Electrochemical nanostructuring of (111) oriented GaAs crystals: From porous structures to nanowires

A comparative study of the anodization processes occurring at the GaAs(111)A and GaAs(111)B surfaces exposed to electrochemical etching in neutral NaCl and acidic HNO3 aqueous electrolytes is performed in galvanostatic and potentiostatic anodization modes. Anodization in NaCl electrolytes was found to result in the formation of porous structures with porosity controlled either by current under the galvanostatic anodization, or by the potential under the potentiostatic anodization. Possibilities to produce multilayer porous structures are demonstrated. At the same time, one-step anodization in a HNO3 electrolyte is shown to lead to the formation of GaAs triangular shape nanowires with high aspect ratio (400 nm in diameter and 100 μm in length). The new data are compared to those previously obtained through anodizing GaAs(100) wafers in alkaline KOH electrolyte. An IR photodetector based on the GaAs nanowires is demonstrated. © 2020 Monaico et al

Core–Shell GaAs-Fe Nanowire Arrays: Fabrication Using Electrochemical Etching and Deposition and Study of Their Magnetic Properties

The preparation of GaAs nanowire templates with the cost-effective electrochemical etching of (001) and (111)B GaAs substrates in a 1 M HNO3 electrolyte is reported. The electrochemical etching resulted in the obtaining of GaAs nanowires with both perpendicular and parallel orientations with respect to the wafer surface. Core–shell GaAs-Fe nanowire arrays have been prepared by galvanostatic Fe deposition into these templates. The fabricated arrays have been investigated by means of scanning electron microscopy (SEM) and vibrating sample magnetometry (VSM). The magnetic properties of the polycrystalline Fe nanotubes constituting the shells of the cylindrical structures, such as the saturation and remanence moment, squareness ratio, and coercivity, were analyzed in relation to previously reported data on ferromagnetic nanowires and nanotubes

Magnetic Properties of GaAs/NiFe Coaxial Core-Shell Structures

Uniform nanogranular NiFe layers with Ni contents of 65%, 80%, and 100% have been electroplated in the potentiostatic deposition mode on both planar substrates and arrays of nanowires prepared by the anodization of GaAs substrates. The fabricated planar and coaxial core-shell ferromagnetic structures have been investigated by means of scanning electron microscopy (SEM) and vibrating sample magnetometry (VSM). To determine the perspectives for applications, a comparative analysis of magnetic properties, in terms of the saturation and remanence moment, the squareness ratio, and the coercivity, was performed for structures with different Ni contents

Core–Shell Structures Prepared by Atomic Layer Deposition on GaAs Nanowires

GaAs nanowire arrays have been prepared by anodization of GaAs substrates. The nanowires produced on (111)B GaAs substrates were found to be oriented predominantly perpendicular to the substrate surface. The prepared nanowire arrays have been coated with thin ZnO or TiO2 layers by means of thermal atomic layer deposition (ALD), thus coaxial core–shell hybrid structures are being fabricated. The hybrid structures have been characterized by scanning electron microscopy (SEM) for the morphology investigations, by Energy Dispersive X-ray (EDX) and X-ray diffraction (XRD) analysis for the composition and crystal structure assessment, and by photoluminescence (PL) spectroscopy for obtaining an insight on emission polarization related to different recombination channels in the prepared core–shell structures

Modulation of Electrical Conductivity and Lattice Distortions in Burolk HVPE-Gwn GaN

The nature of self-organized three-dimensional structured architectures with spatially modulated electrical conductivity emerging in the process of hydride vapor phase epitaxial growth of single crystalline n-GaN wafers is revealed by photoelectrochemical etching. The amplitude of the carrier concentration modulation throughout the sample is derived from photoluminescence analysis and the localized heterogeneous piezoelectric response is demonstrated. The formation of such architectures is rationalized based on the generation of V-shaped pits and their subsequent overgrowth in variable direction. Detailed structure analysis with respect to X-ray diffraction and transmission electron microscopy gives striking evidence for inelastic strain to manifest in distortions of the P63mc wurtzite-type structure. The deviation from hexagonal symmetry by angular distortions of the β angle between the basal plane and c-axis is found to be of around 1°. It is concluded that the lattice distortions are generated by the misfit strains originating during crystal growth, which are slightly relaxed upon photoelectrochemical etching

Aero-TiO2 Prepared on the Basis of Networks of ZnO Tetrapods

In this paper, new aeromaterials are proposed on the basis of titania thin films deposited using atomic layer deposition (ALD) on a sacrificial network of ZnO microtetrapods. The technology consists of two technological steps applied after ALD, namely, thermal treatment at different temperatures and etching of the sacrificial template. Two procedures are applied for etching, one of which is wet etching in a citric acid aqua solution, while the other one is etching in a hydride vapor phase epitaxy (HVPE) system with HCl and hydrogen chemicals. The morphology, composition, and crystal structure of the produced aeromaterials are investigated depending on the temperature of annealing and the sequence of the technological steps. The performed photoluminescence analysis suggests that the developed aeromaterials are potential candidates for photocatalytic applications

ENGINEERING OF SEMICONDUCTOR COMPOUNDS VIA ELECTROCHEMICAL TECHNOLOGIES FOR NANO-MICROELECTRONIC APPLICATIONS

The paper is focused on electrochemical approaches for nanostructuring of semiconductor compounds with further applications in nano - microelectronic devices. A cost-effective technology for nanowires and nanotubes obtaining by pulsed electrochemical deposition is presented. Functionalization of elaborated nanostructures with gold or platinum via electroplating improves the properties of the nanostructures. An optimization of the varicap design to increase the capacitance is proposed and discussed as well as the optimization of pulsed electrochemical deposition of several hundred micrometer long Pt nanotubes is performed. Herein, the elaboration of contacts to GaAs nanowires via different approaches for photoelectrical investigations is reported

Rapid Synthesis And Characterization Of Micro And Nanostructures Of Molybdenum Trioxide

Micro - and nanostructures of molybdenum trioxide (MoO3) have been investigated intensively for sensorial and electrochromic systems. MoO 3 nanostructures were grown by a rapid thermal oxidation of molybdenum at 1000°C in oxygen environment. Its structural, morphological and optical properties were studied using scanning electron microscopy (SEM), X-ray diffraction (XRD), micro-Raman and optical transmission techniques. This work presents a new technique for facile synthesis of MoO3 nanostructures via thermal oxidation, and the results of exploration of their properties. MoO3 is found to consist of stratified long micro/nano-ribbons and nanowires promising for applications in sensor and other device structures. © 2013 IEEE