92 research outputs found
アンテリアル ガイダンス ノ シンダン ト チリョウ
Report: The Relative Merits of the Modified Sag-Tape Method for Determining Instream Flow Requirement
Electron identification using the TOPAZ detector at TRISTAN
We present an electron-identification method using the time-projection
chamber and the lead-glass calorimeter in the TOPAZ detector system. Using this
method we have achieved good electron identification against hadron backgrounds
over a wide momentum range in the hadronic events produced by both
single-photon exchange and two-photon processes. Pion-rejection factors and
electron efficiencies were 163 and 68.4\% for high- electrons and 137 and
42.7\% for low- electrons in the single-photon-exchange process, and 8600
and 36.0\% for the two-photon process, respectively.Comment: 32 pages, latex format (article), 24 figures, submitted for
publication
Successful stenting of the ductus venosus in 2 neonates with asplenia syndrome complicated by infracardiac type total anomalous pulmonary venous connection
SummaryIn the neonatal period, the surgical mortality of palliation is extremely high for asplenia syndrome complicated by single ventricle combined with total anomalous pulmonary venous connection (TAPVC). Recently, stent implantation for the pulmonary venous drainage route soon after birth has been used instead of surgery to prevent pulmonary venous occlusion and to maintain stable hemodynamics in the neonatal period or in early infancy. Here, we successfully implanted stents in the ductus venosus (DV) in 2 neonates with asplenia syndrome complicated by infracardiac type TAPVC. The first patient was a 3-day-old male neonate with severe cyanosis. Immediately after TAPVC was diagnosed, we implanted a stent in the DV. The second patient was a 0-day-old female neonate. She was diagnosed as TAPVC by fetal echocardiogram. After the scheduled delivery, a stent was successfully implanted. We believe that stent implantation in the DV in the neonatal period is effective and less invasive than surgery in patients with infracardiac type TAPVC
Development of gelatin hydrogel nonwoven fabrics (Genocel®) as a novel skin substitute in murine skin defects
Introduction: Genocel is an emerging material, used in cell culture, with high mechanical strength and good cytocompatibility. Based on these characteristics, Genocel is considered a promising skin substitute for wound healing. In this study, we explored the possibility of using Genocel as a skin substitute for murine skin defects and compared it with a conventional skin substitute. Methods: Sheets of Genocel and Pelnac were applied to skin defects created on the backs of mice. On days 7, 14, and 21, the remaining wound area was evaluated and specimens were harvested for HE, Azan, anti-CD31, CD68, and CD163 staining to assess neoepithelialization, granulation tissue, capillary formation, and macrophage infiltration. Results: No significant differences in the wound area or neoepithelium length were observed between groups. The number of newly formed capillaries in the Genocel group was significantly higher than that in the Pelnac group on day 7 (p < 0.05). In contrast, granulation tissue formation in the Pelnac group was greater than that in the Genocel group on day 14 (p < 0.05). Regarding macrophage infiltration, the pan-macrophage number, M2 macrophage number, and M2 ratio in the Pelnac group were higher than those in the Genocel group on day 14 (p < 0.05). In other aspects, the two materials displayed comparable behavior. Conclusions: Genocel can be used as a skin substitute equivalent to the conventional one. In addition, Genocel accelerated capillary formation, which is more appropriate than conventional treatments for chronic skin ulcers, such as diabetic ulcers
Recurrent TMJ open lock
Patient: This report describes the case of a 51-year-old male patient who initially presented at age 23 with a habitual intermittent open lock (at > 35 mm) in the left temporomandibular joint (TMJ). The patient was able to manage this affliction through rapid-repetition jaw opening and closing. Tomography of the joint showed no irregular morphology, but intraoral examination revealed an occlusal interference at the mandibular left third molar during leftwards excursion. For this patient, alteration of lateral guidance using a palatal plate attached to the maxillary left canine precluded this intermittent open lock, but at 22 years of age, the open lock recurred and could not be relieved by the patient, who was unable to assume an occlusal position. Because conservative treatment was ineffective, a pumping manipulation technique was applied to reduce the open lock, after which the patient has maintained good jaw function. MRI taken before and after repositioning indicated that abrupt reduction of a displaced articular disk was the cause of the open lock, and that this articular disk was restored to its proper position during the manipulation.
Discussion: Most TMJ open locks occur as anterior dislocation, where the mandibular head becomes trapped anterior to the articular eminences, causing excessive opening and difficulty closing. Our clinical findings from this patient indicate that open lock can occur through abrupt reduction of a displaced articular disk, particularly in patients with chronic internal derangement of the TMJ.
Conclusion: TMJ open lock can occur following abrupt reduction of a displaced articular disk
Bilateral Renal Cell Carcinoma and its Treatment
A report is presented on two cases of bilateral renal cell carcinoma together with a review of the literature. Bilateral renal cell carcinoma is rare and there is much controversy concerning its treatment. Our current experience supports conservative therapy for bilateral renal cell carcinoma
スパイラル CT オ モチイタ ガクカンセツ ノ サンジゲン ヒョウカホウ
Three-dimensional (3-D) image reconstructed from Computed Tomography (CT) data is an ef>cient method to evaluate temporomandibular joint (TMJ) morphologically. Even the 3-D image reconstructed from spiral CT data has some distortion, typically along to the table feed direction, very few studies were reported about accuracy of reconstructed 3-D image size. The purpose of this research was to evaluate the distortion on 3-D image reconstructed with spiral CT (Somatom Plas4, Siemens Co, Germany) quantitatively. We used three imaging targets, eight ceramic balls placed at corners of cubic frame, a calibration cube that has the CT value nearly equal to cortex bone of human dried mandibular head. We evaluated relation between a threshold level of CT image processing and reconstructed 3-D image size with a custom-made computer program. CT data of ceramic balls clari>ed changes of the reconstructed image, -0.215mm for table feed direction and less than ±0.006mm for the other directions. The calibration cube was used for the arrangement of optimal scanning condition (reconstruction mode, collimation, reconstitution interval) and evaluation of reconstructed image size. The distortion of the image was +0.207mm for table feed direction and less than +0.029mm for the other directions. Changes of dried skull TMJ image reconstructed with the optimal scanning condition were -1.463mm for lateral direction of the condylar head, -0.956mm for back and forth direction and -0.580mm for table feed direction. Results of this research suggested that the level of the 3-D image distortion was mostly affected with the scanning condition. And the size of 3-D image was susceptible to the threshold level of CT image processing. Consequently, we think that the standardization of scanning condition should be concerned for the quantitative evaluation of 3-D TMJ image using CT data
- …