Effect of Triple Treatment on the Surface Structure and Hardness of 304 Austenitic Stainless Steel

Nitriding, annealing, and carbonitriding processes are conducted to modify the surface of AISI 304 austenitic stainless steel via radio frequency plasma. A ~20 μm thick nitride layer is obtained in ten minutes at a plasma power of 450 W. Hence, all nitrided samples are annealed under vacuum for one hour at 400 ̊C. The nitrided-annealed samples are carbonitrided via the identical technique at various C2H2/N2 gas pressure ratios. Numerous analytical techniques, including X-ray diffractometry, glow discharge optical spectroscopy (GDOS), Talysurf Intra Profilemeter, optical microscopy (OM), scanning electron microscopy (SEM), and Vickers microhardness tester, were employed to investigate the triple-treated specimens. Microstructure analysis of the triple-treated samples reveals the formation of N2 expanded austenite phase (γN), γʹ-Fe4N, CrN, Fe3C, and Fe7C3. The results indicate that the elemental composition, microhardness, and thickness of the triple-treated layers are all depending on the gas composition. After carbonitriding, the total thickness of the compound layer grew from ~20 to ~34.5 μm. The surface microhardness of the triple-treated samples increased as the C2H2/N2 gas composition ratio increased up to 70%, reaching 1,497±33.5 HV0.1, which is ~6.8 and ~1.42 folds higher than the untreated and prenitrided samples, respectively

Phlebotomus papatasi SP15: mRNA expression variability and amino acid sequence polymorphisms of field populations

Citation: Ramalho-Ortigao, M., Coutinho-Abreu, I. V., Balbino, V. Q., Figueiredo, C. A. S., Mukbel, R., Dayem, H., . . . McDowell, M. A. (2015). Phlebotomus papatasi SP15: mRNA expression variability and amino acid sequence polymorphisms of field populations. Parasites & Vectors, 8, 14. doi:10.1186/s13071-015-0914-2Background: The Phlebotomus papatasi salivary protein PpSP15 was shown to protect mice against Leishmania major, suggesting that incorporation of salivary molecules in multi-component vaccines may be a viable strategy for anti-Leishmania vaccines. Methods: Here, we investigated PpSP15 predicted amino acid sequence variability and mRNA profile of P. papatasi field populations from the Middle East. In addition, predicted MHC class II T-cell epitopes were obtained and compared to areas of amino acid sequence variability within the secreted protein. Results: The analysis of PpSP15 expression from field populations revealed significant intra-and interpopulation variation.. In spite of the variability detected for P. papatasi populations, common epitopes for MHC class II binding are still present and may potentially be used to boost the response against Le. major infections. Conclusions: Conserved epitopes of PpSP15 could potentially be used in the development of a salivary gland antigen-based vaccine.Additional Authors: Lobo, N. F.;Mahon, A. R.;Emrich, S. J.;Kamhawi, S.;Collins, F. H.;McDowell, M. A

Profiling of human acquired immunity against the salivary proteins of Phlebotomus papatasi reveals clusters of differential immunoreactivity

Citation: Geraci, Nicholas S., Rami M. Mukbel, Michael T. Kemp, Mariha N. Wadsworth, Emil Lesho, Gwen M. Stayback, Matthew M. Champion, et al. 2014. “Profiling of Human Acquired Immunity Against the Salivary Proteins of Phlebotomus Papatasi Reveals Clusters of Differential Immunoreactivity.” The American Journal of Tropical Medicine and Hygiene 90 (5): 923–38. https://doi.org/10.4269/ajtmh.13-0130.Phlebotomus papatasi sand flies are among the primary vectors of Leishmania major parasites from Morocco to the Indian subcontinent and from southern Europe to central and eastern Africa. Antibody-based immunity to sand fly salivary gland proteins in human populations remains a complex contextual problem that is not yet fully understood. We profiled the immunoreactivities of plasma antibodies to sand fly salivary gland sonicates (SGSs) from 229 human blood donors residing in different regions of sand fly endemicity throughout Jordan and Egypt as well as 69 US military personnel, who were differentially exposed to P. papatasi bites and L. major infections in Iraq. Compared with plasma from control region donors, antibodies were significantly immunoreactive to five salivary proteins (12, 26, 30, 38, and 44 kDa) among Jordanian and Egyptian donors, with immunoglobulin G4 being the dominant anti-SGS isotype. US personnel were significantly immunoreactive to only two salivary proteins (38 and 14 kDa). Using k-means clustering, donors were segregated into four clusters distinguished by unique immunoreactivity profiles to varying combinations of the significantly immunogenic salivary proteins. SGS-induced cellular proliferation was diminished among donors residing in sand fly-endemic regions. These data provide a clearer picture of human immune responses to sand fly vector salivary constituents

Properties of Indium Tin Oxide Thin Films Deposited on Polymer Substrates

Indium tin oxide thin films with different thicknesses were deposited on polymer substrates, held at room temperature, using electron beam evaporation. The dependence of structural properties, optical properties and room temperature resistivity on the indium tin oxide film thickness was studied. X-ray diffraction illustrates the amorphous structure for all the indium tin oxide prepared films. The high roughness of the polymer substrate affects the properties of indium tin oxide films. The transmittance, the resistivity, and the optical band gap decrease with increasing the film thickness while the refractive index increases. The present indium tin oxide films are amorphous, transparent and have relatively low resistivity. These properties are suitable as transparent electrode for organic light-emitting diodes, touch screens, and in piezoelectric applications

Influences of the barrier types and arrangements on dielectric barrier discharge characteristics

The electrical characteristics of DBD have been studied using four different barriers. These barriers are Pyrex glass, Mylar, porous alumina Al2O3 plates and ceramic plates of composition (50% MgO:50% Al2O3). It has been found that the type and the internal composition of the dielectric barriers affect the formation of the DBD modes. Using glass or Mylar as a dielectric causes the formation of the filamentary DBD mode. While using porous alumina plates leads to the generation of the discharge in APGD mode. A quasiglow mode is obtained when a ceramic of composition (50% MgO:50% Al2O3) is used. The effect of using one dielectric barrier, on the DBD characteristics has also been studied. Antisymmetric behavior of the current waveform is obtained when one dielectric barrier is placed on the life electrode