Intrinsic speckle noise in in-line particle holography due to poly-disperse and continuous particle sizes

In-line particle holography is subject to image deterioration due to intrinsic speckle noise. The resulting reduction in the signal to noise ratio (SNR) of the replayed image can become critical for applications such as holographic particle velocimetry (HPV) and 3D visualisation of marine plankton. Work has been done to extend the mono-disperse model relevant to HPV to include poly-disperse particle fields appropriate for the visualisation of marine plankton. Continuous and discrete particle fields are both considered. It is found that random walk statistics still apply for the poly-disperse case. The speckle field is simply the summation of the individual speckle patterns due to each scatter size. Therefore the characteristic speckle parameter (which encompasses particle diameter, concentration and sample depth) is also just the summation of the individual spedde parameters. This reduces the SNR calculation to the same form as for the mono-disperse case. For the continuous situation three distributions, power, exponential and Gaussian are discussed with the resulting SNR calculated. The work presented here was performed as part of the Holomar project to produce a working underwater holographic camera for recording plankton

A coherent middle Pliocene magnetostratigraphy, Wanganui Basin, New Zealand

We document magnetostratigraphies for three river sections (Turakina, Rangitikei, Wanganui) in Wanganui Basin and interpret them as corresponding to the Upper Gilbert, the Gauss and lower Matuyama Chrons of the Geomagnetic Polarity Timescale, in agreement with foraminiferal biostratigraphic datums. The Gauss-Gilbert transition (3.58 Ma) is located in both the Turakina and Wanganui River sections, while the Gauss-Matuyama transition (2.58 Ma) is located in all three sections, as are the lower and upper boundaries of the Mammoth (3.33–3.22 Ma) and Kaena (3.11–3.04 Ma) Subchrons. Our interpretations are based in part on the re-analysis of existing datasets and in part on the acquisition and analysis of new data, particularly for the Wanganui River section. The palaeomagnetic dates of these six horizons provide the only numerical age control for a thick (up to 2000 m) mudstone succession (Tangahoe Mudstone) that accumulated chiefly in upper bathyal and outer neritic palaeoenvironments. In the Wanganui River section the mean sediment accumulation rate is estimated to have been about 1.8 m/k.y., in the Turakina section it was about 1.5 m/k.y., and in the Rangitikei section, the mean rate from the beginning of the Mammoth Subchron to the Hautawa Shellbed was about 1.1 m/k.y. The high rates may be associated with the progradation of slope clinoforms northward through the basin. This new palaeomagnetic timescale allows revised correlations to be made between cyclothems in the Rangitikei River section and the global Oxygen Isotope Stages (OIS) as represented in Ocean Drilling Program (ODP) Site 846. The 16 depositional sequences between the end of the Mammoth Subchron and the Gauss-Matuyama Boundary are correlated with OIS MG2 to 100. The cyclothems average 39 k.y. in duration in our age model, which is close to the 41 k.y. duration of the orbital obliquity cycles. We support the arguments advanced recently in defence of the need for local New Zealand stages as a means of classifying New Zealand sedimentary successions, and strongly oppose the proposal to move stage boundaries to selected geomagnetic polarity transitions. The primary magnetisation of New Zealand mudstone is frequently overprinted with secondary components of diagenetic origin, and hence it is often difficult to obtain reliable magnetostratigraphic records. We suggest specific approaches, analytical methods, and criteria to help ensure robustness and coherency in the palaeomagnetic identification of chron boundaries in typical New Zealand Cenozoic mudstone successions

InGaN nano-ring structures for high-efficiency light emitting diodes

A technique based on the Fresnel diffraction effect for the fabrication of nano-scale site-controlled ring structures in InGaN/GaN multi-quantum well structures has been demonstrated. The ring structures have an internal diameter of 500 nm and a wall width of 300 nm. A 1 cm-1 Raman shift has been measured, signifying substantial strain relaxation from the fabricated structure. The 9 nm blueshift observed in the cathodoluminescence spectra can be attributed to band filling and/or screening of the piezoelectric field. A light emitting diode based on this geometry has been demonstrated. © 2005 American Institute of Physics.published_or_final_versio

A systematic comparison of polar and semipolar Si-doped AlGaN alloys with high AlN content

Abstract With a view to supporting the development of ultra-violet light-emitting diodes and related devices, the compositional, emission and morphology properties of Si-doped n-type Al x Ga1-x N alloys are extensively compared. This study has been designed to determine how the different Al x Ga1-x N crystal orientations (polar (0001) and semipolar (11–22)) affect group-III composition and Si incorporation. Wavelength dispersive x-ray (WDX) spectroscopy was used to determine the AlN mole fraction (x ≈ 0.57–0.85) and dopant concentration (3 × 1018–1 × 1019 cm−3) in various series of Al x Ga1-x N layers grown on (0001) and (11–22) AlN/sapphire templates by metalorganic chemical vapor deposition. The polar samples exhibit hexagonal surface features with Ga-rich boundaries confirmed by WDX mapping. Surface morphology was examined by atomic force microscopy for samples grown with different disilane flow rates and the semipolar samples were shown to have smoother surfaces than their polar counterparts, with an approximate 15% reduction in roughness. Optical characterization using cathodoluminescence (CL) spectroscopy allowed analysis of near-band edge emission in the range 4.0–5.4 eV as well as various deep impurity transition peaks in the range 2.7–4.8 eV. The combination of spatially-resolved characterization techniques, including CL and WDX, has provided detailed information on how the crystal growth direction affects the alloy and dopant concentrations.</jats:p

Health care logistics: who has the ball during disaster?

In contemporary organizations, a wide gamut of options is available for sustaining and supporting health care operations. When disaster strikes, despite having tenable plans for routine replenishment and operations, many organizations find themselves ill-prepared, ill-equipped, and without effective mechanisms in place to sustain operations during the immediate aftermath of a crisis. Health care operations can be abruptly halted due to the non-availability of supply

Analysis of defect-related inhomogeneous electroluminescence in InGaN/GaN QW LEDs

The inhomogeneous electroluminescence (EL) of InGaN/GaN quantum well light emitting diode structures was investigated in this study. Electroluminescence hyperspectral images showed that inhomogeneities in the form of bright spots exhibited spectrally blue-shifted and broadened emission. Scanning electron microscopy combined with cathodoluminescence (SEM-CL) was used to identify hexagonal pits at the centre of approximately 20% of these features. Scanning transmission electron microscopy imaging with energy dispersive X-ray spectroscopy (STEM-EDX) indicated there may be p-doped AlGaN within the active region caused by the presence of the pit. Weak beam dark-field TEM (WBDF-TEM) revealed the presence of bundles of dislocations associated with the pit, suggesting the surface features which cause the inhomogeneous EL may occur at coalescence boundaries, supported by trends in the number of features observed across the wafer.The European Research Council has provided financial support under the European Community’s Seventh Framework Programme/ ERC grant agreement no. 279361 (MACONS).This is the author accepted manuscript. The final version is available from Elsevier via http://dx.doi.org/10.1016/j.spmi.2016.03.03

Football-induced fatigue in hypoxia impairs repeated sprint ability and perceptual-cognitive skills

The present study investigated the effects of football-induced fatigue during hypoxia on RS and perceptual-cognitive skills. Ten male semi-professional football players underwent four sessions; a control session (0-m) to quantify RS in a non-fatigued state; and three further sessions at hypoxia (0-m;1500-m;3000-m) examining RS and perceptual-cognitive skill responses for a given physical workload. Anticipation and decision-making accuracy were obtained at the 30-min mark of each half. The mean number of trials (%) in which the player made the correct response was used for analysis. HR, TC, RPE and % saturation of O2 were measured during the warm-up, football-induced fatigue and RS test. It was found that HR, RPE and % saturation of O2 were different between conditions (P<0.05; ES=0.44-6.13). Further, RS were affected by football-induced fatigue for DC (4.8%; P=0.019; ES=0.68) and AV (5.5%; P=0.006; ES=0.79). In hypoxia, it was observed that football-induced fatigue decreased by 6.5% in DC, 6.3% in AV and 3.1% in PV at 1500-m compared to 0-m (P<0.05). Further significant changes were found at 3000-m compared to 0-m decreasing 12.8% in DC, 12.8% in AV and 6.2% in PV (P<0.0005). More pronounced declines in perceptual-cognitive skills were found as altitude increased (5.0-12.5 %; P<0.05; ES=1.17-2.41) and between both halves (5.3-6.7 %; P<0.05). The data demonstrates that the RS test was highly sensitive to fatigue and hypoxia for a given physical load. Simulated matches in hypoxia revealed larger decreases, when compared to normoxia in RS and perceptual-cognitive skills, highlighting the need for optimal acclimatisation strategies, including physical and technical preparation, prior to playing a

Selective Affimers Recognise the BCL‐2 Family Proteins BCL‐xL and MCL‐1 through Noncanonical Structural Motifs

The BCL‐2 family is a challenging group of proteins to target selectively due to sequence and structural homologies across the family. Selective ligands for the BCL‐2 family regulators of apoptosis are useful as probes to understand cell biology and apoptotic signalling pathways, and as starting points for inhibitor design. We have used phage display to isolate Affimer reagents (non‐antibody‐binding proteins based on a conserved scaffold) to identify ligands for MCL‐1, BCL‐xL, BCL‐2, BAK and BAX, then used multiple biophysical characterisation methods to probe the interactions. We established that purified Affimers elicit selective recognition of their target BCL‐2 protein. For anti‐apoptotic targets BCL‐xL and MCL‐1, competitive inhibition of their canonical protein‐protein interactions is demonstrated. Co‐crystal structures reveal an unprecedented mode of molecular recognition; where a BH3 helix is normally bound, flexible loops from the Affimer dock into the BH3 binding cleft. Moreover, the Affimers induce a change in the target proteins towards a desirable drug‐bound‐like conformation. These proof‐of‐concept studies indicate that Affimers could be used as alternative templates to inspire the design of selective BCL‐2 family modulators and more generally other protein‐protein interaction inhibitors

Optical and structural properties of dislocations in InGaN

Threading dislocations in thick layers of InxGa1−xN (5% &amp;lt; x &amp;lt; 15%) have been investigated by means of cathodoluminescence, time-resolved cathodoluminescence, and molecular dynamics. We show that indium atoms segregate near dislocations in all the samples. This promotes the formation of In-N-In chains and atomic condensates, which localize carriers and hinder nonradiative recombination at dislocations. We note, however, that the dark halo surrounding the dislocations in the cathodoluminescence image becomes increasingly pronounced as the indium fraction of the sample increases. Using transmission electron microscopy, we attribute the dark halo to a region of lower indium content formed below the facet of the V-shaped pit that terminates the dislocation in low composition samples (x &amp;lt; 12%). For x &amp;gt; 12%, the facets of the V-defect featured dislocation bundles instead of the low indium fraction region. In this sample, the origin of the dark halo may relate to a compound effect of the dislocation bundles, of a variation of surface potential, and perhaps, of an increase in carrier diffusion length.ER-C Lindemann Trust Fellowshi