Release of VEGF from dental implant improves osteogenetic process: Preliminary in vitro tests

INTRODUCTION: During osseointegration process, the presence of an inflammatory event could negatively influence the proper osteogenetic ability of the implant surface. In order to reduce this possibility, an implementation of angiogenetic event through the release of Vascular Endothelial Growth Factor (VEGF) can be a tool as co-factor for osteoblastic differentiation. In this paper, novel dental implant surfaces enriched with VEGF have been tested. MATERIAL AND METHODS: The ability of VEGF-enriched titanium implants to improve the osteogenetic properties of Mesenchymal stem cells (MSC), also in the presence of an inflammatory environment, have been in vitro tested. Molecular biology, morphological analyses, and biochemical tests have been performed in order to confirm biological properties of these surfaces. RESULTS: Our results confirm that the presence of VEGF onto the implant surface is able not only to protect the cells from in vitro aging and from Reactive Oxygen Species (ROS) damage, but it also improves their osteogenic and endothelial differentiation, even in the presence of inflammatory cytokines. CONCLUSION: This study establishes a biologically powerful novel tool that could enhance bone repair in dental implant integration

Porcine bone scaffolds adsorb growth factors secreted by MSCs and improve bone tissue repair

An ideal tissue-engineered bone graft should have both excellent pro-osteogenesis and pro-angiogenesis properties to rapidly realize the bone regeneration in vivo . To meet this goal, in this work a porcine bone scaffold was successfully used as a Trojan horse to store growth factors produced by mesenchymal stem cells (MSCs). This new scaffold showed a time-dependent release of bioactive growth factors, such as vascular endothelial growth factor (VEGF) and basic fibroblast growth factor (bFGF), in vitro . The biological effect of the growth factors-adsorbed scaffold on the in vitro commitment of MSCs into osteogenic and endothelial cell phenotypes has been evaluated. In addition, we have investigated the activity of growth factor-impregnated granules in the repair of critical-size defects in rat calvaria by means of histological, immunohistochemical, and molecular biology analyses. Based on the results of our work bone tissue formation and markers for bone and vascularization were significantly increased by the growth factor-enriched bone granules after implantation. This suggests that the controlled release of active growth factors from porcine bone granules can enhance and promote bone regeneratio

Psychometric properties of the Hebrew Modified Dental Anxiety Scale in adult Israeli population

Dental anxiety results in the neglect of oral hygiene and poor oral health, requiring an accurate screening tool for dental practitioners to evaluate dental anxiety. The Modified Dental Anxiety Scale (MDAS) is frequently used cross-culturally. The present study aimed to assess the reliability and validity of the Hebrew version of the MDSA. A total of 553 (mean age 35.87 years, SD = 13.14) Israeli participants were recruited through means of social media, mailing lists, and forums. The sample was randomly divided into two population sets. Dental anxiety was evaluated using the Hebrew version of the MDAS. The psychometric evaluation consisted of exploratory factor analysis (study 1, n = 274) and confirmatory factor analysis (study 2, n = 279). Cronbach’s alpha coefficient was used to assess internal consistency. Results showed high internal consistency (0.93) for the Hebrew version of the MDAS. Confirmatory factor analysis showed a single factor solution. Findings demonstrated 13.4% of Israeli participants with dental anxiety. Younger participants, females, participants with lower education, lower income, and more religious participants reported higher dental anxiety. In conclusion, the Hebrew version of the MDAS demonstrated high reliability and validity. It is recommended to use the Hebrew version of the MDAS to evaluate dental anxiety in Israeli dental settings.Publisher PDFPeer reviewe

Artificial Intelligence Application in Assessment of Panoramic Radiographs

The aim of this study was to assess the reliability of the artificial intelligence (AI) automatic evaluation of panoramic radiographs (PRs). Thirty PRs, covering at least six teeth with the possibility of assessing the marginal and apical periodontium, were uploaded to the Diagnocat (LLC Diagnocat, Moscow, Russia) account, and the radiologic report of each was generated as the basis of automatic evaluation. The same PRs were manually evaluated by three independent evaluators with 12, 15, and 28 years of experience in dentistry, respectively. The data were collected in such a way as to allow statistical analysis with SPSS Statistics software (IBM, Armonk, NY, USA). A total of 90 reports were created for 30 PRs. The AI protocol showed very high specificity (above 0.9) in all assessments compared to ground truth except from periodontal bone loss. Statistical analysis showed a high interclass correlation coefficient (ICC > 0.75) for all interevaluator assessments, proving the good credibility of the ground truth and the reproducibility of the reports. Unacceptable reliability was obtained for caries assessment (ICC = 0.681) and periapical lesions assessment (ICC = 0.619). The tested AI system can be helpful as an initial evaluation of screening PRs, giving appropriate credibility reports and suggesting additional diagnostic methods for more accurate evaluation if needed

Unveiling the association between body image dissatisfaction and dental anxiety

Background: Increased demands for invasive and non-invasive treatments related to body image disturbances are seen worldwide. These demands may be related to body image dissatisfaction. No study to date investigated the relationship between body image dissatisfaction and dental anxiety (namely, anticipatory dental anxiety and treatment dental anxiety) among a non-clinical population. The current study aims to unveil such relationships. Methods: Dentally anxious people may choose to ‘cope’ with their anxiety via unnecessary invasive procedures related to their body image dissatisfaction. In the current study, 553 individuals completed an online survey assessing their dental anxiety, dental neglect, and body image via self-report questionnaires. Results: Body image dissatisfaction was significantly correlated with dental anxiety. In contrast to previous studies, dental neglect was negatively associated with dental anxiety. Additionally, no link was found between body image dissatisfaction and dental neglect. Conclusions: The current study highlights the importance of addressing these factors prior to invasive procedures.Publisher PDFPeer reviewe

Comparison between Micro-Computed Tomography and Cone-Beam Computed Tomography in the Assessment of Bone Quality and a Long-Term Volumetric Study of the Augmented Sinus Grafted with an Albumin Impregnated Allograft

The purpose of our study was to compare micromorphometric data obtained by cone-beam computed-tomography (CBCT) and microcomputed-tomography (micro-CT) of the augmented sinus and to evaluate the long-term stability of the bone gain achieved using BoneAlbumin. Sinus lifts, and after 6-months, healing bone-biopsy and implant placement were carried out. Specimens were analyzed by micro-CT. A total of 16 samples were collected from nine patients (mean age 54.7 ± 6.5 years). Pre-, postoperative, and 3-year control CBCT-data were registered to determine from where the biopsy samples were harvested. Micromorphometric variables were calculated from the micro-CT- and CBCT-data, and their correlation was determined by Spearman's test. The volume of augmented bone was calculated at the time of implant placement and after 3 years. A positive correlation was found between bone-volume fraction, trabecular-separation, open-, and total-porosity, while a negative correlation was found between trabecular-thickness obtained from CBCT- and micro-CT-data (p < 0.05). Mean volumetric reduction of 39.28% (11.88–60.02%) was observed. Correlation of CBCT- and micro-CT-data suggested that micromorphometric analysis of CBCT reconstructions of the augmented sinuses provided reliable information on the microarchitecture of augmented bone. CBCT as a modality might be adequate in the analysis of bone quality in the augmented sinus. At the 3-year, control sinus grafts showed volumetric stability

Ba (the Inner&Outer) and Knowledge Creation : Chiba Glocalism

This was a farewell lecture at Chiba University in commemoration of my retirement after having served the university and community for 30 years. The development process of Chiba School in International Management Field Studies was introduced and reviewe村山元英先生退官記念

Microarchitecture of the Augmented Bone Following Sinus Elevation with an Albumin Impregnated Demineralized Freeze-Dried Bone Allograft (BoneAlbumin) versus Anorganic Bovine Bone Mineral: A Randomized Prospective Clinical, Histomorphometric, and Micro-Computed Tomography Study

Serum albumin has been identified as an endogenous protein that is integral to early bone regeneration. We hypothesized that albumin addition to allografts may result in better bone remodeling than what can be achieved with anorganic xenografts. Sinus elevations were performed at 32 sites of 18 patients with the lateral window technique. Sites either received filling with an anorganic bovine bone mineral (ABBM, BioOss, Geistlich, CH) or albumin impregnated allograft (BoneAlbumin, OrthoSera, AT). After 6-months patients received dental implants and 16 bone core biopsy samples were obtained from the ABBM filled, and 16 from the BoneAlbumin augmented sites. The biopsies were examined by histomorphometry and µCT. Percentage of the residual graft in the BoneAlbumin group was 0–12.7%, median 5.4% vs. ABBM 6.3–35.9%, median 16.9%, p < 0.05. Results of the µCT analysis showed that the microarchitecture of the augmented bone in the BoneAlbumin group resembles that of the native maxilla in morphometric parameters Trabecular Pattern Factor and Connectivity. Our data show that while ABBM successfully integrates into the newly formed bone tissue as persisting particles, BoneAlbumin is underway towards complete remodeling with new bone closely resembling that of the intact maxilla. Serum albumin has been identified as an endogenous protein that is integral to early bone regeneration. We hypothesized that albumin addition to allografts may result in better bone remodeling than what can be achieved with anorganic xenografts. Sinus elevations were performed at 32 sites of 18 patients with the lateral window technique. Sites either received filling with an anorganic bovine bone mineral (ABBM, BioOss, Geistlich, CH) or albumin impregnated allograft (BoneAlbumin, OrthoSera, AT). After 6-months patients received dental implants and 16 bone core biopsy samples were obtained from the ABBM filled, and 16 from the BoneAlbumin augmented sites. The biopsies were examined by histomorphometry and microCT. Percentage of the residual graft in the BoneAlbumin group was 0-12.7%, median 5.4% vs. ABBM 6.3-35.9%, median 16.9%, p < 0.05. Results of the microCT analysis showed that the microarchitecture of the augmented bone in the BoneAlbumin group resembles that of the native maxilla in morphometric parameters Trabecular Pattern Factor and Connectivity. Our data show that while ABBM successfully integrates into the newly formed bone tissue as persisting particles, BoneAlbumin is underway towards complete remodeling with new bone closely resembling that of the intact maxilla

Use of PRP, PRF and CGF in Periodontal Regeneration and Facial Rejuvenation—A Narrative Review

Growth factors (GFs) play a vital role in cell proliferation, migration, differentiation and angiogenesis. Autologous platelet concentrates (APCs) which contain high levels of GFs make them especially suitable for periodontal regeneration and facial rejuvenation. The main generations of APCs presented are platelet-rich plasma (PRP), platelet-rich fibrin (PRF) and concentrated growth factor (CGF) techniques. The purpose of this review is to provide the clinician with an overview of APCs’ evolution over the past decade in order to give reliable and useful information to be used in clinical work. This review summarizes the most interesting and novel articles published between 1997 and 2020. Electronic and manual searches were conducted in the following databases: Pubmed, Scopus, Cochrane Library and Embase. The following keywords were used: growth factors, VEGF, TGF-b1, PRP, PRF, CGF and periodontal regeneration and/or facial rejuvenation. A total of 73 articles were finally included. The review then addresses the uses of the three different techniques in the two disciplines, as well as the advantages and limitations of each technique. Overall, PRP is mainly used in cases of hard and soft tissue procedures, while PRF is used in gingival recession and the treatment of furcation and intrabony defects; CGF is mainly used in bone regeneration

Clinical Influence of Mandibular Flexure on Oral Rehabilitation: Narrative Review

Aim: The current paper aims to review mandibular flexure and its clinical implications in the field of oral rehabilitation. Mandibular flexure is a deformity of the mandible, which occurs during jaw movements. Methods and Materials: An electronic database search was conducted using the PRISM model, with a total of 49 articles included. Results: Mandibular flexure affects various stages of oral rehabilitation treatments. Effects of mandibular flexure are more significant in periodontal patients, and in implant-supported restorations, compared to natural teeth, due to differences in the force absorption by the periodontal ligament. Various adjustments must be made to the prosthodontic framework to enable long-term survival of the restorative treatments. Conclusions: Dental practitioners should pay attention to the following: (1) digital impressions are preferred over conventional; (2) mouth opening should be kept to a minimum (as possible, up to 10&ndash;20 mm) while also avoiding any anterior movements of the mandible (protrusion); (3) the number of abutment teeth should be kept to a minimum; (4) structures in the lower jaw should be splitted; (5) non-rigid connectors should be used to reduce the effort exerted; (6) in periodontal patients, the preference is for short-span restorations and non-rigid connectors; (7) in implant-supported restorations, it is preferable to divide the framework into two or three segments, utilizing rigid materials with a low elastic modulus. There is no agreement in the literature about the preferred location of the implants in the jaw