8,989 research outputs found
Excited heavy tetraquarks with hidden charm
The masses of the excited heavy tetraquarks with hidden charm are calculated
within the relativistic diquark-antidiquark picture. The dynamics of the light
quark in a heavy-light diquark is treated completely relativistically. The
diquark structure is taken into account by calculating the diquark-gluon form
factor. New experimental data on charmonium-like states above open charm
threshold are discussed. The obtained results indicate that X(3872), Y(4260),
Y(4360), Z(4248), Z(4433) and Y(4660) could be tetraquark states with hidden
charm.Comment: 11 page
Masses of light tetraquarks and scalar mesons in the relativistic quark model
Masses of the ground state light tetraquarks are dynamically calculated in
the framework of the relativistic diquark-antidiquark picture. The internal
structure of the diquark is taken into account by calculating the form factor
of the diquark-gluon interaction in terms of the overlap integral of the
diquark wave functions. It is found that scalar mesons with masses below 1 GeV:
f_0(600) (\sigma), K^*_0(800) (\kappa), f_0(980) and a_0(980) agree well with
the light tetraquark interpretation.Comment: 9 pages, Report-no adde
An alternative construction of B-M and B-T unitals in Desarguesian planes
We present a new construction of non-classical unitals from a classical
unital in . The resulting non-classical unitals are B-M unitals.
The idea is to find a non-standard model of with the
following three properties: 1. points of are those of ; 2.
lines of are certain lines and conics of ; 3. the points in
form a non-classical B-M unital in .
Our construction also works for the B-T unital, provided that conics are
replaced by certain algebraic curves of higher degree.Comment: Keywords: unital, desarguesian plane 11 pages; ISSN: 0012-365
Autonomous spacecraft attitude control using magnetic torquing only
Magnetic torquing of spacecraft has been an important mechanism for attitude control since the earliest satellites were launched. Typically a magnetic control system has been used for precession/nutation damping for gravity-gradient stabilized satellites, momentum dumping for systems equipped with reaction wheels, or momentum-axis pointing for spinning and momentum-biased spacecraft. Although within the small satellite community there has always been interest in expensive, light-weight, and low-power attitude control systems, completely magnetic control systems have not been used for autonomous three-axis stabilized spacecraft due to the large computational requirements involved. As increasingly more powerful microprocessors have become available, this has become less of an impediment. These facts have motivated consideration of the all-magnetic attitude control system presented here. The problem of controlling spacecraft attitude using only magnetic torquing is cast into the form of the Linear Quadratic Regulator (LQR), resulting in a linear feedback control law. Since the geomagnetic field along a satellite trajectory is not constant, the system equations are time varying. As a result, the optimal feedback gains are time-varying. Orbit geometry is exploited to treat feedback gains as a function of position rather than time, making feasible the onboard solution of the optimal control problem. In simulations performed to date, the control laws have shown themselves to be fairly robust and a good candidate for an onboard attitude control system
Segment Motion in the Reptation Model of Polymer Dynamics. II. Simulations
We present simulation data for the motion of a polymer chain through a
regular lattice of impenetrable obstacles (Evans-Edwards model). Chain lengths
range from N=20 to N=640, and time up to Monte Carlo steps. For we for the central segment find clear -behavior as an
intermediate asymptote. The also expected -range is not yet developed.
For the end segment also the -behavior is not reached. All these data
compare well to our recent analytical evaluation of the reptation model, which
shows that for shorter times (t \alt 10^{4}) the discreteness of the
elementary motion cannot be neglected, whereas for longer times and short
chains (N \alt 100) tube renewal plays an essential role also for the central
segment. Due to the very broad crossover behavior both the diffusion
coefficient and the reptation time within the range of our simulation do not
reach the asymptotic power laws predicted by reptation theory. We present
results for the center-of-mass motion, showing the expected intermediate
-behavior, but again only for very long chains. In addition we show
results for the motion of the central segment relative to the center of mass,
where in some intermediate range we see the expected increase of the effective
power beyond the -law, before saturation sets in. Analysis and
simulations agree on defining a new set of criteria as characteristic for
reptation of finite chains.Comment: 19 pages in latex plus 13 ps figures, submitted to J. Stat. Phys. on
September 18, 199
Segment Motion in the Reptation Model of Polymer Dynamics. I. Analytical Investigation
We analyze the motion of individual beads of a polymer chain using a discrete
version of De Gennes' reptation model that describes the motion of a polymer
through an ordered lattice of obstacles. The motion within the tube can be
evaluated rigorously, tube renewal is taken into account in an approximation
motivated by random walk theory. We find microstructure effects to be present
for remarkably large times and long chains, affecting essentially all present
day computer experiments. The various asymptotic power laws, commonly
considered as typical for reptation, hold only for extremely long chains.
Furthermore, for an arbitrary segment even in a very long chain, we find a rich
variety of fairly broad crossovers, which for practicably accessible chain
lengths overlap and smear out the asymptotic power laws. Our analysis suggests
observables specifically adapted to distinguish reptation from motions
dominated by disorder of the environment.Comment: 38 pages in latex plus 8 ps figures, submitted to J. Stat. Phys. on
September 18, 1997, please note part II on cond-mat/971006
Stability of negative ionization fronts: regularization by electric screening?
We recently have proposed that a reduced interfacial model for streamer
propagation is able to explain spontaneous branching. Such models require
regularization. In the present paper we investigate how transversal Fourier
modes of a planar ionization front are regularized by the electric screening
length. For a fixed value of the electric field ahead of the front we calculate
the dispersion relation numerically. These results guide the derivation of
analytical asymptotes for arbitrary fields: for small wave-vector k, the growth
rate s(k) grows linearly with k, for large k, it saturates at some positive
plateau value. We give a physical interpretation of these results.Comment: 11 pages, 2 figure
The analysis of polar clouds from AVHRR satellite data using pattern recognition techniques
The cloud cover in a set of summertime and wintertime AVHRR data from the Arctic and Antarctic regions was analyzed using a pattern recognition algorithm. The data were collected by the NOAA-7 satellite on 6 to 13 Jan. and 1 to 7 Jul. 1984 between 60 deg and 90 deg north and south latitude in 5 spectral channels, at the Global Area Coverage (GAC) resolution of approximately 4 km. This data embodied a Polar Cloud Pilot Data Set which was analyzed by a number of research groups as part of a polar cloud algorithm intercomparison study. This study was intended to determine whether the additional information contained in the AVHRR channels (beyond the standard visible and infrared bands on geostationary satellites) could be effectively utilized in cloud algorithms to resolve some of the cloud detection problems caused by low visible and thermal contrasts in the polar regions. The analysis described makes use of a pattern recognition algorithm which estimates the surface and cloud classification, cloud fraction, and surface and cloudy visible (channel 1) albedo and infrared (channel 4) brightness temperatures on a 2.5 x 2.5 deg latitude-longitude grid. In each grid box several spectral and textural features were computed from the calibrated pixel values in the multispectral imagery, then used to classify the region into one of eighteen surface and/or cloud types using the maximum likelihood decision rule. A slightly different version of the algorithm was used for each season and hemisphere because of differences in categories and because of the lack of visible imagery during winter. The classification of the scene is used to specify the optimal AVHRR channel for separating clear and cloudy pixels using a hybrid histogram-spatial coherence method. This method estimates values for cloud fraction, clear and cloudy albedos and brightness temperatures in each grid box. The choice of a class-dependent AVHRR channel allows for better separation of clear and cloudy pixels than does a global choice of a visible and/or infrared threshold. The classification also prevents erroneous estimates of large fractional cloudiness in areas of cloudfree snow and sea ice. The hybrid histogram-spatial coherence technique and the advantages of first classifying a scene in the polar regions are detailed. The complete Polar Cloud Pilot Data Set was analyzed and the results are presented and discussed
Deformation and annealing study of Nicraly
Extensive experiments were carried out on the ODS alloy Nicraly, (an alloy prepared by mechanical alloying and consolidating a powder blend consisting of 16% chromium, 4% aluminum, 2-3% yttria, balance nickel), in efforts to develop methods of controlling the grain size and grain shape of the material. The experiments fell into two general categories: variations in the annealing parameters using the as-extruded material as it was received, and various thermomechanical processing schedules (various combinations of cold work and annealing). Success was achieved in gaining grain size and grain shape control by annealing of the as-extruded material. By proper selection of annealing temperature and cooling rates, the grain size of the as-received material was increased almost two orders of magnitude (from an average grain dimension of 0.023 mm to 1.668 mm) while the aspect ratio was increased by some 50% (from 20:1 to 30:1). No success was achieved in gaining significant control of the grain size and shape of the material by thermo-mechanical processing
Influence of composition on the microstructure and mechanical properties of a nickel-base superalloy single crystal
The effects of cobalt, tantalum, and tungsten contents on the microstructure and mechanical properties of single crystal Mar-M247 were investigated. Elevated temperature tensile and creep-rupture properties of 001 oriented single crystals were related to microstructural features of the alloys. Substitution of Ni for Co in the high refractory metal alloys increased the lattice mismatch, which was considered to be the cause of the increases in tensile and creep strength. Substitution of Ni for Ta caused large decreases in tensile strength and creep life, consistent with decreases in gamma prime volume fraction, lattice mismatch, and solid solution hardening. Substitution of W for Ta resulted in decreased life at high stresses, which was related to small decreases in mismatch and volume fraction. However, the W substitution resulted in improved life at low stresses, which was related to solid solution strengthening by W
- …