Determination of the tensile properties and biodegradability of cornstarch-based biopolymers plasticized with sorbitol and glycerol

In this study, the effects of various quantities of sorbitol and glycerol plasticizers (0%, 30%, 45%, and 60%) on cornstarch-based film were examined to develop a novel polymer for usage with biodegradable materials. The film was prepared using the casting process. According to the test findings, the application of the plasticizer concentrations affected the thickness, moisture content, and water absorption of the film. When plasticizer concentrations were increased to 60%, the tensile stress and Young’s modulus of plasticized films dropped regardless of plasticizer type. However, the thin film with addition of 30% sorbitol plasticizer demonstrated a steady value of Young’s modulus (60.17 MPa) with an increase in tensile strength (13.61 MPa) of 46%, while the lowest combination of tensile strength and Young’s modulus is the film that was plasticized with 60% glycerol, with 2.33 MPa and 16.23 MPa, respectively. In summary, the properties and performance of cornstarch-based film were greatly influenced by plasticizer types and concentrations. The finest set of features in this research appeared in the film plasticized with 30% sorbitol, which achieved the best mechanical properties for food packaging applications

Highly Active Nickel (II) Oxide-Supported Cerium Oxide Catalysts for Valorization of Glycerol into Oxygenated Fuel Additives.

Acetylation of glycerol to yield monoacetin (MAT), diacetin (DAT), and triacetin (TAT) over NiO-supported CeO2 (xNiO/CeO2) catalysts is reported. The catalysts were synthesized utilizing a sol-gel technique, whereby different quantities of NiO (x = 9, 27, and 45 wt%) were supported onto the CeO2 substrate, and hexadecyltrimethylammonium bromide (CTABr) served as a porogen. The utilization of EDX elemental mapping analysis confirmed the existence of evenly distributed Ni2+ ion and octahedral NiO nanoparticles on the CeO2 surface through the DRS UV-Vis spectroscopy. The most active catalyst is 27NiO/CeO2 based on TAT selectivity in the glycerol acetylation with ethanoic acid, attaining 97.6% glycerol conversion with 70.5% selectivity to TAT at 170 C with a 1:10 glycerol/ethanoic acid molar ratio for 30 min using a non-microwave instant heating reactor. The 27NiO/CeO2 is reusable without significant decline in catalytic performance after ten consecutive reaction cycles, indicating high structure stability with accessible active acidity.Partial funding for open access charge: Universidad de Málag

Vertically Aligned Silicon Carbide Nanowires/Boron Nitride Cellulose Aerogel Networks Enhanced Thermal Conductivity and Electromagnetic Absorbing of Epoxy Composites

With the innovation of microelectronics technology, the heat dissipation problem inside the device will face a severe test. In this work, cellulose aerogel (CA) with highly enhanced thermal conductivity (TC) in vertical planes were successfully obtained by constructing a vertically aligned silicon carbide nanowires (SiC NWs)/boron nitride (BN) network via the ice template assisted strategy. The unique network structure of SiC NWs connected to BN ensures that the TC of the composite in the vertical direction reaches 2.21 W/(m·K) at a low hybrid filler loading of 16.69 wt, which was increased by 890 compared to pure epoxy (EP). In addition, relying on unique porous network structure of CA, EP based composite also showed higher TC than other comparative samples in the horizontal direction. Meanwhile, the composite exhibits good electrically insulating with a volume electrical resistivity about 2.35×1011 Ω·cm, and displays excellent electromagnetic wave absorption performance with a minimum reflection loss of -21.5 dB and a wide effective absorption bandwidth (< -10 dB) from 8.8 to 11.6 GHz. Therefore, this work provides a new strategy for manufacturing polymer-based composites with excellent multifunctional performances in microelectronic packaging applications

Supercritical Carbon Dioxide Isolation of Cellulose Nanofibre and Enhancement Properties in Biopolymer Composites

The physical properties, such as the fibre dimension and crystallinity, of cellulose nanofibre (CNF) are significant to its functional reinforcement ability in composites. This study used supercritical carbon dioxide as a fibre bundle defibrillation pretreatment for the isolation of CNF from bamboo, in order to enhance its physical properties. The isolated CNF was characterised through zeta potential, TEM, XRD, and FT-IR analysis. Commercial CNF was used as a reference to evaluate the effectiveness of the method. The physical, mechanical, thermal, and wettability properties of the bamboo and commercial CNF-reinforced PLA/chitin were also analysed. The TEM and FT-IR results showed the successful isolation of CNF from bamboo using this method, with good colloidal stability shown by the zeta potential results. The properties of the isolated bamboo CNF were similar to the commercial type. However, the fibre diameter distribution and the crystallinity index significantly differed between the bamboo and the commercial CNF. The bamboo CNF had a smaller fibre size and a higher crystallinity index than the commercial CNF. The results from the CNF-reinforced biocomposite showed that the physical, mechanical, thermal, and wettability properties were significantly different due to the variations in their fibre sizes and crystallinity indices. The properties of bamboo CNF biocomposites were significantly better than those of commercial CNF biocomposites. This indicates that the physical properties (fibre size and crystallinity) of an isolated CNF significantly affect its reinforcement ability in biocomposites. The physical properties of isolated CNFs are partly dependent on their source and production method, among other factors. These composites can be used for various industrial applications, including packaging

Removal of Fe (II) ions from Aqueous solution using Rice-husk Adsorbents in fixed-bed column

Rice husk has been converted into activated carbon for the adsorbent to remove the heavy metal from the aqueous solution. This study aimed to convert rice husk to activated carbon (AC) for use in the adsorption of Fe ions in a fixed-bed column. Rice husk was first pyrolyzed in an atmosphere of nitrogen gas at 400 oC, then a chemical activation method using sodium hydroxide. The rice husk activated carbon (RH-AC) was characterized using Fourier transform infrared (FTIR) and Scanning electron microscope (SEM) to identify the functional group and microstructure of carbon. The performance of the carbon was tested on the Fe removal from an aqueous solution in a continuous column. The adsorption process was carried out using Fe solution with an initial concentration of 3 mg/L as an artificial sample. The amount of carbon is 25, and 50 g were filled in an adsorber column with a diameter of 5.4 cm and height of 40 cm. SEM images revealed that the activated carbons shown with well-developed pore sizes and pore structure were produced after the chemical activation.  The FTIR absorption bands observed in the RH-AC sample confirmed the presence of hydroxyl (-OH), carbonyl, and carboxylic (-COOH) groups of RH-AC adsorbent. The highest Fe removal efficiencies were 91.9% on chemically activated carbon and column mass 50 g at 400 minutes. The overall study revealed the potential value of chemically activated RH-AC as a possible commercial adsorbent in a continuous column wastewater treatment strategy

Determination of the Tensile Properties and Biodegradability of Cornstarch-Based Biopolymers Plasticized with Sorbitol and Glycerol

In this study, the effects of various quantities of sorbitol and glycerol plasticizers (0%, 30%, 45%, and 60%) on cornstarch-based film were examined to develop a novel polymer for usage with biodegradable materials. The film was prepared using the casting process. According to the test findings, the application of the plasticizer concentrations affected the thickness, moisture content, and water absorption of the film. When plasticizer concentrations were increased to 60%, the tensile stress and Young’s modulus of plasticized films dropped regardless of plasticizer type. However, the thin film with addition of 30% sorbitol plasticizer demonstrated a steady value of Young’s modulus (60.17 MPa) with an increase in tensile strength (13.61 MPa) of 46%, while the lowest combination of tensile strength and Young’s modulus is the film that was plasticized with 60% glycerol, with 2.33 MPa and 16.23 MPa, respectively. In summary, the properties and performance of cornstarch-based film were greatly influenced by plasticizer types and concentrations. The finest set of features in this research appeared in the film plasticized with 30% sorbitol, which achieved the best mechanical properties for food packaging applications

Optoelectrical Properties of Hexamine Doped-Methylammonium Lead Iodide Perovskite under Different Grain-Shape Crystallinity

The crystallinity properties of perovskite influence their optoelectrical performance in solar cell applications. We optimized the grain shape and crystallinity of perovskite film by annealing treatment from 130 to 170 °C under high humidity (relative humidity of 70%). We found that the grain size, grain interface, and grain morphology of the perovskite are optimized when the sample was annealed at 150 °C for 1 h in the air. At this condition, the perovskite film is composed of 250 nm crystalline shape grain and compact inter-grain structure with an invincible grain interface. Perovskite solar cells device analysis indicated that the device fabricated using the samples annealed at 150 °C produced the highest power conversion efficiency, namely 17.77%. The open circuit voltage (Voc), short-circuit current density (Jsc), and fill factor (FF) of the device are as high as 1.05 V, 22.27 mA/cm2, and 0.76, respectively. Optoelectrical dynamic analysis using transient photoluminescence and electrochemical impedance spectroscopies reveals that (i) carrier lifetime in the champion device can be up to 25 ns, which is almost double the carrier lifetime of the sample annealed at 130 °C. (ii) The interfacial charge transfer resistance is low in the champion device, i.e., ~20 Ω, which has a crystalline grain morphology, enabling active photocurrent extraction. Perovskite’s behavior under annealing treatment in high humidity conditions can be a guide for the industrialization of perovskite solar cells

Use of Ionic Liquid Pretreated and Fermented Sugarcane Bagasse as an Adsorbent for Congo Red Removal

A large amount of industrial wastewater containing pollutants including toxic dyes needs to be processed prior to its discharge into the environment. Biological materials such as sugarcane bagasse (SB) have been reported for their role as adsorbents to remove the dyes from water. In this study, the residue SB after fermentation was utilized for the dye removal. A combined pretreatment of NaOH and methyltrioctylammonium chloride was given to SB for lignin removal, and the pretreated SB was utilized for cellulase production from Bacillus aestuarii UE25. The strain produced 118 IU mL−1 of endoglucanse and 70 IU mL−1 of β-glucosidase. Scanning electron microscopy and FTIR spectra showed lignin and cellulose removal in fermented SB. This residue was utilized for the adsorption of an azo dye, congo red (CR). The thermodynamic, isotherm and kinetics studies for the adsorption of CR revealed distinct adsorption features of SB. Untreated SB followed Langmuir isotherm, whereas pretreated SB and fermented SB obeyed the Freundlich isotherm model. The pseudo-second-order model fitted well for the studied adsorbents. The results of thermodynamic studies revealed spontaneous adsorption with negative standard free energy values. Untreated SB showed a 90.36% removal tendency at 303.15 K temperature, whereas the adsorbents comprised of pretreated and fermented SB removed about 98.35% and 97.70%, respectively. The study provided a strategy to utilize SB for cellulase production and its use as an adsorbent for toxic dyes removal