High‐throughput sequencing approach in analysis of microbial communities colonizing natural gas pipelines

This study provides a deep modern insight into the phylogenetic diversity among bacterial consortia found in working and nonworking high‐methane natural gas pipelines located in Poland. The working pipeline was characterized by lower biodiversity (140–154 bacterial genera from 22 to 23 classes, depending on the source of the debris) in comparison to the off‐gas pipeline (169 bacterial genera from 23 classes). The sediment recovered from the working pipeline contained mostly DNA identified as belonging to the phylum Firmicutes (66.4%–45.9% operational taxonomic units [OTUs]), predominantly Bacillus (41.4%–31.1% OTUs) followed by Lysinibacillus (2.6%–1.5% OTUs) and Clostridium (2.4%–1.8% OTUs). In the nonworking pipeline, Proteobacteria (46.8% OTUs) and Cyanobacteria (27.8% OTUs) were dominant. Over 30% of the Proteobacteria sequences showed homologies to Gammaproteobacteria, with Pseudomonas (7.1%), Enhydrobacter (2.1%), Stenotrophomonas (0.5%), and Haempohilus (0.4%) among the others. Differences were noted in terms of the chemical compositions of deposits originating from the working and nonworking gas pipelines. The deposits from the nonworking gas pipeline contained iron, as well as carbon (42.58%), sulphur (15.27%), and oxygen (15.32%). This composition can be linked to both the quantity and type of the resident microorganisms. The presence of a considerable amount of silicon (17.42%), and of aluminum, potassium, calcium, and magnesium at detectable levels, may likewise affect the metabolic activity of the resident consortia in the working gas pipeline. All the analyzed sediments included both bacteria known for causing and intensifying corrosion (e.g., Pseudomonas, Desulfovibrio, Shewanella, Serratia) and bacteria that can protect the surface of pipelines against deterioration (e.g., Bacillus). Biocorrosion is not related to a single mechanism or one species of microorganism, but results from the multidirectional activity of multiple microbial communities. The analysis presented here of the state of the microbiome in a gas pipeline during the real gas transport is a particularly valuable element of this work

Atomic-scale modeling of the deformation of nanocrystalline metals

Nanocrystalline metals, i.e. metals with grain sizes from 5 to 50 nm, display technologically interesting properties, such as dramatically increased hardness, increasing with decreasing grain size. Due to the small grain size, direct atomic-scale simulations of plastic deformation of these materials are possible, as such a polycrystalline system can be modeled with the computational resources available today. We present molecular dynamics simulations of nanocrystalline copper with grain sizes up to 13 nm. Two different deformation mechanisms are active, one is deformation through the motion of dislocations, the other is sliding in the grain boundaries. At the grain sizes studied here the latter dominates, leading to a softening as the grain size is reduced. This implies that there is an ``optimal'' grain size, where the hardness is maximal. Since the grain boundaries participate actively in the deformation, it is interesting to study the effects of introducing impurity atoms in the grain boundaries. We study how silver atoms in the grain boundaries influence the mechanical properties of nanocrystalline copper.Comment: 10 pages, LaTeX2e, PS figures and sty files included. To appear in Mater. Res. Soc. Symp. Proc. vol 538 (invited paper). For related papers, see http://www.fysik.dtu.dk/~schiotz/publist.htm

Corrosion Inhibitors for Sour Oilfield Environment (H2S Corrosion)

Lower-grade steel materials are the most commonly used construction materials for oil and gas wells due to their low cost and high performance. However, they are susceptible to corrosion when they come in contact with corrosive environments that are highly acidic. In oil wells, particularly deep oil wells, hydrogen sulfide (H2S) is commonly found. The dissolution of H2S gas in produced water makes the fluid corrosive. The use of corrosion inhibitors is perhaps the most practical and costeffective means of controlling corrosion of low carbon steels in the sour environment. In this chapter, typical corrosion inhibitors used in oil and gas fields to control the internal corrosion of oilfield equipment caused by H2S are being examined. The inhibitors found to be effective are polar functional compounds, with many being based on nitrogen-containing compounds, such as amines, imidazolines, and quaternary ammonium salts. Drawbacks of these compounds in practical applications and potentials of future developments are discussed