39 research outputs found
Red Tunable High-Power Narrow-Spectrum External-Cavity Diode Laser Based on Tapered Amplifier
One-Watt level mid-IR output, singly resonant, continuous-wave optical parametric oscillator pumped by a monolithic diode laser
We report more than 1.1 Watt of idler power at 3373 nm in a singly resonant optical parametric oscillator (SRO), directly pumped by a single-frequency monolithic tapered diode laser. The SRO is based on a periodically poled MgO:LiNbO3 crystal in a four mirror cavity and is excited by 8.05 W of 1062 nm radiation. The SRO pump power at threshold is 4 W. The internal slope-efficiency and conversion efficiency reach 89% and 44% respectively. The signal and idler waves are temperature tuned in the range of 1541 to 1600 nm and 3154 to 3415 nm respectively. To the best of our knowledge, this is the highest output obtained for a diode pumped optical parametric oscillator (OPO), and the first time a SRO is directly pumped by a monolithic tapered diode laser
High-power green light generation by second harmonic generation of single-frequency tapered diode lasers
Efficient concept for generation of diffraction-limited green light by sum-frequency generation of spectrally combined tapered diode lasers
Diode pumping of Nd:ASL and its frequency doubling for blue emission around 450 nm
International audienceWe present the diode pumping of a Nd-doped strontium and lanthanum (Nd:ASL) crystal Sr1-xLax-yNdyMgxAl12-xO19 (0.05 ≤ x ≤ 0.5; y = 0.05) for second harmonic generation around 450 nm. In order to fulfill the pumping requirements of this crystal, we have developed a high-brightness pump source based on a tapered amplifier in an extended cavity with a volume Bragg grating for wavelength stabilization. A pump brightness of 110 MW.cm-2sr-1 has been obtained with a linewidth lower than 80 pm at 798 nm. This laser source has been used to pump a Nd:ASL crystal to obtain 300 mW at 906 nm and 53 mW at 453 nm by intracavity doubling with a LBO crystal
Generation of 3.5 W of diffraction-limited green light from SHG of a single tapered diode laser in a cascade of nonlinear crystals
Coherent combining of high brightness tapered lasers in Master Oscillator Power Amplifier configuration
International audienceImproved diode laser beam combining techniques are in strong demand for applications in material processing. Coherent beam combining (CBC) is the only combining approach that has the potential to maintain or even improve all laser properties, and thus has high potential for future systems. As part of our ongoing studies into CBC of diode lasers, we present recent progress in the coherent superposition of high-power single-pass tapered laser amplifiers. The amplifiers are seeded by a DFB laser at λ = 976 nm, where the seed is injected into a laterally single-mode ridge-waveguide input section. The phase pistons on each beam are actively controlled by varying the current in the ridge section of each amplifier, using a sequential hill-climbing algorithm, resulting in a combined beam with power fluctuations of below 1%. The currents into the tapered sections of the amplifiers are separately controlled, and remain constant. In contrast to our previous studies, we favour a limited number of individual high-power amplifiers, in order to preserve a high extracted power per emitter in a simple, low-loss coupling arrangement. Specifically, a multi-arm interferometer architecture with only three devices is used, constructed using 6 mm-long tapered amplifiers, mounted junction up on C-mounts, to allow separate contact to single mode and amplifier sections. A maximum coherently combined power of 12.9 W is demonstrated in a nearly diffraction-limited beam, corresponding to a 65% combining efficiency, with power mainly limited by the intrinsic beam quality of the amplifiers. Further increased combined power is currently sought