Cations and Anions in Sewage Sludge from Gaza Waste Water Treatment Plant

This paper determined cations and anions concentrations, Total Kjeldahl Nitrogen (TKN), and heavy metals content in sewage sludge collected from the drying beds of wastewater treatment plant in Gaza. The aim was to test the possibility of using this sewage sludge as an alternative source of mineral fertilizers. Many instruments were used in this work: flame photometry (K, Na), EDTA titration (Ca, Mg), the turbidity method ()

Physicochemical properties of sewage sludge from Gaza

This study characterized the physicochemical properties of sewage sludge collected from Gaza wastewater treatment plant. Sludge samples were collected from the drying beds, air-dried, sieved through 2 mm and stored in plastic bags at room temperature. Sludge density, particle size distribution, water holding capacity, void volume, pH, EC, total organic carbon and hydrophobicity were determined. Results showed the bulk density is about 1.18 g/cm3 whereas the real density is 2.12 g/cm3 and void volume is 50%; Particle size distribution showed that the major size of sludge is sand-like size (630-200 µm) and the minor size is silt-like size (200-20 µm) and clay-like size are less than 20 µm. Sludge has an acidic pH reaction (6.78±0.02) with an electric conductivity equal to (2.49±0.04) mS∙ cm− 1. The hydrophobicity of sludge is very high, water drop penetration time (WDPT) is 114.77±18.78 sec with a radius of 0.44±0.08 cm. In the way around, oil drop penetration time (ODPT) of sludge is 5.05±1.28 sec with a radius of 1.25±0.14 cm. The WDPT/ODPM ration is very high value 22.73 indicating extreme hydrophobicity. High value of hydrophobicity may reduce water filtration in soil when sludge applied for agriculture. These results suggest that sludge application to soil may change the physicochemical properties of soil

Adsorption of benzene and naphthalene to modified montmorillonite

This study aims to characterize the adsorption pattern of benzene and naphthalene on montmorillonite modified with hexadecyltrimethylammonium (HDTMA), tetramethylammonium (TMA), tetraethylammonium (TEA), tetrabutylammonium (TBA) or benzyltrimethylammonium (BTMA). Adsorption isotherms of benzene and naphthalene from water followed Langmuir and Freundlich models respectively. The Langmuir form of the isotherms suggests that benzene and naphthalene adsorbed to the surfaces as a monolayer. Binding coefficient of naphthalene increased as the molecular weight of the pre-adsorbed surfactant increased. Adsorption of benzene and naphthalene follows the sequence: montmorillonite-benzyltrimethylammonium> montmorillonite-hexadecyltrimethylammonium> montmorillonite-tetrabutylammonium> montmorillonite-tetraethylammonium> montmorillonite-tetramethylammonium. The results indicate that using those complexes can be useful in removing pollutants from water

Uptake of divalent metal ions (Cu2+, Zn2+, and Cd2+) by polysiloxane immobilized diamine ligand system

Porous solid siloxane polymers carrying diamine functional group of formula P–(CH2)3NH–CH2CH2NH2 (where P–represents a silica-like siloxane framework) have been prepared by replacement of the iodine in iodopolysiloxane with ethylenediamine. The iodofunctionalized polysiloxane was prepared by polycondensation of Si(OEt)4 and (MeO)3Si(CH2)I. The polysiloxane diamine ligand system exhibits high potential for preconcentration of divalent metal ions (Cu2+, Zn2+, and Cd2+). The tendency to chemisorb these divalent metal ions by the diamine ligand system at the optimum conditions was found in the order: Cu2+ > Zn2+ > Cd2+. Diamine ligand system suffers from leaching of ligand containing groups upon treatment with acidic solutions

Synthesis of Nanometal Oxide–Coated Cotton Composites

Several selected studies dealing with the development of novel antimicrobial metal oxide–coated cotton nanocomposites and their antimicrobial applications have been reviewed in this chapter. Synthesis of metal oxide nanoparticles (NPs) and its deposition onto cotton fibers were conducted using various methods. These include the high energy γ-radiation, thermal treatment-assisted impregnation, “pad-dry-cure” of the impregnated fabric in the colloid formulation of metal oxide soluble, and ultrasonic radiation methods. The coated metal oxide nanoparticles have shown an effective enhancement for antimicrobial activity. They reduce the chance of diseases originating from hospital infections. The antimicrobial properties of cotton fabrics finished with metal oxide NPs against a variety of bacterial strains commonly associated with nosocomial infections, caused by Staphylococcus aureus and Escherichia coli, have been investigated by four different methods. The morphology of the cotton-coated metal oxide nanoparticles and their chemical structure have been analyzed by UV-vis, Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), X-ray diffraction (XRD) and X-ray photoelectron spectra (XPS). SEM and XRD analyses revealed that the shape and size of the coated nanoparticles are dependent on the nature of the metal oxide and its preparation conditions

Bioremediation of diuron in soil environment: influence of cyanobacterial mat

Diuron is a herbicide widely used in the Middle East; its field application creates many environmental problems. This study investigated the bioremediation of Diuron in soil environment by Cyanobacterial mats collected from Gaza Wadi. Various concentrations of Diuron were injected in water saturated soil samples pre-treated with Cyanobacterial mat for several periods. Percent growth of Jews mallow as a test plant was taken as indicator of biodegradation of Diuron. Results showed that Diuron was degraded in soil and degradation was more pronounced when Diuron was incubated with Cyanobacterial in the irrigation water. Larger applied rate of Cyanobacterial mat did not affect the biodegradation of Diuron. These encouraging results suggest that application of Cyanobacterial mat could be a suitable method to remediate soil pollution

Synthesis and structural characterization of a new macrocyclic polysiloxane-immobilized ligand system

A new porous solid macrocyclic 1,4,7,11,14-pentaazapentadecane-3,15-dione polysiloxane ligand system of the general formula P–(CH2)3–C11H22O2N5 (where P represents [Si–O] n siloxane network) has been prepared by the reaction of polysiloxane-immobilized iminobis(N-(2-aminoethyl)acetamide) with 1,3-dibromopropane. The FTIR and XPS results confirm the introduction of the macrocyclic functional ligand group into the polysiloxane network. The new macrocyclic polysiloxane ligand system exhibits high potential for the uptake of metal ions (Fe3+, Co2+, Ni2+, Cu2+ and Zn2+)