was the only family identified on the cathode. However, the use of an anaerobic digestion inoculum resulted in a highly diverse biofilm and in a lower acetic acid production with hydrogen detected. The Archaeal population was inhibited under this condition. To conclude it is observed that specialisation of biofilm in certain Eubacterial families improves bioelectrosynthesis, and acetic acid production in particular. In addition, it is highlighted that being the Archaeal community quite similar within both biofilms, the dominant families on the cathode biofilms were drastically different, likely due to the difference in the Eubacterial microorganisms. Thanks “Junta de Castilla y Leon” for postdoctoral contract associated to project ref: LE060U16. The authors acknowledge the funding of the Spanish “Ministerio de Economía y Competitividad” via project CTQ2015-68925-R

Electromethanogenesis at medium-low temperatures: Impact on performance and sources of variability

.In this study we aimed to understand the impact of medium–low temperatures on the two main steps that usually comprise the electromethanogenesis (EM) process: electrothrophic hydrogenesis and hydrogenothrophic methanogenesis. Results revealed that pure CO2 could effectively be converted into a high-purity biogas (∼90:10 CH4/CO2) at 30 °C. However, when temperature was reduced to 15 °C, methane richness greatly decreased (∼40:60 CH4/CO2). This deterioration in performance was mostly attributed to a decline in methanogenic activity (represented mainly by Methanobacterium and Methanobrevibacter). In contrast, the hydrogenic activity (mostly Desulfomicrobium) did not suffer any significant decay. Results also seemed to indicate that methanogenesis, rather than hydrogenesis, is the main source of variability in EM. Increasing the temperature again to 30 °C restored previous performance, which highlights the resilience of EM to wide temperature fluctuations (from 30 to 15 and back 30 °C).S

Charge storage capacity of electromethanogenic biocathodes

[EN] Methanogenic biocathodes (MB) can convert CO2 and electricity into methane. This feature, that allows them to potentially be used for long-term electrical energy storage, has aroused great interest during the past 10 years. MB can also operate as biological supercapacitors, a characteristic that can be exploited for short-term energy storage and that has received much less attention. In this study, we investigate the electrical charge storage capabilities of carbon-felt-based MB modified with graphene oxide. The charge-discharge experiments revealed that the potential of the electrode plays an important role during the discharging period: low potentials (−1.2 V vs Ag/AgCl) created an inrush of faradaic current that masked any capacitive current. At more positive potentials (−0.8 V vs Ag/AgCl), the biological electrodes were outperformed by the abiotic electrodes, and only when the potential was set at −1.0 V vs Ag/AgCl the graphene-modified biological electrode showed its superior charge storage capacity. Overall, results indicated that the graphene modification is crucial to obtain bioelectrodes with improved capacitance: untreated bioelectrodes showed a charge storage capacity inferior to that measured in the abiotic electrodes.SIMCIN/AEI/10.13039/501100011033European Union NextGenerationEU/PRT

Electromethanogenesis for the conversion of hydrothermal carbonization exhaust gases into methane

[EN] Hydrothermal carbonization (HTC) is a biomass conversion process that generates a CO2-rich gaseous phase that is commonly released directly into the atmosphere. Microbial electromethanogeneis (EM) can potentially use this off-gas to convert the residual CO2 into CH4, thus avoiding GHG emissions while adding extra value to the overall bioprocess. In the present work, the HTC gas phase was fed to two mixed-culture biocathodes (replicates) polarized at −1.0V vs. Ag/AgCl. Compared to pure CO2, HTC gas had a marked negative effect on the process, decreasing current density by 61%, while maximum CH₄ yield contracted up to 50%. HTC also had an unequal impact on the cathodic microbial communities, with the methanogenic hydrogenotrophic archaea Methanobacteriaceae experiencing the largest decline. Despite that, the present study demonstrates that HTC can be used in EM as a raw material to produce a biogas with a methane content of up to 70%.S

Understanding nitrogen recovery from wastewater with a high nitrogen concentration using microbial electrolysis cells

9 p.This study was aimed at understanding the effect of applied voltage, catholyte and reactor scale on nitrogen recovery from two different organic wastes (digestate and pig slurry) by means of microbial electrolysis cell (MEC) technology. For this purpose, MEC sizes of 100, 500 and 1000 mL were tested at applied voltages of 0.6, 1 and 1.4 V using either a phosphate-buffered solution or NaCl solution as the catholyte. By increasing the reactor size from 500 mL to 1000 mL, a decrease in the ammonia recovery efficiency from 47 to 42 % was observed. The results also showed that the phosphate-buffered solution is preferable as the catholyte and that the voltage applied does not have a noticeable effect on current production and ammonia recovery. Low biodegradability of the wastes was identified as the main bottleneck. This research was supported by the European Union Horizon 2020 Research and Innovation Programme (GA nº 668128-Newfert-H2020-BBI-PPP-2014-1). Financing: This project has received funding from the Bio Based Industries Joint Undertaking under the European Union’s Horizon 2020 research and innovation programme under grant agreement No 66812

Graphene oxide electrodeposited electrode enhances start-up and selective enrichment of exoelectrogens in bioelectrochemical systems

15 p.This study seeks to assess the impact that the anodic electrodeposition of graphene oxide (GO) has on the start-up process and on the development of microbial communities on the anode of BESs. The GO electrodeposited electrodes were characterised in abiotic conditions to verify the extent of the modifcation and were then transferred to a bioelectrochemical reactor. Results showed that the modifed electrode allowed for a reduced start-up time compared to the control electrode. After three months, high throughput sequencing was performed, revealing that electrochemically reduced graphene oxide acts as a selective agent toward exoelectrogenic bacteria as Geobacter. Overall, this study shows that GO modifed electrodes enhance bioflm build up in BES. This research was possible thanks to the financial support of the ‘Ministerio de Economía y Competitividad’ project ref: CTQ2015-68925-R, cofinanced by FEDER funds. Ana Sotres thanks the regional ‘Junta de Castilla y León’ for the postdoctoral contract associated with project ref: LE060U16, cofinanced by FEDER fundsS

Elucidating the impact of power interruptions on microbial electromethanogenesis

Preprint. Submitted version[EN] The need to accommodate power fluctuations intrinsic to high-renewable systems will demand in the future the implementation of large quantities of energy storage capacity. Electromethanogenesis (EM) can potentially absorb the excess of renewable energy and store it as CH4. However, it is still unknown how power fluctuations impact on the performance of EM systems. In this study, power gaps from 24 to 96 h were applied to two 0.5 L EM reactors to assess the effect of power interruptions on current density, methane production and current conversion efficiency. In addition, the cathodes where operated with and without external H2 supplementation during the power-off periods to analyse how power outages affect the two main metabolic stages of the EM (i.e.: the hydrogenic and methanogenic steps). Methane production rates kept around 1000 mL per m2 of electrode and per day regardless of the duration of the power interruptions and of the supplementation of hydrogen. Interestingly, current density increased in the absence of hydrogen (averaged current density during hydrogen supplementation was 0.36 A·m-2 , increasing up to 0.58 A·m-2 without hydrogen). However current was less efficiently used in the production of methane with no hydrogen supplementation. Nevertheless, when the electrical power was restored after the power interruption experiments, performance parameters were similar to those observed before. These results indicate that EM is resilient to power fluctuations, which reinforces the opportunity of using EM as a technology for renewable energy storage.N

Integrating microbial electrochemical technologies with anaerobic digestion to accelerate propionate degradation

[EN] The aim of this study is to evaluate the integration of microbial electrochemical technologies (MET) with anaerobic digestion (AD) to overcome AD limitations caused by propionate accumulation. The study focuses on understanding to what extent the inoculum impacts on the behaviour of the integrated systems (AD-MET) from the perspective of propionate degradation, methane production and microbial population dynamics. Three different inocula were used: two from environmental sources (anaerobic sludge and river sediment) and another one from a pre-enriched electroactive consortium adapted to propionate degradation. Contrary to expectations, the reactor inoculated with the pre-enriched consortium was not able to maintain its initial good performance in the long run, and the bioelectrochemical activity collapsed after three months of operation. On the other hand, the reactor inoculated with anaerobic sludge, although it required a relatively longer time to produce any observable current, was able to maintain an electrogenic activity operation (0.8 A m−2), whilst showcasing the positive contribution of AD-MET integration into tackling propionate accumulation and enhancing methane yield (338 mL gCOD−1). However, it must also be highlighted that from a purely energetic point of view the AD-MET was not favourable.SIMinisterio de Economía y CompetitividadJunta de Castilla y LeónEnte Regional de la Energía de Castilla y Leo