The Influence of BaO on the Mechanical and Gamma / Fast Neutron Shielding Properties of Lead Phosphate Glasses

The mechanical features evaluated theoretically using Makishima-Mackenzie's model for glasses xBaO-(50-x) PbO–50P2O5 where x = 0, 5, 10, 15, 20, 30, 40, and 50 mol%. Wherefore, the elastic characteristics; Young's, bulk, shear, and longitudinal modulus calculated. The obtained result showed an increase in the calculated values of elastic moduli with the replacement of the PbO by BaO contents. Moreover, the Poisson ratio, micro-hardness, and the softening temperature calculated for the investigated glasses. Besides, gamma and neutron shielding ability evaluated for the barium doped lead phosphate glasses. Monte Caro code (MCNP-5) and the Phy-X/PSD program applied to estimate the mass attenuation coefficient of the studied glasses. The decrease in the PbO ratio has a negative effect on the MAC. The highest MAC decreased from 65.896 cm2/g to 32.711 cm2/g at 0.015 MeV for BPP0 and BPP7, respectively. The calculated values of EBF and EABF showed that replacement of PbO with BaO contents in the studied BPP glasses helps to reduce the number of photons accumulated inside the studied BPP glasses. © 2021 Korean Nuclear Society.Taif University, Saudi Arabia is kindly acknowledged for Supporting our work through the Project number (TURSP-2020/84)

Multiple characterization of some glassy-alloys as photon and neutron shields: In-silico Monte Carlo investigation

In the present work, the nuclear radiation shielding proficiency of eight glassy alloys (Gd25RE25Co25Al25 (RE = Tb, Dy and Ho)) containing different amounts of rare earth elements was investigated with MCNPX simulation codes. Mass attenuation coefficients (μ/ρ) of the glassy alloys were simulated in the energy interval of 0.2-20 MeV by exploiting MCNPX codes, and the generated data were found to match with theoretical WinXCOM results. Next, other crucial photon attenuation parameters, effective atomic number (Zeff), Half Value Layer (HVL), and Mean Free Path (MFP), were gotten out using μ/ρ values. It was seen that Er20Tm20 and Er20Tb20 samples replaced with Er by Gd had the highest Zeff and μ/ρ values, whereas HVL and MFP values were the smallest among the other glassy alloys. Geometric progression (GP) procedure was enjoyed to achieve the exposure and energy absorption buildup factors (EBF and EABF) for the glassy alloys proposed. EABFs and EBFs took the largest and lowest values for Gd25Tb25 and Er20Tm20, respectively, to the other samples. Furthermore, the glassy alloys' neutron reduction abilities were estimated by acquiring fast neutron removal cross-sections (∑R). It was noticed that the ∑R values of the glassy alloys are increased with the rising sample density and seen to be comparable to ∑R values of water and ordinary concrete. The results obtained from this study are important in that they show that glassy alloys can be used as radiation shielding. © 2021 The Author(s). Published by IOP Publishing Ltd