Chiral exciplex dyes showing circularly polarized luminescence: extension of the excimer chirality rule

A series of axially chiral binaphthyls and quaternaphthyls possessing two kinds of aromatic fluorophores, such as pyrenyl, perylenyl, and 4-(dimethylamino)phenyl groups, arranged alternately were synthesized by a divergent method. In the excited state, the fluorophores selectively formed a unidirectionally twisted exciplex (excited heterodimer) by a cumulative steric effect and exhibited circularly polarized luminescence (CPL). They are the first examples of a monomolecular exciplex CPL dye. This versatile method for producing exciplex CPL dyes also improved fluorescence intensity, and the CPL properties were not very sensitive to the solvent or to the temperature owing to the conformationally rigid exciplex. This systematic study allowed us to confirm that the excimer chirality rule can be applied to the exciplex dyes: left- and right-handed exciplexes with a twist angle of less than 90 degrees exhibit (-)- and (+)-CPL, respectively

Enhancement of protein thermostability by three consecutive mutations using loop-walking method and machine learning

We developed a method to improve protein thermostability, "loop-walking method". Three consecutive positions in 12 loops of Burkholderia cepacia lipase were subjected to random mutagenesis to make 12 libraries. Screening allowed us to identify L7 as a hot-spot loop having an impact on thermostability, and the P233G/L234E/V235M mutant was found from 214 variants in the L7 library. Although a more excellent mutant might be discovered by screening all the 8000 P233X/L234X/V235X mutants, it was difficult to assay all of them. We therefore employed machine learning. Using thermostability data of the 214 mutants, a computational discrimination model was constructed to predict thermostability potentials. Among 7786 combinations ranked in silico, 20 promising candidates were selected and assayed. The P233D/L234P/V235S mutant retained 66% activity after heat treatment at 60 degrees C for 30 min, which was higher than those of the wild-type enzyme (5%) and the P233G/L234E/V235M mutant (35%)

Catalytic synthesis and physical properties of CO2-based cross-linked poly(cyclohexene carbonate)s

Bifunctional aluminum porphyrins (0.001 mol%) catalyzed the terpolymerization of cyclohexene oxide (CHO), bis(CHO), and CO2 to give cross-linked polycarbonates (CLPs) under solvent-free conditions. A small amount of bis(CHO) acted as a cross-linking agent, and the use of only 0.1 mol% bis(CHO) to CHO produced polymers of quite large sizes. The thermal and mechanical properties of CLPs could be altered by changing the structure and amount of bis(CHO), and the CLPs showed improved thermal stability and tensile strength as compared to linear poly(cyclohexene carbonate)s (PCHCs). The degradation of the CLPs was also investigated, and the selective cleavage of the cross-links was achieved by UV light irradiation to give linear PCHCs. The present study disclosed the potentials of cross-linking terpolymerization for the preparation of various CLPs with a constant CO2 content (31 wt%)

Selective Anion Sensing By Chiral Macrocyclic Receptors With Multiple Hydrogen-bonding Sites

Chiral macrocycles featuring sulfonamide and/or amide groups as anion-binding sites were synthesized. X-ray crystal structures and DFT calculations have shown that they adopt different conformations that may lead to unique binding behavior. Indeed, various anions could be sensed by their colorimetric and/or fluorescence signal output. The chiral macrocycles showed chiral recognition for chiral anions. Furthermore, a multisensor array with two or four chiral receptors discriminated seven phosphate anions (AMP, ADP, ATP, CMP, GMP, Pi, and PPi) with 100% classification accuracy

Aluminum porphyrins with quaternary ammonium halides as catalysts for copolymerization of cyclohexene oxide and CO2: metal–ligand cooperative catalysis

Bifunctional AlIII porphyrins with quaternary ammonium halides, 2-Cl and 2-Br, worked as excellent catalysts for the copolymerization of cyclohexene oxide (CHO) and CO2 at 120 °C. Turnover frequency (TOF) and turnover number (TON) reached 10 000 h−1 and 55 000, respectively, and poly(cyclohexene carbonate) (PCHC) with molecular weight of up to 281 000 was obtained with a catalyst loading of 0.001 mol%. In contrast, bifunctional MgII and ZnII counterparts, 3-Cl and 4-Cl, as well as a binary catalyst system, 1-Cl with bis(triphenylphosphine)iminium chloride (PPNCl), showed poor catalytic performances. Kinetic studies revealed that the reaction rate was first-order in [CHO] and [2-Br] and zero-order in [CO2], and the activation parameters were determined: ΔH‡ = 12.4 kcal mol−1, ΔS‡ = −26.1 cal mol−1 K−1, and ΔG‡ = 21.6 kcal mol−1 at 80 °C. Comparative DFT calculations on two model catalysts, AlIII complex 2′ and MgII complex 3′, allowed us to extract key factors in the catalytic behavior of the bifunctional AlIII catalyst. The high polymerization activity and carbonate-linkage selectivity originate from the cooperative actions of the metal center and the quaternary ammonium cation, both of which facilitate the epoxide-ring opening by the carbonate anion to form the carbonate linkage in the key transition state such as TS3b (ΔH‡ = 13.3 kcal mol−1, ΔS‡ = −3.1 cal mol−1 K−1, and ΔG‡ = 14.4 kcal mol−1 at 80 °C)

修飾ポルフィリンを用いる分子認識の物理化学的研究

京都大学0048新制・課程博士博士(工学)甲第5773号工博第1385号新制||工||962(附属図書館)UT51-94-R297京都大学大学院工学研究科合成化学専攻(主査)教授 生越 久靖, 教授 伊藤 嘉彦, 教授 砂本 順三学位規則第4条第1項該当Doctor of EngineeringKyoto UniversityDFA

Terpolymerizations of cyclohexene oxide, CO2, and isocyanates or isothiocyanates for the synthesis of poly(carbonate–urethane)s or poly(carbonate–thioimidocarbonate)s

Terpolymerization of cyclohexene oxide (CHO), CO2, and aryl isothiocyanates produced poly(carbonate–thioimidocarbonate)s with gradient character, while that of CHO, CO2, and aryl isocyanates furnished poly(carbonate–urethane)s with random sequences. The former underwent partial degradation upon acid treatment or UV irradiation, while the latter was stable under the same conditions

Mechanism of BPh3-Catalyzed N-Methylation of Amines with CO2 and Phenylsilane : Cooperative Activation of Hydrosilane

BPh3 catalyzes the N-methylation of secondary amines and the C-methylenation (methylene-bridge formation between aromatic rings) of N,N-dimethylanilines or 1-methylindoles in the presence of CO2 and PhSiH3; these reactions proceed at 30-40 degrees C under solvent-free conditions. In contrast, B(C6F5)(3) shows little or no activity. B-11 NMR spectra suggested the generation of [HBPh3](-). The detailed mechanism of the BPh3-catalyzed N-methylation of N-methylaniline (1) with CO2 and PhSiH3 was studied by using DFT calculations. BPh3 promotes the conversion of two substrates (N-methylaniline and CO2) into a zwitterionic carbamate to give three-component species [Ph(Me)(H)N+CO2-center dot center dot center dot BPh3]. The carbamate and BPh3 act as the nucleophile and Lewis acid, respectively, for the activation of PhSiH3 to generate [HBPh3](-), which is used to produce key CO2-derived species, such as silyl formate and bis(silyl)acetal, essential for the N-methylation of 1. DFT calculations also suggested other mechanisms involving water for the generation of [HBPh3](-) species

Minimization of Amounts of Catalyst and Solvent in NHC-Catalyzed Benzoin Reactions of Solid Aldehydes: Mechanistic Consideration of Solid-to-Solid Conversion and Total Synthesis of Isodarparvinol B

Attempts were made to minimize the amounts of catalyst and solvent in the NHC-catalyzed benzoin reactions of solid aldehydes. In some case, solid-to-solid conversions proceeded in the solvent-free NHC-catalyzed benzoin reactions. Even if a mixture of the substrate, N-heterocyclic carbene (NHC) precursor, and inorganic base was initially a powdery solid, the reaction did proceed at reaction temperature lower than the melting points of each compound. The solid mixture partially melted or became a slurry or suspension in the meantime. We call this solid/liquid mixture a semisolid state. The reaction giving an optically active product was faster than that giving a racemic mixture of the same product. Melting-point depression was observed for a series of mixtures of the substrate and product in different substrate/product ratios. Solvent-free solid-to-solid conversions were accelerated by the formation of a semisolid state resulting from the melting-point depression of the solid substrate accompanied by the product formation. In the case of solid substrates with high melting points, melting-point depression was useless, and the addition of a small amount of solvent was needed. The first total synthesis of isodarparvinol B was achieved via the NHC-catalyzed intramolecular benzoin reaction using a small amount of solvent as an additive