Исследование влияния температуры на процесс восстановления ацетилдифенила изопропилатом алюминия

We present a compact module, emitting nearly diffraction limited green laser light at 531 nm at an average output power of more than 500 mW. As pump source for the second harmonic generation a DBR tapered laser with a total length of 6 mm was used. The RW section had a length of 2 mm including a 1 mm long passive DBR section. The devices were mounted p-side up on a copper block. For this mounting scheme, the device reaches up to 7 W maximal output power. At the power level of about 3.8 W used in the presented experiment, a wavelength of 1062.6 nm with a line-width below 0.02 nm (FWHM) was determined. More than 80% of the emitted power is originated within the central lobe of the beam waist profile illustrating the nearly diffraction limited beam quality. Using a 30mm long MgO-doped periodically poled LiNbO3 bulk crystal, the second harmonic wave is generated in a single-pass setup. Due to precise alignment and beam shaping based on the results of numerical simulations and a properly temperature control of the PPLN crystal, a maximum optical conversion efficiency of more than 14% (3.7%/W) was achieved. The fluctuation of the output power is far below 1%

Coherent combining of high brightness tapered lasers in Master Oscillator Power Amplifier configuration

International audienceImproved diode laser beam combining techniques are in strong demand for applications in material processing. Coherent beam combining (CBC) is the only combining approach that has the potential to maintain or even improve all laser properties, and thus has high potential for future systems. As part of our ongoing studies into CBC of diode lasers, we present recent progress in the coherent superposition of high-power single-pass tapered laser amplifiers. The amplifiers are seeded by a DFB laser at λ = 976 nm, where the seed is injected into a laterally single-mode ridge-waveguide input section. The phase pistons on each beam are actively controlled by varying the current in the ridge section of each amplifier, using a sequential hill-climbing algorithm, resulting in a combined beam with power fluctuations of below 1%. The currents into the tapered sections of the amplifiers are separately controlled, and remain constant. In contrast to our previous studies, we favour a limited number of individual high-power amplifiers, in order to preserve a high extracted power per emitter in a simple, low-loss coupling arrangement. Specifically, a multi-arm interferometer architecture with only three devices is used, constructed using 6 mm-long tapered amplifiers, mounted junction up on C-mounts, to allow separate contact to single mode and amplifier sections. A maximum coherently combined power of 12.9 W is demonstrated in a nearly diffraction-limited beam, corresponding to a 65% combining efficiency, with power mainly limited by the intrinsic beam quality of the amplifiers. Further increased combined power is currently sought

The Injection Laser System on the National Ignition Facility

The National Ignition Facility (NIF) is currently the largest and most energetic laser system in the world. The main amplifiers are driven by the Injection Laser System comprised of the master oscillators, optical preamplifiers, temporal pulse shaping and spatial beam formatting elements and injection diagnostics. Starting with two fiber oscillators separated by up to a few angstroms, the pulse is phase modulated to suppress SBS and enhance spatial smoothing, amplified, split into 48 individual fibers, and then temporally shaped by an arbitrary waveform generator. Residual amplitude modulation induced in the preamplifiers from the phase modulation is also precompensated in the fiber portion of the system before it is injected into the 48 pre-amplifier modules (PAMs). Each of the PAMs amplifies the light from the 1 nJ fiber injection up to the multi-joule level in two stages. Between the two stages the pre-pulse is suppressed by 60 dB and the beam is spatially formatted to a square aperture with precompensation for the nonuniform gain profile of the main laser. The input sensor package is used to align the output of each PAM to the main laser and acquire energy, power, and spatial profiles for all shots. The beam transport sections split the beam from each PAM into four main laser beams (with optical isolation) forming the 192 beams of the NIF. Optical, electrical, and mechanical design considerations for long term reliability and availability will be discussed

High-power operation of coherently coupled tapered laser diodes in an external cavity

We demonstrate a rear-side phase-locking architecture with two high-brightness diode lasers. This technique is based on the passive phase-locking of emitters in an external cavity on their rear facet, and their coherent combination on the front facet. Two high-brightness high-power tapered laser diodes are coherently combined using a Michelson-based cavity. The combining efficiency is above 80% and results in an output power of 6.7 W in a nearly diffraction-limited beam. The rear-side architecture is then used with a laser bar of 5 tapered emitters using an interferometric extended cavity, based on a diffractive optical element. We describe the experimental evaluation of the diffractive optical element, and the phase-locked operation of the laser bar

Separate phase-locking and coherent combining of two laser diodes in a Michelson cavity

We describe a new coherent beam combining architecture based on passive phase-locking of two laser diodes in a Michelson external cavity on their rear facet, and their coherent combination on the front facet. As a proof-of-principle, two ridge lasers have been coherently combined with >90 % efficiency. The phase-locking range, and the resistance of the external cavity to perturbations have been thoroughly investigated. The combined power has been stabilized over more than 15 min with an optical feedback as well as with an automatic adjustment of the driving currents. Furthermore, two high-brightness high-power tapered laser diodes have been coherently combined in a similar arrangement; the combining efficiency is 70% and results in an output power of 4 W. We believe that this new configuration combines the simplicity of passive self-organizing architectures with the optical efficiency of master-oscillator power-amplifier ones

Diode laser based light sources for biomedical applications

Diode lasers are by far the most efficient lasers currently available. With the ever-continuing improvement in diode laser technology, this type of laser has become increasingly attractive for a wide range of biomedical applications. Compared to the characteristics of competing laser systems, diode lasers simultaneously offer tunability, high-power emission and compact size at fairly low cost. Therefore, diode lasers are increasingly preferred in important applications, such as photocoagulation, optical coherence tomography, diffuse optical imaging, fluorescence lifetime imaging, and terahertz imaging. This review provides an overview of the latest development of diode laser technology and systems and their use within selected biomedical applications

Pregnant women's responses to a tailored smoking cessation intervention: turning hopelessness into competence

Background: Cognitive behavioral interventions consisting of brief counseling and the provision of self-help material designed for pregnancy have been documented as effective smoking cessation interventions for pregnant women. However, there is a need to understand how such interventions are perceived by the targeted group. Aim: To understand the cognitive, emotional, and behavioral responses of pregnant women to a clinic-based smoking cessation intervention. Methods: In-depth interviews with women attending four antenatal clinics in Cape Town, South Africa, who were exposed to a smoking intervention delivered by midwives and peer counselors. Women were purposively selected to represent a variation in smoking behavior. Thirteen women were interviewed at their first antenatal visit and 10 were followed up and reinterviewed later in their pregnancies. A content analysis approach was used, which resulted in categories and themes describing women's experiences, thoughts, and feelings about the intervention. Results: Five women quit, five had cut down, and three could not be traced for follow-up. All informants perceived the intervention positively. Four main themes captured the intervention's role in influencing women's smoking behavior. The process started with ‘understanding their reality,’ which led to ‘embracing change’ and ‘deciding to hold nothing back,’ which created a basis for ‘turning hopelessness into a feeling of competence.’Conclusion: The intervention succeeded in shifting women from feeling pessimistic about ever quitting to feeling encouraged to try and quit. Informants rated the social support they received very highly and expressed the need for the intervention to become a routine component of clinic services

A compact UV timing fiducial system for use with x-ray streak cameras at NIF

Abstract not provide

Performance results on the laser portion of the Keck laser guide star system

The Laser Guide Star (LGS) system for the Keck II, 10 m telescope consists of two separate but interconnected systems, the laser and the adaptive optics bench. The laser portion of the LGSl is a set of five frequency doubled YAG lasers pumping a master oscillator-power amplifier dye chain to produce up to 30 W of 589 p at 26 kHz of tuned light. Presently the laser system has been set up at the Keck facility in Waimea, HI and is undergoing test and evaluation. When it will be set up on the Keck II telescope, the pump lasers, dye master oscillator and associated control equipment will be located on the dome floor and the dye laser amplifiers, beam control system and diagnostics will be mounted directly on the telescope as shown in Fig. 1, Extensive use of fiber optics for both transmission of the oscillator pulse and the pump laser light has been used