127 research outputs found
Preparation and characterization of carbon nanofluid by a plasma arc nanoparticles synthesis system
Heat dissipation from electrical appliances is a significant issue with contemporary electrical devices. One factor in the improvement of heat dissipation is the heat transfer performance of the working fluid. In this study, we used plasma arc technology to produce a nanofluid of carbon nanoparticles dispersed in distilled water. In a one-step synthesis, carbon was simultaneously heated and vaporized in the chamber, the carbon vapor and particles were then carried to a collector, where cooling furnished the desired carbon/water nanofluid. The particle size and shape were determined using the light-scattering size analyzer, SEM, and TEM. Crystal morphology was examined by XRD. Finally, the characterization include thermal conductivity, viscosity, density and electric conductivity were evaluated by suitable instruments under different temperatures. The thermal conductivity of carbon/water nanofluid increased by about 25% at 50°C compared to distilled water. The experimental results demonstrated excellent thermal conductivity and feasibility for manufacturing of carbon/water nanofluids
Performance evaluation on an air-cooled heat exchanger for alumina nanofluid under laminar flow
This study analyzes the characteristics of alumina (Al2O3)/water nanofluid to determine the feasibility of its application in an air-cooled heat exchanger for heat dissipation for PEMFC or electronic chip cooling. The experimental sample was Al2O3/water nanofluid produced by the direct synthesis method at three different concentrations (0.5, 1.0, and 1.5 wt.%). The experiments in this study measured the thermal conductivity and viscosity of nanofluid with weight fractions and sample temperatures (20-60°C), and then used the nanofluid in an actual air-cooled heat exchanger to assess its heat exchange capacity and pressure drop under laminar flow. Experimental results show that the nanofluid has a higher heat exchange capacity than water, and a higher concentration of nanoparticles provides an even better ratio of the heat exchange. The maximum enhanced ratio of heat exchange and pressure drop for all the experimental parameters in this study was about 39% and 5.6%, respectively. In addition to nanoparticle concentration, the temperature and mass flow rates of the working fluid can affect the enhanced ratio of heat exchange and pressure drop of nanofluid. The cross-section aspect ratio of tube in the heat exchanger is another important factor to be taken into consideration
Loss of DNA mismatch repair facilitates reactivation of a reporter plasmid damaged by cisplatin
Adhesion of perfume-filled microcapsules to model fabric surfaces
The retention and adhesion of melamine formaldehyde (MF) microcapsules on a model fabric surface in aqueous solution were investigated using a customised flow chamber technique and atomic force microscopy (AFM). A cellulose film was employed as a model fabric surface. Modification of the cellulose with chitosan was found to increase the retention and adhesion of microcapsules on the model fabric surface. The AFM force–displacement data reveal that bridging forces resulting from the extension of cellulose chains dominate the adhesion between the microcapsule and the unmodified cellulose film, whereas electrostatic attraction helps the microcapsules adhere to the chitosan-modified cellulose film. The correlation between results obtained using these two complementary techniques suggests that the flow chamber device can be potentially used for rapid screening of the effect of chemical modification on the adhesion of microparticles to surfaces, reducing the time required to achieve an optimal formulation
Al2O3-based nanofluids: a review
Ultrahigh performance cooling is one of the important needs of many industries. However, low thermal conductivity is a primary limitation in developing energy-efficient heat transfer fluids that are required for cooling purposes. Nanofluids are engineered by suspending nanoparticles with average sizes below 100 nm in heat transfer fluids such as water, oil, diesel, ethylene glycol, etc. Innovative heat transfer fluids are produced by suspending metallic or nonmetallic nanometer-sized solid particles. Experiments have shown that nanofluids have substantial higher thermal conductivities compared to the base fluids. These suspended nanoparticles can change the transport and thermal properties of the base fluid. As can be seen from the literature, extensive research has been carried out in alumina-water and CuO-water systems besides few reports in Cu-water-, TiO2-, zirconia-, diamond-, SiC-, Fe3O4-, Ag-, Au-, and CNT-based systems. The aim of this review is to summarize recent developments in research on the stability of nanofluids, enhancement of thermal conductivities, viscosity, and heat transfer characteristics of alumina (Al2O3)-based nanofluids. The Al2O3 nanoparticles varied in the range of 13 to 302 nm to prepare nanofluids, and the observed enhancement in the thermal conductivity is 2% to 36%
Recommended from our members
Atmospheric stilling leads to prolonged thermal stratification in a large shallow polymictic lake
To quantify the effects of recent and potential future decreases in surface wind speeds on lake thermal stratification, we apply the one-dimensional process-based model MyLake to a large, shallow, polymictic lake, Võrtsjärv. The model is validated for a 3-year period and run separately for 28 years using long-term daily atmospheric forcing data from a nearby meteorological station. Model simulations show exceptionally good agreement with observed surface and bottom water temperatures during the 3-year period. Similarly, simulated surface water temperatures for 28 years show remarkably good agreement with long-term in situ water temperatures. Sensitivity analysis demonstrates that decreasing wind speeds has resulted in substantial changes in stratification dynamics since 1982, while increasing air temperatures during the same period had a negligible effect. Atmospheric stilling is a phenomenon observed globally, and in addition to recent increases in surface air temperature, needs to be considered when evaluating the influence of climate change on lake ecosystems
Violence and post-traumatic stress disorder in Sao Paulo and Rio de Janeiro, Brazil: the protocol for an epidemiological and genetic survey
Background: violence is a public health major concern, and it is associated with post-traumatic stress disorder and other psychiatric outcomes. Brazil is one of the most violent countries in the world, and has an extreme social inequality. Research on the association between violence and mental health may support public health policy and thus reduce the burden of disease attributable to violence. the main objectives of this project were: to study the association between violence and mental disorders in the Brazilian population; to estimate the prevalence rates of exposure to violence, post-traumatic stress disorder, common metal disorder, and alcohol hazardous use and dependence: and to identify contextual and individual factors, including genetic factors, associated with the outcomes.Methods/design: one phase cross-sectional survey carried out in São Paulo and Rio de Janeiro, Brazil. A multistage probability to size sampling scheme was performed in order to select the participants (3000 and 1500 respectively). the cities were stratified according to homicide rates, and in São Paulo the three most violent strata were oversampled. the measurements included exposure to traumatic events, psychiatric diagnoses (CIDI 2.1), contextual (homicide rates and social indicators), and individual factors, such as demographics, social capital, resilience, help seeking behaviours. the interviews were carried between June/2007 February/2008, by a team of lay interviewers. the statistical analyses will be weight-adjusted in order to take account of the design effects. Standardization will be used in order to compare the results between the two centres. Whole genome association analysis will be performed on the 1 million SNP (single nucleotide polymorphism) arrays, and additional association analysis will be performed on additional phenotypes. the Ethical Committee of the Federal University of São Paulo approved the study, and participants who matched diagnostic criteria have been offered a referral to outpatient clinics at the Federal University of São Paulo and Federal University of Rio de Janeiro
Review of thermo-physical properties, wetting and heat transfer characteristics of nanofluids and their applicability in industrial quench heat treatment
The success of quenching process during industrial heat treatment mainly depends on the heat transfer characteristics of the quenching medium. In the case of quenching, the scope for redesigning the system or operational parameters for enhancing the heat transfer is very much limited and the emphasis should be on designing quench media with enhanced heat transfer characteristics. Recent studies on nanofluids have shown that these fluids offer improved wetting and heat transfer characteristics. Further water-based nanofluids are environment friendly as compared to mineral oil quench media. These potential advantages have led to the development of nanofluid-based quench media for heat treatment practices. In this article, thermo-physical properties, wetting and boiling heat transfer characteristics of nanofluids are reviewed and discussed. The unique thermal and heat transfer characteristics of nanofluids would be extremely useful for exploiting them as quench media for industrial heat treatment
- …