Characterization of the ALPIDE Detector with Proton Beams for the Development of a Prototype Computed Tomography Machine at the University of Bergen

In conventional radio therapy, photons is used in the treatment. Treatment with protons, however, greatly reduce the energy which is deposited in healthy tissue surrounding the tumor. The aim for the pCT group at the University in Bergen is to develop an imaging modality using protons. The motivation for this is to accurately locate the Bragg-peak, which is the region where the protons deposit the maximum of their energy. At the moment conventional CT scans are used to map the inner structures of a patient. The relation between photon attenuation and stopping power is not one-to-one. Thus this leads to uncertainties in the location of the Bragg-peak for protons. The design proposed by the pCT group at UIB is one that aims to have one detector to both track the particles and measure the energy deposition of the traversing protons. The detector which was chosen for this purpose, was the ALPIDE detector developed for the ITS upgrade at CERN. It has a high granularity and is thus able to track the protons efficiently. This thesis will look into how the ALPIDE detector efficiently measures the energy deposition of non MIP. It focuses on how the signal from the traversing particles behaves under variation of different parameters, before looking into the behavior of the ALPIDE when exposed to a high LET proton beam. Previous characterizations of the ALPIDE have focused on MIP, while this is some of the earlier work with heavier particles. The ALPIDE was able to distinguish the energy deposited with varying LET, especially in the region where the LET is constant among the particles traversing the ALPIDE, the cluster size of individual particles can be a good indication on energy deposited. It has thus shown promising signs that it will be able to perform well in the proposed setup of the prototype pCT designed by the pCT group at the University of Bergen.Masteroppgave i fysikkMAMN-PHYSPHYS39

Image quality of list-mode proton imaging without front trackers

List mode proton imaging relies on accurate reconstruction of the proton most likely path (MLP) through the patient. This typically requires two sets of position sensitive detector systems, one upstream (front) and one downstream (rear) of the patient. However, for a clinical implementation it can be preferable to omit the front trackers (single-sided proton imaging). For such a system, the MLP can be computed from information available through the beam delivery system and the remaining rear tracker set. In this work, we use Monte Carlo simulations to compare a conventional double-sided (using both front and rear detector systems) with a single-sided system (only rear detector system) by evaluating the spatial resolution of proton radiographs (pRad) and proton CT images (pCT) acquired with these set-ups. Both the pencil beam spot size, as well as the spacing between spots was also adjusted to identify the impact of these beam parameters on the image quality. Relying only on the pencil beam central position for computing the MLP resulted in severe image artifacts both in pRad and pCT. Using the recently extended-MLP formalism that incorporate pencil beam uncertainty removed these image artifacts. However, using a more focused pencil beam with this algorithm induced image artifacts when the spot spacing was the same as the beam spot size. The spatial resolution tested with a sharp edge gradient technique was reduced by 40% for single-sided (MTF10% = 3.0 lp/cm) compared to double-sided (MTF10% = 4.9 lp/cm) pRad with ideal tracking detectors. Using realistic trackers the difference decreased to 30%, with MTF10% of 4.0 lp/cm for the realistic double-sided and 2.7 lp/cm for the realistic single-sided setup. When studying an anthropomorphic paediatric head phantom both single- and double-sided set-ups performed similarly where the difference in water equivalent thickness (WET) between the two set-ups were less than 0.01 mm in homogeneous areas of the head. Larger discrepancies between the two set-ups were visible in high density gradients like the facial structures. A complete CT reconstruction of a Catphan$^{\circledR}$ module was performed. Assuming ideal detectors, the obtained spatial resolution was 5.1 lp/cm for double-sided and 3.8 lp/cm for the single-sided setup. Double- and single-sided pRad with realistic tracker properties returned a spatial resolution of 3.8 lp/cm and 3.2 lp/cm, respectively. Future studies should investigate the development of dedicated reconstruction algorithms targeted for single-sided particle imaging.publishedVersio

Uncertainty-aware spot rejection rate as quality metric for proton therapy using a digital tracking calorimeter

Objective. Proton therapy is highly sensitive to range uncertainties due to the nature of the dose deposition of charged particles. To ensure treatment quality, range verification methods can be used to verify that the individual spots in a pencil beam scanning treatment fraction match the treatment plan. This study introduces a novel metric for proton therapy quality control based on uncertainties in range verification of individual spots. Approach. We employ uncertainty-aware deep neural networks to predict the Bragg peak depth in an anthropomorphic phantom based on secondary charged particle detection in a silicon pixel telescope designed for proton computed tomography. The subsequently predicted Bragg peak positions, along with their uncertainties, are compared to the treatment plan, rejecting spots which are predicted to be outside the 95% confidence interval. The such-produced spot rejection rate presents a metric for the quality of the treatment fraction. Main results. The introduced spot rejection rate metric is shown to be well-defined for range predictors with well-calibrated uncertainties. Using this method, treatment errors in the form of lateral shifts can be detected down to 1 mm after around 1400 treated spots with spot intensities of 1 × 107 protons. The range verification model used in this metric predicts the Bragg peak depth to a mean absolute error of 1.107 ± 0.015 mm. Significance. Uncertainty-aware machine learning has potential applications in proton therapy quality control. This work presents the foundation for future developments in this area.publishedVersio

Production of charged pions, kaons, and (anti-)protons in Pb-Pb and inelastic pp collisions at √sNN=5.02 TeV

Midrapidity production of π±, K±, and (¯p)p measured by the ALICE experiment at the CERN Large Hadron Collider, in Pb-Pb and inelastic pp collisions at √sNN=5.02 TeV, is presented. The invariant yields are measured over a wide transverse momentum (pT) range from hundreds of MeV/c up to 20 GeV/c. The results in Pb-Pb collisions are presented as a function of the collision centrality, in the range 0–90%. The comparison of the pT-integrated particle ratios, i.e., proton-to-pion (p/π) and kaon-to-pion (K/π) ratios, with similar measurements in Pb-Pb collisions at √sNN=2.76 TeV show no significant energy dependence. Blast-wave fits of the pT spectra indicate that in the most central collisions radial flow is slightly larger at 5.02 TeV with respect to 2.76 TeV. Particle ratios (p/π, K/π) as a function of pT show pronounced maxima at pT≈3 GeV/c in central Pb-Pb collisions. At high pT, particle ratios at 5.02 TeV are similar to those measured in pp collisions at the same energy and in Pb-Pb collisions at √sNN=2.76 TeV. Using the pp reference spectra measured at the same collision energy of 5.02 TeV, the nuclear modification factors for the different particle species are derived. Within uncertainties, the nuclear modification factor is particle species independent for high pT and compatible with measurements at √sNN=2.76 TeV. The results are compared to state-of-the-art model calculations, which are found to describe the observed trends satisfactorily.publishedVersio

Measurement of isolated photon-hadron correlations in √sNN = 5.02 TeV pp and p-Pb collisions

This paper presents isolated photon-hadron correlations using pp and p-Pb data collected by the ALICE detector at the LHC. For photons with |η|<0.67 and 12<pT<40 GeV/c, the associated yield of charged particles in the range |η|<0.80 and 0.5<pT<10 GeV/c is presented. These momenta are much lower than previous measurements at the LHC. No significant difference between pp and p-Pb is observed, with Pythia 8.2 describing both data sets within uncertainties. This measurement constrains nuclear effects on the parton fragmentation in p-Pb collisions, and provides a benchmark for future studies of Pb-Pb collisions.publishedVersio

Constraining the Chiral Magnetic Effect with charge-dependent azimuthal correlations in Pb-Pb collisions at sNN\sqrt{s_{NN}} = 2.76 and 5.02 TeV

Systematic studies of charge-dependent two- and three-particle correlations in Pb-Pb collisions at $\sqrt{s_{NN}}$ = 2.76 and 5.02 TeV used to probe the Chiral Magnetic Effect (CME) are presented. These measurements are performed for charged particles in the pseudorapidity (η) and transverse momentum (pT) ranges |η| < 0.8 and 0.2 < pT < 5 GeV/c. A significant charge-dependent signal that becomes more pronounced for peripheral collisions is reported for the CME-sensitive correlators γ1, 1 = 〈cos(φα + φβ − 2Ψ2)〉 and γ1, − 3 = 〈cos(φα − 3φβ + 2Ψ2)〉. The results are used to estimate the contribution of background effects, associated with local charge conservation coupled to anisotropic flow modulations, to measurements of the CME. A blast-wave parametrisation that incorporates local charge conservation tuned to reproduce the centrality dependent background effects is not able to fully describe the measured γ1,1. Finally, the charge and centrality dependence of mixed-harmonics three-particle correlations, of the form γ1, 2 = 〈cos(φα + 2φβ − 3Ψ3)〉, which are insensitive to the CME signal, verify again that background contributions dominate the measurement of γ1,1.publishedVersio

J/ψ elliptic and triangular flow in Pb-Pb collisions at √sNN = 5.02 TeV

The inclusive J/ψ elliptic (v2) and triangular (v3) flow coefficients measured at forward rapidity (2.5 < y < 4) and the v2 measured at midrapidity (|y| < 0.9) in Pb-Pb collisions at sNN−−−√ = 5.02 TeV using the ALICE detector at the LHC are reported. The entire Pb-Pb data sample collected during Run 2 is employed, amounting to an integrated luminosity of 750 μb−1 at forward rapidity and 93 μb−1 at midrapidity. The results are obtained using the scalar product method and are reported as a function of transverse momentum pT and collision centrality. At midrapidity, the J/ψ v2 is in agreement with the forward rapidity measurement. The centrality averaged results indicate a positive J/ψ v3 with a significance of more than 5σ at forward rapidity in the pT range 2 < pT < 5 GeV/c. The forward rapidity v2, v3, and v3/v2 results at low and intermediate pT (pT ≲ 8 GeV/c) exhibit a mass hierarchy when compared to pions and D mesons, while converging into a species-independent curve at higher pT. At low and intermediate pT, the results could be interpreted in terms of a later thermalization of charm quarks compared to light quarks, while at high pT, path-length dependent effects seem to dominate. The J/ψ v2 measurements are further compared to a microscopic transport model calculation. Using a simplified extension of the quark scaling approach involving both light and charm quark flow components, it is shown that the D-meson vn measurements can be described based on those for charged pions and J/ψ flow.publishedVersio

J/ψ production as a function of charged-particle multiplicity in p-Pb collisions at √sNN = 8.16 TeV

Inclusive J/ψ yields and average transverse momenta in p-Pb collisions at a center-of-mass energy per nucleon pair sNN−−−√ = 8.16 TeV are measured as a function of the charged-particle pseudorapidity density with ALICE. The J/ψ mesons are reconstructed at forward (2.03 < ycms < 3.53) and backward (−4.46 < ycms < −2.96) center-of-mass rapidity in their dimuon decay channel while the charged-particle pseudorapidity density is measured around midrapidity. The J/ψ yields at forward and backward rapidity normalized to their respective average values increase with the normalized charged-particle pseudorapidity density, the former showing a weaker increase than the latter. The normalized average transverse momenta at forward and backward rapidity manifest a steady increase from low to high charged-particle pseudorapidity density with a saturation beyond the average value.publishedVersio

Elliptic and triangular flow of (anti)deuterons in Pb-Pb collisions at √sNN=5.02 TeV

The measurements of the (anti)deuteron elliptic flow (v2) and the first measurements of triangular flow (v3) in Pb-Pb collisions at a center-of-mass energy per nucleon-nucleon collision √sNN = 5.02 TeV are presented. A mass ordering at low transverse momentum (pT) is observed when comparing these measurements with those of other identified hadrons, as expected from relativistic hydrodynamics. The measured (anti)deuteron v2 lies between the predictions from the simple coalescence and blast-wave models, which provide a good description of the data only for more peripheral and for more central collisions, respectively. The mass number scaling, which is violated for v2, is approximately valid for the (anti)deuterons v3. The measured v2 and v3 are also compared with the predictions from a coalescence approach with phase-space distributions of nucleons generated by iebe-vishnu with ampt initial conditions coupled with urqmd, and from a dynamical model based on relativistic hydrodynamics coupled to the hadronic afterburner smash. The model predictions are consistent with the data within the uncertainties in midcentral collisions, while a deviation is observed in the most central collisions.publishedVersio

Investigation of the p–Σ0 interaction via femtoscopy in pp collisions

This Letter presents the first direct investigation of the p–Σ0 interaction, using the femtoscopy technique in high-multiplicity pp collisions at √s = 13 TeV measured by the ALICE detector. The Σ0 is reconstructed via the decay channel to Λγ , and the subsequent decay of Λ to pπ−. The photon is detected via the conversion in material to e+e− pairs exploiting the capability of the ALICE detector to measure electrons at low transverse momenta. The measured p–Σ0 correlation indicates a shallow strong interaction. The comparison of the data to several theoretical predictions obtained employing the Correlation Analysis Tool using the Schrödinger Equation (CATS) and the Lednický–Lyuboshits approach shows that the current experimental precision does not yet allow to discriminate between different models, as it is the case for the available scattering and hypernuclei data. Nevertheless, the p–Σ0 correlation function is found to be sensitive to the strong interaction, and driven by the interplay of the different spin and isospin channels. This pioneering study demonstrates the feasibility of a femtoscopic measurement in the p–Σ0 channel and with the expected larger data samples in LHC Run 3 and Run 4, the p–Σ0 interaction will be constrained with high precision.publishedVersio